QA Certificate
Certificate type
A45 Doc M incorporates modern, simple and robust design. Perfect for applications where hygiene is paramount. Ideal for disabled and most extra small sinks.
Combining the benefits of no-touch technology with water savings and robust reliable performance, no-touch automatic taps are an ideal choice for washrooms across a wide variety of applications, offering benefits to commercial and public sector environments. Suitable for use by the elderly or disabled and the superior heavy duty construction offers resistance to vandalism and misuse. DVS no-touch taps have been extensively developed and tested to achieve high levels of reliability and consistent performance, combined with attractive design options.
Benefits:
Applications:
Finish | Brushed chrome Polished chrome |
Color | Stainless Steel |
Features | Electronic hands-free tap with integral infra-red detection (and anti-vandal flow limitation) |
Material | Stainless steel, and cross-linked polyethylene Stainless steel, and copper |
Shape | 38mm Tubular shaft canted at 45 degrees |
Size | 139 x 55 x 116 mm (l x w x h) |
Uniclass 2015 | |
CAWS | N13/30 Washbasins N13/331 Sinks N13/335 Washbasins |
Product Reference | Aquarius No-Touch Taps |
Type | Insert requirements from 'Options' below. |
Finish | Brushed chromePolished chrome |
Tap kit | AT00-001Single station battery kit standard pressure. AT00-002Single station mains kit standard pressure. AT00-003Two station mains kit standard pressure. AT00-004Three station mains kit standard pressure. AT00-005Single station battery kit low pressure. AT00-006Single station mains kit low pressure. AT00-007Two station mains kit low pressure. AT00-008Three station mains kit low pressure. |
Standard product features | Material: Chrome plated heavy brass. |
Product Options | Type: The following options are available:
Consult manufacturer's literature for further information. Accessories: A wide range of tap control systems, wave-on sensors, tactile switches and other accessories are available to complete the system - consult manufacturer's literature for details. Controls: - Tap Control System: The tap control system can be used to control mixed water for one or two taps, or to control both hot and cold on a single tap using two sensors. The control system can be used with wave-on or tactile sensors. The tap control system also features built-in purge control option to avoid stagnation. When a user waves their hand past the sensor (or pushes the tactile switch) the control system activates the solenoid valve, the valve will then run for a pre-set time before automatically closing the valve and stopping the tap. - Purge controller: The automatic tap purge controller reduces the risk of Legionella by purging the taps if they have not been operated for a predefined time. Purge run times are adjustable and can be set between 5 seconds and 5 minutes. A periodic purge can be switched on or off. - Battery backup unit: The automatic tap battery backup unit will automatically switch from mains supply to battery in the event of a power failure (comes complete with AT00-024 battery pack). When mains power is restored the unit will switch back to mains supply. |
Platform | Compatible | Version | Certified to |
---|---|---|---|
![]() | Revit 2013 | 1.0 | 1.2 |