Airtrak PE Pitched Eaves Ventilators
Provides an unobtrusive ventilation path into the roof void at the bottom of a pitched roof slope.
- Suitable for providing ventilation in metal, membrane and liquid roof coverings.
- E Version: For increased resistance to both wind uplift in exposed locations and corrosion in coastal locations, the ventilator can be supplied in 1.0 mm-thick, 316 grade stainless steel. Where extreme weather conditions are likely, consideration should be given to providing more weathering cover to upstands and slating or tiling to improve the integrity of the detail.
- FR Version: To reduce spread of fire through ventilation apertures, the ventilator can be supplied with an intumescent seal.
Note: Standard Airtrak details assume moderate weather conditions. Small amounts of moisture may be admitted under heavy storm conditions. Where more severe weather conditions are likely, consideration should be given to increasing the vertical overlap dimension to upstands and to slating or tiling to improve the integrity of the weathering detail. For slate and tile details the manufacturer also recommends the use of the Airtrak LPS where appropriate. Contact manufacturer for further technical help.
Provides an unobtrusive ventilation path into the roof void at the bottom of a pitched roof slope.
Features and benefits:
- After installation, the ventilator is covered by the flashing or roofing material.
- Available in different downstand dimensions.
- Supplied pre-bent to a specified angle.
- Can be combined with Airtrak CF ClipFast clips where it is possible that the flashing might slip off the ventilator over time and the welt disengage from the lower edge.
Applications:
- Suitable for providing ventilation in metal, membrane and liquid roof coverings.
- E Version: For increased resistance to both wind uplift in exposed locations and corrosion in coastal locations, the ventilator can be supplied in 1.0 mm-thick, 316 grade stainless steel. Where extreme weather conditions are likely, consideration should be given to providing more weathering cover to upstands and slating or tiling to improve the integrity of the detail.
- FR Version: To reduce spread of fire through ventilation apertures, the ventilator can be supplied with an intumescent seal.
Note: Standard Airtrak details assume moderate weather conditions. Small amounts of moisture may be admitted under heavy storm conditions. Where more severe weather conditions are likely, consideration should be given to increasing the vertical overlap dimension to upstands and to slating or tiling to improve the integrity of the weathering detail. For slate and tile details the manufacturer also recommends the use of the Airtrak LPS where appropriate. Contact manufacturer for further technical help.
Installation:
Consult manufacturer's literature for details.
| Material | Insect mesh: Vinyl-coated glass-reinforced plastic (GRP) |
| Uniclass 2015 |
| Product Reference | Airtrak PE Pitched Eaves Ventilators |
| Type | Airtrak PE100 Pitched Eaves VentilatorStandard. Airtrak PE100-E Pitched Eaves VentilatorIncreased exposure. Airtrak PE100-FR Pitched Eaves VentilatorFire resistant ventilator with intumescent seal. Airtrak PE120 Pitched Eaves VentilatorStandard. Airtrak PE120-E Pitched Eaves VentilatorIncreased exposure. Airtrak PE120-FR Pitched Eaves VentilatorFire resistant ventilator with intumescent seal. Airtrak PE150 Pitched Eaves VentilatorStandard. Airtrak PE150-E Pitched Eaves VentilatorIncreased exposure. Airtrak PE150-FR Pitched Eaves VentilatorFire resistant ventilator with intumescent seal. |
| Pitch | Insert requirement. |
| Airtrak CF ClipFast fixing clips | Not requiredAirtrak CF ClipFast clips, stainless steelAirtrak CF ClipFast clips, copper |
| Standard product features | Material: Insect mesh: Vinyl-coated glass-reinforced plastic (GRP). Length: 1000 mm. Ventilation: 25 mm continuous air gap equivalent. |
| Product Options | Size: - Airtrak PE100/ Airtrak PE100-FR:
- Airtrak PE100-E:
- Airtrak PE120/ Airtrak PE120-FR:
- Airtrak PE120-E:
- Airtrak PE150/ Airtrak PE150-FR:
- Airtrak PE150-E:
Intumescent seal (Airtrak PE100-FR/ PE120-FR/ PE150-FR only):
Airtrak CF ClipFast fixing clips: Fixing clip for securing lead flashings to the Airtrak ventilators to prevent flashing creep over time. Clips locate in the slots found in the lower edge of the ventilator; these slots are spaced at approximately 330 mm centres.
|