NBS Source
I'm a manufacturer
Compare variants

Stannah Goodsmaster - 500-2000 kg CD Goods only lift & CD Plus Goods attendant lift -

Verified by manufacturer 2 months ago

Goodsmaster CD

Stannah Lifts Variant:
Third party certifications:
  • CHAS

    CHAS

    Certificate type

  • Health & Safety Accreditation

    Health & Safety Accreditation

    Certificate type

  • ISO 14001 Environmental Management Systems

    Certificate type

  • ISO 45001 Health and Safety Management

    Certificate type

  • ISO 9001 Quality Management

    Certificate type

Goods lift with carrying capacity of 500–2000 kg, option to carry up to two attendants.

Jump to:
+44 (0)1264 343777 Website

Application

Goodsmaster CD goods only lift:

500–2000 kg load capacity; low pit and headroom requirements; flexible car and shaft dimensions.


Goodsmaster CD Plus goods attended lift:

Suited to premises where the stairway is away from the lift shaft, or in cases where goods are being frequently moved e.g. bin/bike lift applications in residential flats requiring waste transfer.

Description

The Goodsmaster CD range offers a 500–2000 kg load capacity, with low pit and headroom requirements, together with flexible car and shaft dimensions.


The CD Plus (up to two attendants’ option) is suitable for use in premises where the stairway is away from the lift shaft, or in cases where goods are being frequently moved e.g. bin/ bike lift applications in residential flats requiring waste transfer. All lifts come with all the safety features required.


Features and benefits:

  • Car operating panel – key switch operation with constant pressure control and emergency stop switch.
  • Car entrance protection via full height light ray and robust collapsible car gate.
  • Alarm device with battery backup and emergency lighting
  • Lift car widths and depths can be tailored to suit exact requirements, from 1000 to 2000 mm in 100 mm increments.
  • Structure-supported frame with no requirement for load bearing shaft, only lateral support.
  • Low pit and headroom requirements for all models.
  • The lift operates inside a rapidly erected structure supported frame that is easy to install and requires minimal builder's work. No separate lifting beam is required.
  • Shaft cladding in non-fire rated black (RAL 9005) sheet steel is included.
  • No separate motor room is required; the control cabinet is mounted to suit site requirements.
  • Quiet and efficient chain drive with VVVF operation for greater levelling accuracy, stand-by mode and led lighting - all these features are consistent with BREEAM requirements for a lift.

A solid flat base, support at each floor and at the top, together with a pre-formed lift shaft supplied by the builder, is usually all that is required.

Safety: All Goodsmaster CD models comply fully with the essential safety requirements of The Machinery Directive 2006/42/EC.


Technical characteristics:

  • Controls: Fully automatic push button control with call and despatch facilities and a stop switch at each landing entrance.
  • Pit depth: 100 mm required as standard. Optional ramp available where no pit is possible.
  • Speed: 0.15 m/s nominal for all models.
  • Travel: Up to three stops over a total distance of 9 m.
  • Headroom: Internal car height + 700 mm (2700 mm as standard).
  • Overload: Load weighing device with audible overload signal on all models.

General information

Color

Black

Guidance for specification option:

RAL 9005.

Other

Guidance for specification option:

Natural.

Finish

Galvanized

Powder-coated

Material

Steel

Shape

Rectangle

Square

Length

1000 mm

1100 mm

1200 mm

1300 mm

1400 mm

Show more

Manufacturer guidance

In 100 mm increments.

Width

1000 mm

1100 mm

1200 mm

1300 mm

1400 mm

Show more

Manufacturer guidance

In 100 mm increments.

Height

1800 mm

1900 mm

2000 mm

2100 mm

2200 mm

Warranty description

One year

Guidance for specification option:

Included as standard.

Uniclass

Ss_80_50_01_05 Electric accessible goods-only lift (AGOL) systemsPrimary
Ss_80_50_01_26 Electric service lift systems

CAWS

X12/110 Vertical lifting platform systems

X12/350 Platform lifts

X12/110 Vertical lifting platform systems

Product range

Service & Goods lifts

Specification data - Electric accessible goods-only lift (AGOL) systems

Lift type

Goods lift with attendant option.

Lift components

Lift cars.

Door configuration

Single entrance.

Through-car.

Drive position

Top drive.

Guidance for specification option:

Electric motor drives a high-quality reduction gearbox with two roller chains directly attached.

Efficient and quiet in operation it is mounted at the top of the lift’s structure within the shaft.

Speed control

Single-speed.

Rated load

500 kg.

1000 kg.

1500 kg.

2000 kg.

Car

Manufacturer's standard.

Guidance for specification option:

Car interior: 

  • Finish: Constructed from mild steel sheeting; finished in pebble grey epoxy RAL 7032 with tough aluminium chequer plate floor.
  • Ceiling: Galvanized sheet steel ceiling incorporating twin fluorescent tube lighting.

Width

1000 mm.

1100 mm.

1200 mm.

1300 mm.

1400 mm.

Show more

Manufacturer guidance

Lift car.

Depth

1000 mm.

1100 mm.

1200 mm.

1300 mm.

1400 mm.

Show more

Manufacturer guidance

Lift car.

Height

2000 mm.

Guidance for specification option:

Standard.

1800 mm.

1900 mm.

2100 mm.

2200 mm.

Manufacturer guidance

Internal car height.

Door clear height

As height.

Controller

600 x 260 x 1050 mm.

Guidance for specification option:

Width x depth x height.

Can be mounted adjacent to the lift shaft on any floor.

Accessories

None.

Bump rails.

Chequer plate ramp.

Guidance for specification option:

For use where it is not possible to provide a pit.

Intercom system.

Guidance for specification option:

Positioned at each landing entrance.

Full height infra-red detector.

Guidance for specification option:

Attendant option, Goodsmaster CD Plus only.

Show more

Drive space

Machine room-less.

Sustainability data

Contains Red List materials

No

Country of material origin

Spain

Country of product manufacture

Spain

Recyclability

Metal parts can be recycled

Third party certifications

CHAS

CHAS

CHAS – Contractors Health and Safety Assessment Scheme SSIP

Health & Safety Accreditation

Health & Safety Accreditation

Certificate of Health & Safety Accreditation

ISO 14001 Environmental Management Systems

ISO 14001 Environmental Management Systems

ISO 14001 Environmental Management

ISO 45001 Health and Safety Management

ISO 45001 Health and Safety Management

ISO 45001 Health and Safety Management

ISO 9001 Quality Management

ISO 9001 Quality Management

ISO 9001 Quality Management

Literature

Stannah Goodsmaster CD - Goods & Goods Attendant Lifts brochure

Stannah Goodsmaster CD - Goods & Goods Attendant Lifts brochure

Stannah Goodsmaster CD & CD Plus User Manual

Stannah Goodsmaster CD & CD Plus User Manual

Case studies

3 Stannah goods lifts support growing CLEAN Yeovil laundry

3 Stannah goods lifts support growing CLEAN Yeovil laundry

A Stannah Goods Lift Solves Bike/Bin Storage in City Office Refurb

A Stannah Goods Lift Solves Bike/Bin Storage in City Office Refurb

Similar products from Stannah Lifts

Stannah Microlift 50kg & 100kg dumbwaiter service lift

Stannah Microlift 50kg & 100kg dumbwaiter service lift

Stannah Trolleylift 250-500 kg floor level service lift

Stannah Trolleylift 250-500 kg floor level service lift