NBS Source
List your products

This product is no longer available

Description

Goodsmaster lifts offer a solution to moving large loads with or without an attendant. The Goodsmaster Classic is designed to move goods only, includes four capacity options (500, 750, 1000 and 1500 kg) with a range of car sizes.

Features:

  • Can be installed almost anywhere, including through or adjacent to a mezzanine floor.
  • Structure-supported for easy installation and reduced builders’ work – contact Stannah for further details.
  • Fully automatic push button controls at all landing levels.
  • Single or double hinged landing doors or concertina gates.
  • Car gate as standard.
  • Lift arrival buzzer.

The lift is supplied in a structure supported frame which does not need load bearing shaft walls. A solid flat base, support at each floor and at the top, together with a pre-formed lift shaft supplied by the builder, is usually all that is required.

Goodsmaster Classic models comply with the Essential Safety Requirements (ESRs) of the Supply of Machinery (Safety) Regulations, also known as the Machinery Directive.

General information
Features

Can be installed almost anywhere, including through or adjacent to a mezzanine floor

Structure-supported for easy installation and reduced builders’ work – contact Stannah for further details

Fully automatic push button controls at all landing levels

Single or double hinged landing doors or concertina gates

Car gate as standard

Lift arrival buzzer

The lift is supplied in a structure supported frame which does not need load bearing shaft walls. A solid flat base, support at each floor and at the top, together with a pre-formed lift shaft supplied by the builder, is usually all that is required

Goodsmaster Classic models comply with the Essential Safety Requirements (ESRs) of the Supply of Machinery (Safety) Regulations, also known as the Machinery Directive

Finish

Car interior: Manufactured from mild steel sheeting, finished in tough grey backed enamel (RAL 7038) with heavy-duty vinyl covered floor. Ceiling incorporates twin 18W fluorescent tube lighting and an electrically interlocked maintenance access hatch

Uniclass 2015
Electric lift systems (Ss_80_50_60_26)Primary
Specification data - Electric lift systems
Product Reference

Goodsmaster Classic

Type

500B

Single hinged door, 500 kg capacity.

750B

Single hinged door, 750 kg capacity.

1000B

Single hinged door, 1000 kg capacity.

500EU

Double hinged door, 500 kg capacity.

750EU

Double hinged door, 750 kg capacity.

1000EU

Double hinged door, 1000 kg capacity.

750S

Single hinged door, 750 kg capacity.

1000S

Single hinged door, 1000 kg capacity.

750XDS

Double hinged door, 750 kg capacity.

1000D

Double hinged door, 1000 kg capacity.

1000DS

Double hinged door, 1000 kg capacity.

1500D

Double hinged door, 1500 kg capacity.

1500DS

Double hinged door, 1500 kg capacity.

Configuration

As drawing

Insert details.

Accessories

None

Bump rails

Chequer plate ramp

Galvanized collapsible concertina gate

Intercom system positioned at each landing entrance

Load weighing

Non fire rated motor room cabinet in RAL 7038

Non fire rated sheet shaft cladding in RAL 7038

Standard product features

Size (w x d x h):

- Car:

  • 500B, 750B and 1000B: 1060 x 1230 x 2000 mm (1010 mm door width).
  • 500EU, 750EU, and 1000EU: 1360 x 1230 x 2000 mm (1305 mm door width).
  • 750S and 1000S: 1060 x 1730 x 2000 mm (1010 mm door width).
  • 1000D and 1500D: 1460 x 1430 x 2000 mm (1410 mm door width).
  • 1000DS and 1500DS: 1460 x 1730 x 2000 mm (1410 mm door width).
  • 750XDS: 1460 x 2130 x 2000 mm (1410 mm door width).

Car depth: With a through car entrance arrangement, the inside car depth reduces by 25 mm nominal.

- Entrance:

  • 500B, 750B, 1000B, 750S and 1000S: 1010 x 2000 mm.
  • 500EU, 750EU, and 1000EU: 1310 x 2000 mm.
  • 750XDS, 1000D, 1500D, 1000DS and 1500DS: 1410 x 2000 mm.

Door clear height:

2000 mm (1800–2200 mm available on request, consult manufacturer for details).

Finish:

Car interior: Manufactured from mild steel sheeting, finished in tough grey backed enamel (RAL 7038) with heavy-duty vinyl covered floor. Ceiling incorporates twin 18W fluorescent tube lighting and an electrically interlocked maintenance access hatch.

Speed:

0.13–0.20 m/s, depending on model and capacity.

Travel:

Up to five stops over a total distance of 15 m.

Controls:

Fully automatic push button control with call and despatch facilities at each landing entrance.

- Indicators:

'Lift arrival', 'lift occupied' and 'lift position' indicators and audible lift arrival buzzers are fitted at each floor.

Drive unit:

The 3 kW motor drives a high quality reduction gearbox fitted with 2:1 traction roping (3:1 on 1500 kg models). Efficient and quiet in operation, mounted on a bedplate fixed to the lift' structure (external to the shaft) which can be positioned on either side of an entrance at any floor.

Power supply:

A 415V three phase supply is required with isolator adjacent to the lift motor.

Car entrance protection:

A collapsible gate is fitted to the lift car entrance(s).

Pit:

150 mm. Ramp optional.

Headroom:

3000 mm (3200 mm for 1500 kg).

Product Options

Configuration:

Single entrance or opposite through-car variations are available, consult manufacturer for details.

Similar products from Stannah Lifts