NBS Source
List your products
Description

The Goodsmaster CD range offers a load capacity of up to 2000 kg, with low pit and headroom requirements, together with flexible car and shaft dimensions.

The CD Plus (up to two attendants option) is ideal for use in premises where the stairway is away from the lift shaft, or in cases where goods are being frequently moved e.g. bin/bike lift applications in residential flats requiring waste transfer. All lifts come with all the safety features required for a goods passenger lift.

Features:

  • Car operating panel – key switch operation with constant pressure control and emergency stop switch
  • Car entrance protection via full height light ray and robust collapsible car gate
  • Alarm device with battery backup and emergency lighting
  • Lift car widths and depths can be tailored to suit your exact requirements, from 1000mm to 2000mm in 100mm increments.
  • Structure-supported frame with no requirement for load bearing shaft, only lateral support.
  • Low pit and headroom requirements for all models.
  • The lift operates inside a rapidly erected structure supported frame that is easy to install and requires minimal builder's work. No separate lifting beam is required
  • Shaft cladding in non-fire rated black (RAL9005) sheet steel is included.
  • No separate motor room is required; the control cabinet is mounted to suit site requirements.
  • Quiet and efficient chain drive with VVVF operation for greater levelling accuracy, stand-by mode and led lighting - all these features are consistent with BREEAM requirements for a lift.

A solid flat base, support at each floor and at the top, together with a pre-formed lift shaft supplied by the builder, is usually all that is required.

Goodsmaster Classic models comply with the Essential Safety Requirements (ESRs) of the Supply of Machinery (Safety) Regulations, also known as the Machinery Directive.

General information
Features

Car operating panel – key switch operation with constant pressure control and emergency stop switch

Car entrance protection via full height light ray and robust collapsible car gate

Alarm device with battery backup and emergency lighting

Lift car widths and depths can be tailored to suit your exact requirements, from 1000mm to 2000mm in 100mm increments

Structure-supported frame with no requirement for load bearing shaft, only lateral support

Low pit and headroom requirements for all models

The lift operates inside a rapidly erected structure supported frame that is easy to install and requires minimal builder's work. No separate lifting beam is required

Shaft cladding in non-fire rated black (RAL9005) sheet steel is included

No separate motor room is required; the control cabinet is mounted to suit site requirements

Quiet and efficient chain drive with VVVF operation for greater levelling accuracy, stand-by mode and led lighting - all these features are consistent with BREEAM requirements for a lift

A solid flat base, support at each floor and at the top, together with a pre-formed lift shaft supplied by the builder, is usually all that is required

Goodsmaster Classic models comply with the Essential Safety Requirements (ESRs) of the Supply of Machinery (Safety) Regulations, also known as the Machinery Directive

Uniclass 2015
Electric lift systems (Ss_80_50_60_26)Primary
Specification data - Electric lift systems
Product Reference

Goodsmaster CD

Rated load

500 kg

1000 kg

1500 kg

2000 kg

Size -
Width

1000–2000 mm, in 100 mm increments. Insert requirements.

Depth

1000–2000 mm, in 100 mm increments. Insert requirements.

Entry

Single entrance

Through-car

Type

Single hinged

Finished in black sheet steel RAL9005.

Double hinged

Finished in black sheet steel RAL9005.

Galvanised collapsible concertina gate

Accessories

None

Bump rails

Chequer plate ramp

Intercom system positioned at each landing entrance

Full height infra-red detector

Attendant option, Goodsmaster CD Plus only.

Key operated car operating panel with constant pressure pushes and stop switch

Attendant option, Goodsmaster CD Plus only.

Standard product features

Car height:

2000 mm.

Speed:

0.15 m/s nominal for all models.

Travel:

Up to three stops over a total distance of 9 m of travel.

Door clear height:

2000 mm (1800–2200 mm available on request, consult manufacturer for details).

Car interior:

  • Finish: Constructed from mild steel sheeting; finished in pebble grey epoxy RAL7032 with tough aluminium chequer plate floor.
  • Ceiling: Galvanized sheet steel ceiling incorporating twin fluorescent tube lighting.

Car entrance protection:

Collapsible gate.

Controls:

Fully automatic push button control with call and despatch facilities and a stop switch at each landing entrance.

Drive unit:

Electric motor drives a high quality reduction gearbox with two roller chains directly attached. Efficient and quiet in operation it is mounted at the top of the lift’s structure within the shaft.

Overload:

Load weighing device with audible overload signal on all models.

Pit:

100 mm required. Ramp optional.

Headroom:

2700 mm (car height + 700 mm).

Safety:

All Goodsmaster CD models comply fully with the essential safety requirements of The Machinery Directive 2006/42/EC.

Controller size (w x d x h):

600 x 260 x 1050 mm, can be mounted adjacent to the lift shaft on any floor.

Product Options

Configuration:

Single entrance or opposite through-car variations are available, consult manufacturer for details.

Similar products from Stannah Lifts