NBS Source
I'm a manufacturer
Compare variants

AIRTRAK® PV Pitched Valley Ventilators - Roof Ventilation System

Verified by manufacturer 2 months ago

Airtrak PV10 Pitched Valley Ventilator

Nicholson STS Ltd Variant:

Provides continuous ventilation detail to a pitched valley between two roof pitches.

Jump to:
+44 (0) 1763 295828 Website

Application

For providing ventilation in a tiled or slated pitched valley down to 40° pitch. Lower pitches may be accommodated depending upon using wider slates or tiles if available.

  • E Version: For increased resistance to both wind uplift in exposed locations and corrosion in coastal locations, the ventilator can be supplied in 1.0 mm-thick, 316 grade stainless steel. Where extreme weather conditions are likely, consideration should be given to providing more weathering cover to upstands and slating or tiling to improve the integrity of the detail.
  • FR Version: To reduce spread of fire through ventilation apertures, the ventilator can be supplied with an intumescent seal.


Note: Standard AIRTRAK® details assume moderate weather conditions. Small amounts of moisture may be admitted under heavy storm conditions. Where more severe weather conditions are likely, consideration should be given to increasing the vertical overlap dimension to upstands and to slating or tiling to improve the integrity of the weathering detail. For slate and tile details the manufacturer also recommends the use of the AIRTRAK® LPS where appropriate. Contact manufacturer for further technical help.

Description

Provides continuous ventilation detail to a pitched valley between two roof pitches.

General information

Color

Silver

Finish

Metallic

Material

Stainless steel

Glass Reinforced Plastic (GRP)

Guidance for specification option:

Insect mesh.

Length

1000 mm

Width

170 mm

180 mm

Manufacturer guidance

Overall girth.

Warranty description

Ten year

Uniclass

Pr_30_59_29_82 Strip ventilatorsPrimary

CAWS

H60/615 Metal valleys

H60/66 Metal valleys

H61/615 Metal valleys

H61/66 Metal valleys

H62/615 Metal valleys

H62/66 Metal valleys

H65/615 Metal valleys

H65/66 Metal valleys

Specification data - Strip ventilators

Ventilation opening

10 mm continuous air gap equivalent.

Colour

Stainless steel.

Grade

304.

Dimensions

1000 x 170 mm.

Guidance for specification option:

Unit length x overall girth.

Type

Standard.

Sustainability data

Contains Red List materials

No

Country of material origin

United Kingdom

Country of product manufacture

United Kingdom

Recyclability

Recyclable at end of life

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

50 %

Literature

AIRTRAK Roof Void Ventilation System 2020

AIRTRAK Roof Void Ventilation System 2020

AIRTRAK-FR Fire Resistant Ventilators

AIRTRAK-FR Fire Resistant Ventilators

AIRTRAK PV Technical Data Sheet

AIRTRAK PV Technical Data Sheet

Case studies

AIRTRAK™ - St Johns Chapel

AIRTRAK™ - St Johns Chapel

AIRTRAK™ - Coal Drops Yard

AIRTRAK™ - Coal Drops Yard

Similar products from Nicholson STS Ltd

AIRTRAK®  CL Cladding Ventilator - Roof Ventilation System

AIRTRAK® CL Cladding Ventilator - Roof Ventilation System

AIRTRAK®  CS Comb Strip - Roof Ventilation System

AIRTRAK® CS Comb Strip - Roof Ventilation System

AIRTRAK®  CV Cheek Ventilator  - Roof Ventilation System

AIRTRAK® CV Cheek Ventilator - Roof Ventilation System

AIRTRAK®  IL Inline Ventilators - Roof Ventilation System

AIRTRAK® IL Inline Ventilators - Roof Ventilation System

AIRTRAK®  LB Layboard Ventilators - Roof Ventilation System

AIRTRAK® LB Layboard Ventilators - Roof Ventilation System

AIRTRAK®  MV Mansard Ventilators - Roof Ventilation System

AIRTRAK® MV Mansard Ventilators - Roof Ventilation System

AIRTRAK®  PRV Pitched Roof Ventilator - Roof Ventilation System

AIRTRAK® PRV Pitched Roof Ventilator - Roof Ventilation System

AIRTRAK®  VT Ventilated Edge Trim - Roof Ventilation System

AIRTRAK® VT Ventilated Edge Trim - Roof Ventilation System