NBS Source
I'm a manufacturer

Application

Suitable for ventilated façades in new and refurbishment projects with terracotta and stone cladding materials.

Description

The ventilated façade one layer system consists of vertical aluminium profiles and thermal bridge-free brackets (MFT-FOX VT), designed for vertical one layer profile substructure for fastening terracotta, ceramic or natural stone panels with clamps on ventilated façade. The brackets are designed with both fixed and flexible point to allow for thermal expansion of the profile.


The first layer vertical profiles are fastened to the thermal bridge-free brackets, MFT-FOX VT, with specially design stainless steel screws S-AD, to allow movement of the profiles relative to the wall brackets due to flexible points and to keep the profile connected to the wall brackets due to the fixed points. The vertical profiles are specially designed for fastening the cladding with aluminium clamps which are secured to the profile by screws or rivets.


Features and benefits:

  • Flexible design using fixed and flexible points.
  • 40 mm adjustment capability of the profiles on the wall brackets.
  • Powder coated bracket base plate for corrosion resistance.
  • Bracket length: 140–320 mm.
  • Brackets can be installed using a range of methods - anchors, screws and direct fastening.
  • Aluminium profiles according to EN 755-2; EN 573-3; EN 12020-2; EN 1090-3; EN AW 6063 T66 and EN1090.
  • Substructures can be designed with PROFIS Facade to create technically sound, cost-efficient solutions.
  • Thermal bridge calculation in accordance with EN ISO 10211-1.
  • Anti-twist security of the clamps during panels installation.

General information

Finish

Powder coated

Material

Aluminium

Length

140 mm

320 mm

Manufacturer guidance

Bracket length, 140–320 mm.

Uniclass

Pr_20_85_20_04 Aluminium carrier railsPrimary

CAWS

G10/150 Steel framing system

G10/20 Steel framing system

H92/120 Rainscreen cladding

Specification data - Aluminium carrier rails

Standards

EN 755-2.

EN 573-3.

EN 12020-2.

EN 1090-3.

EN AW 6063 T66.

EN 1090.

Factory finish

Powder coating.

Thermal break

EN ISO 10211-1.

Bracket length

140–320 mm.

Type

MFT-FOX VT M / L.

Fastener

HIT-HY.

HRD-H.

HSA-R.

HST-R.

HUS-HR.

Show more

Type

MFT-L.

MFT-T.

Fastener

S-AD.

Accessories

None.

Clamp MFT-CTB bottom.

Clamp MFT-CTT.

Middle clamp MFT-CTM.

S-AD LHS fastener.

Similar products from Hilti (Gt Britain) Ltd

MFT-FOX H-1L-Rivets-Screws

MFT-FOX H-1L-Rivets-Screws

MFT-FOX H-2L-Adhesive-Rivets-Screws

MFT-FOX H-2L-Adhesive-Rivets-Screws

MFT-FOX H-2L-Adhesive-Rivets-Screws-Wind Membrane

MFT-FOX H-2L-Adhesive-Rivets-Screws-Wind Membrane

MFT-FOX HT-1L-Rivets-Screws

MFT-FOX HT-1L-Rivets-Screws

MFT-FOX HT-2L-Adhesive-Rivet-Screw

MFT-FOX HT-2L-Adhesive-Rivet-Screw

MFT-FOX VT-1L-Adhesive-Rivets-Screws

MFT-FOX VT-1L-Adhesive-Rivets-Screws

MFT-FOX VT-1L-Bolt

MFT-FOX VT-1L-Bolt

MFT-FOX VT-1L-Clamps-Stainless Steel

MFT-FOX VT-1L-Clamps-Stainless Steel

MFT-FOX VT-2L-Hangers-Undercut Anchors

MFT-FOX VT-2L-Hangers-Undercut Anchors

MFT-FOX VT-2L-SZ-20

MFT-FOX VT-2L-SZ-20