Crack resistant render system incorporating a high performance Dryvit finish.
Dryvit ACR systems are a range of 100% acrylic polymer based anti-crack renders designed to out-perform the shrinkage and cracking characteristics of traditional renders. The range offers a variety of coloured and textured coating options providing various levels of protection when used in the different component combinations. Dryvit ACR systems are generally installed over a Dryvit polymer modified re-profiling mortar where levelling is required, on to exterior concrete, brickwork, blockwork, plastered or painted surfaces in new build or refurbishment projects. Commonly applied over timber or steel framed substrates incorporating an approved sheathing and breather membrane in new build residential and low-rise commercial projects.
Benefits:
Finish | Dash receiver and dash aggregate Drytex Mineral based finish over-coated with Demandit or Silstar. Drytex wood Polymer modified cementitious render and acrylic stain used to create a wood effect. FDPMR Acrylic textured finish. HDP Silicone based technology textured finish. |
Uniclass 2015 | |
CAWS | M20/160 Proprietary cement gauged render M20/19 Proprietary render M20/5 Cement:sand (air entrained) |
Product Reference | ACR 50™ |
Finish | Dash receiver and dash aggregateDrytexMineral based finish over-coated with Demandit or Silstar. Drytex woodPolymer modified cementitious render and acrylic stain used to create a wood effect. FDPMRAcrylic textured finish. HDPSilicone based technology textured finish. PMRBAcrylic textured finish. SLKSilicate finish. |
Texture | 3–8 mm aggregateDash received and dash aggregate finish. FreestylePMRB finish. LymestoneHDP finish. Quarzputz 2 mm aggregateDrytex, FDPMR, HDP, PMRB and SLK finishes. Sandblast 1 mm aggregateDrytex, PMRB and SLK finishes. Sandpebble 1.5 mm aggregateFDPMR, HDP and PMRB finishes. Sandpebble fine 1 mm aggregateFDPMR, HDP and PMRB finishes. |
Colour | Refer to standard colour range for details and insert requirements. |
Accessories | Not requiredBellcast beadCorner beadDemanditInterior and exterior acrylic PMR coating in standard and custom colours, insert requirements. Dryvit detail meshApplied diagonally to corners of openings between passes of Stucco Build. Expansion jointalign with structural movement joints. External corner beadFeature beadsSilstarSilicone façade paint, insert colour requirements. Stop bead |
Standard product features | Re-profiling mortar: Stucco Build™, thickness: 4–6 mm (excluding dubbing out and keys). Base coat and reinforcement coat: Genesis (acylic-modified, fibre reinforced adhesive, base, texture and levelling coat and standard mesh - glass fibre reinforcing mesh. Thickness: 2–3 mm. Beads/ Trims: Dryvit Aluminium Starter Track to thickness of insulation mechanically fixed with suitable hammer head or self-tapping fixings to base of system. Primer: Color Prime™. |
Product Options | Pretreatment: Consult with Dryvit for details of preparation to suit project substrate. Use fungicidal wash by system manufacturer. If required, specify in 'Structural substrate' clause. Finish:
Brick effect finish or other from speciality finish range are also available, consult with manufacturer for details. Accessories:
|