Sammenlign

WATERSTOP-RX® - Hydrophilic strip waterstop

Name: WATERSTOP-RX® - Hydrophilic strip waterstop
Brand: CETCO
SKU: tfvXyhdKWvfxKM2YQ37T5f

Verifisert av produsent for 5 måneder siden

WATERSTOP-RX 101

CETCO

Produktsertifiseringer:

BBA Agrément Certificate
Sertifikattype

An expanding concrete joint waterstop.

Gå til:

BOS

00 44 + (0) 7701315742 Nettside

Applikasjon

Suitable for:

Vertical and horizontal non-moving concrete construction joints.
New to existing concrete construction.
Irregular surfaces.
Around through-wall penetrations, such as plumbing and utility pipes.
Sealing around penetrations, concrete pilings and steel H-piles passing through the slab.
Both continuous hydrostatic and intermittent hydrostatic conditions.

Beskrivelse

A hydrophilic strip waterstop designed to stop water infiltration through cast-in-place concrete construction joints, by expanding upon contact with water to form a positive seal against the concrete.

Features and benefits:

Expands to seal and fill voids and cracks in the concrete.
Active waterstop designed to replace passive PVC/ Rubber dumbbell waterstops, thereby eliminating the requirement of special pieces, split-forming and seam welding.
Has been successfully tested by independent testing firms to over 60 meters of hydrostatic water pressure, under both continuous immersion and wet/ dry-cycling.
WATERSTOP-RX® 101 is produced in a rectangular shape measuring 25 x 20 mm and WATERSTOP-RX® 103 is produced in a rectangular shape measuring 20 x 10 mm.
Though WATERSTOP-RX® possesses good resistance to many chemicals, the waterstop is not intended to be used as the primary joint sealant for chemical containment vessels.
Consult manufacturer for guidance regarding chemical compatibility for secondary chemical containment applications.
Additionally, WATERSTOP-RX® is not an expansion joint sealant; contact CETCO for expansion joint applications.
Designed for reinforced structural concrete with a minimum of 20 N/mm² compressive strength.
RX-101 is designed for concrete 200 mm thick or greater with two rows of reinforcing steel.
RX-103 is designed for vertical concrete 150 mm thick or greater; and horizontal concrete no less than 100 mm thick. It should be used in concrete with one row of steel reinforcement, concrete curbs, planter walls, fountains and lightweight structural concrete.
Can be used around pipe and structural penetrations.
CETSEAL is required to secure WATERSTOPRX ® to metal or PVC (pipe) surfaces. Mechanical fixings should be used with REVO-FIX to secure WATERSTOP-RX; and fixings can be used in conjunction with CETSEAL.
WATERSTOP-RX® is not a self-adhering product. Either CETSEAL or REVO-FIX are required to secure WATERSTOP-RX® to concrete.
Mechanical fixings should not be used to secure WATERSTOP-RX alone. Do not use any other adhesive or construction sealant apart from CETSEAL to secure WATERSTOP-RX®.
WATERSTOP-RX® is not designed, nor intended to function as an expansion joint sealant. For precast concrete applications, contact manufacturer for product suitability and for any special installation requirements.
WATERSTOP-RX® products are designed for structural concrete with a minimum of 20 N/mm² compressive strength.

Generell informasjon

Form	Rectangle
Lengde	25 mm Veiledning for spesifikasjonsvalg: Roll length 5 m.
Bredde	20 mm

Uniclass	Pr_35_90_15_74 Hydrofile vannstopper i gummiPrimær
CAWS	E40/320 Hydrophilic waterstops

Spesifikasjonsdata - Hydrofile vannstopper i gummi

Klassifiseringsdata
Certification	BBA Certificate.
Cross section	25 x 20 mm.
Adhesive	Not required. CETSEAL adhesive. Veiledning for spesifikasjonsvalg: CETSEAL is a multi-purpose, single component polyether moisture cure adhesive used to secure WATERSTOP-RX® into position. Apply a continuous bead of CETSEAL to substrate then install WATERSTOP-RX® before CETSEAL skins over and cures. Adhesive yield will vary with use, substrate and application.
Accessories	Not required. REVO-FIX 101. Veiledning for spesifikasjonsvalg: REVO-FIX is a steel mesh used to mechanically secure WATERSTOP-RX® into position using the accompanying supplied fixings.
Roll length	5 m. Veiledning for spesifikasjonsvalg: Minimum quantity per carton: 30 m.
Coverage (minimum)	75 mm (concrete). Veiledning for spesifikasjonsvalg: WATERSTOP-RX® should only be used in applications where the product is completely encapsulated within the concrete. WATERSTOP-RX® should not be pre-hydrated by being subjected to submersion or remain in extended contact with water prior to encapsulation in concrete. If the product exhibits considerable swell prior to encapsulation in the concrete, it must be replaced with new material. In conditions where severe ground water chemical contamination exists, or is expected, consult manufacturer for product chemical compatibility information.
Hydrostatic resistance	70 m (independent test). Veiledning for spesifikasjonsvalg: Wet/ Dry Cycling (25 Cycles at 70 m): No Effect (independent test).
Adhesion to concrete	Excellent (independent test) using CETSEAL. Veiledning for spesifikasjonsvalg: Wet/ Dry Cycling (25 Cycles at 70 m): No Effect (independent test).
CompressiveStrength	Concrete substrate: 20 N/mm² (minimum).