Aquaproof Wetroom Tanking System

The Aquaproof System has been developed specifically to prevent water leakage from tiled areas, including wetrooms, shower areas, bathrooms and kitchens. It is compatible with a wide range of substrates, including ply sheeting, shower tray formers, plasterboard, MDF, cementitious screed and most commonly available waterproof construction boards. The applied Aquaproof System can tolerate normal levels of movement in a room and does not become brittle with age. It is technically advanced and comes with a 10 year manufacturer’s warranty; it is also independently certified as meeting the requirements of ETAG 22 'watertight covering kits for wetroom floors and walls' and holds its own European Technical Approval certificate. By specifying Aquaproof, a fully tanked room will be achieved, preventing damage to walls/floors and leakage into adjacent rooms.


  • Fully waterproof.
  • Breathable (water vapour permeable).
  • Flexible.
  • Easy to tile with standard waterproof tile adhesives.
  • Simple to apply.
  • Silicone compatible.
  • Compatible with underfloor heating.
  • User friendly (virtually odour free).

General information

Uniclass 2015

Ss_32_20_95_15 Cold-applied liquid internal wall damp-proofing systemsPrimary


J30/10 Cold applied damp proofing

J30/130 Cold applied damp proofing . . . . . .

Specification data - Cold-applied liquid internal wall damp-proofing systems

Product Reference

Aquaproof Wetroom Tanking System

Aquaproof Pre-formed Corners

Not required


For the formation of extra secure internal and external corners.

Standard product features

System Components:

  • Aquaproof Primer: Solvent free, SBR based primer for all absorbent surfaces.
  • Aquaproof Tape: Fabric reinforced, elastic sealing tape for wall/floor junctions and other areas subject to stress.
  • Aquaproof Compound: Solvent free, sealing membrane supplied as a thick paste. Applied in 2–3 coats to give a 1 mm thick, robust and elastic rubber membrane.
  • Aquaproof Pipe Sleeves: 115 x 115 mm with an 8 mm hole.
  • Aquaproof Outlet Sleeve: 350 x 350 mm with a fabric border, ideal for sealing under the clamping ring of wet-floor waste outlets or around larger penetrations such as 100 mm waste pipes.

Third party certifications
  • ETA ETA-09/0200 according to "ETAG 22 : Watertight covering kits for wetroom floors and /or walls
Similar products from Koster Aquatecnic Ltd