03 - H/D Laminate Lockers - Wet Use

Height:

1775 mm.

Construction:

Spot welded and pop riveted.

• Door frame assembly: Comprises two uprights manufactured from stainless steel of press formed channel section. Spot welded construction produces a rigid frame enabling door clearances to be maintained in accordance with British Standard requirements.

• Doors: 10 mm-thick plant-on doors, attached to the right hand side of door frame upright with semi-concealed 'five knuckle' 180° hinges. sprung or un-sprung.

• Bottom: Formed as a 55 mm-high plinth. All edges have return bends and the front and rear edges drilled for fitting to stands or stands with seat.

• Shelf: The one compartment locker is fitted with a shelf 315 mm from the top, giving a clear 250 mm opening, allowing adequate space for the average crash helmet with chin protector, or other articles.

• Hook and hanger rails are supplied in one and two compartment lockers: A coat hook is located each side of the main compartment under the shelf; for lockers over 300 mm-deep, a plastic coated clothes hanger rail is also fitted.

Fixing:

Lockers must be firmly secured to wall or floor (if stands are required) and fixed together in runs for safety purposes.

Width:

Allow 4 mm extra on the width for the rivets.

Locking:

• Combination lock: Door-mounted combination lock with master key over-ride facility and user codes which can be reset.

• Latch lock: For user’s own padlock (recommended padlock shank: 6 mm). Consult manufacturer for recommended padlocks.

• Refund/ collect lock: Coin operated, master keyed user access by key on pin or wristband using coin or token specified. Accepts most European coins.

• Ten-disc tumbler cam lock: Mastered suite with two keys to each lock.

Accessories:

Additional costs apply; consult manufacturer for details.

- Numbering:

• Engraving: Centrally positioned at the top of the door. Numbers can comprise one to four digits.

• Plate: Plastic oval number plate recessed into the door, centrally positioned at the top. Numbers can comprise one to four digits.

- Sloping top:

Height increase at rear:

• 300 mm-deep unit: 100 mm.

• 380 mm-deep unit: 126 mm.

• 450 mm-deep unit: 150 mm.