NBS Source
I'm a manufacturer

Resin Flooring System Resuflor Topcoat Profile

Verified by manufacturer 25 days ago

Sherwin-Williams Third party certifications:
  • ISO 14001 Environmental Management Systems

    Certificate type

  • ISO 9001 Quality Management

    Certificate type

High build epoxy flooring coating system with a light, non-slip texture.

Jump to:
+44 (0)1204 521771 Website

Application

Epoxy flooring coating system suitable for use in:

  • Food processing and beverage areas.
  • Chemical plant rooms.
  • Engineering workshops.
  • Automotive and aviation areas.
  • Factory units.
  • Warehouses.
  • Suitable for all demarcation and walkways.

Description

A high build epoxy resin system with a light non-slip texture achieved by adding an aggregate to the mix which stays suspended whilst the product is installed for a consistent finish. Applied by roller and paint brush, the system is low odour and provides a textured gloss coloured finish at approximately 500 micrometers thickness, which is suitable for all areas of industry where a hard-wearing non-slip and chemically resistant floor coating is required.


Features and benefits:

  • High build finish.
  • Non-slip performance.
  • Solvent-free.
  • Hygienic and easily cleaned.
  • Good colour stability.
  • Excellent slip resistance with the inclusion of selected aggregates.
  • High gloss finish.
  • Available in a wide range of colours.

General information

Color

Black

Blue

Green

Grey

Red

Show more

Finish

Gloss

Guidance for specification option:

High gloss.

Material

Epoxy resin

Resin

Epoxy

Length

Bespoke

Width

Bespoke

Height

Bespoke

Uniclass

Ss_30_42_54_75 Resin flooring systemsPrimary

CAWS

M12/10 Resin flooring

M12/110 Resin flooring

Specification data - Resin flooring systems

Substrate

-

Testing

Moisture content to BS 8204.

Preparation

Preparation of existing substrates.

Guidance for specification option:

Substrates must be clean, sound, dry and free of surface laitance with a minimum strength of 25 N/mm². Mechanically prepare substrate to provide a surface texture that will function as a key for the resin. Remove all dust and debris. Repair significant mechanical damage, pitting and cracks.

Primer

Not required.

Resuseal WB clear.

Guidance for specification option:

Optional.

Resin coating primers.

Resin flooring

Resucoat HB .

Guidance for specification option:

Base coat.

Resucoat HB with aggregate mix.

Guidance for specification option:

Top coat.

Resin floor coatings.

Floor seals.

High-build floor coatings.

Execution

Workmanship.

Application of primers.

Surface abrading and polishing.

Applying surface sealers.

Applying surface finishes.

System thickness

0.5 mm.

Reaction to fire (to EN 13501-1)

Bfl-s1.

Curing time

12—16 hours.

Guidance for specification option:

(at 20ºC) Light traffic.

48—72 hours.

Guidance for specification option:

(at 20ºC) Designed traffic.

≤7 days.

Guidance for specification option:

(at 20ºC) Full cure traffic.

Abrasion resistance

To ASTM D4060-14, 134.7 mg.

Guidance for specification option:

Loss/ 1000 cycles.

CompressiveStrength

To BS EN ISO 604, 9.6 MPa.

TensileStrength

To BS EN ISO 527-2, 7.5 MPa.

Flexural strength

To BS EN 13892-8, 3.2 N/mm².

Bond strength

To BS EN 13892, >3 N/mm².

Guidance for specification option:

Substrate failure.

Temperature resistance

45°C.

Manufacturer guidance

Tolerant of temperatures up to:

Chemical resistance

Good.

UV stabilization

No.

Slip resistance

To BS 7976-2, >36.

Colour

Red.

Light Grey.

Dark Grey.

Blue.

Green.

Show more

Finish:

High gloss.

Performance

-

Manufacturer guidance

  • Slip resistance.
  • Durability.
  • Water and vapour resistance.
  • Compliance with performance requirements.
  • Compliance with performance requirements.

Testing

-

Manufacturer guidance

  • Testing slip resistance.
  • Testing bond strength.
  • Verification of performance.

Sustainability data

Country of product manufacture

United Kingdom

Third party certifications

ISO 14001 Environmental Management Systems

ISO 14001 Environmental Management Systems

ISO 14001

ISO 9001 Quality Management

ISO 9001 Quality Management

ISO 9001

Literature

Resin flooring Resuflor Topcoat Profile coating system

Resin flooring Resuflor Topcoat Profile coating system

A guide to Sherwin-Williams Industrial Resin Flooring

A guide to Sherwin-Williams Industrial Resin Flooring

RAL Colour Card - Resuflor™, Resupen, Resutile™

RAL Colour Card - Resuflor™, Resupen, Resutile™

Case studies

Sherwin-Williams non-slip flooring solution provides a premier solution for Manchester City Football Club's Etihad Stadium

Sherwin-Williams non-slip flooring solution provides a premier solution for Manchester City Football Club's Etihad Stadium

Similar products from Sherwin-Williams

Resin Flooring System Elladur Topcoat

Resin Flooring System Elladur Topcoat

Resin Flooring System Elladur™ Deco Flake SF

Resin Flooring System Elladur™ Deco Flake SF

Resin Flooring System Elladur™ Deco Flake SL

Resin Flooring System Elladur™ Deco Flake SL

Resin Flooring System Elladur™ Deco Quartz SF

Resin Flooring System Elladur™ Deco Quartz SF

Resin Flooring System FasTop SL45 SRA

Resin Flooring System FasTop SL45 SRA

Resin flooring system FasTop™ RS69

Resin flooring system FasTop™ RS69

Resin Flooring System FasTop™ SL23

Resin Flooring System FasTop™ SL23

Resin Flooring System FasTop™ SL45

Resin Flooring System FasTop™ SL45

Resin Flooring System FasTop™ SL45 WBU

Resin Flooring System FasTop™ SL45 WBU

Resin flooring system FasTop™ TG69 - Resin floor screed

Resin flooring system FasTop™ TG69 - Resin floor screed