LicataTherm Timber Frame Mineral Wool External Wall Insulation System - All Finishes - External Wall Insulation System
Verifisert av produsent for 4 måneder siden
External Wall Insulation System on timbeframe substrates, and cement boards, with mineral wool insulation with a choice of mineral or clay brick slips, or a coloured render for the decorative finish.
Applikasjon
Suitable for both new builds and refurbishment.
Beskrivelse
The Licatatherm mineral wool EWI system has increased strength and crack resistance, due to the glass fibre mesh. Breathable and fully fire compliant, it’s suitable for both new builds and refurbishment. Choose from brick slips or a coloured render for the decorative finish. EWI systems help improve the appearance and thermal efficiency of properties, reducing overall energy consumption.
Features and benefits:
- Suitable for various substrates, Frames, Boards, Masonry.
- Over 700 colour options.
- Weather resistant.
- Energy carbon saving.
- Breathable.
- Protects against algae and mould.
- Fully fire compliant.
Durability:
- This system has an assessed anticipated lifespan in excess of thirty years.
Design considerations:
- Should the proposed project incorporate any unique design elements or curved elevations, please contact the manufacturer for recommendations or assistance.
INSTALLATION
Installer:
The system manufacturer, or a contractor approved by the system manufacturer. Installation shall be made strictly in accordance with Licata Building Systems Ltd instructions. Reference should be made to the project specification, method statement, drawings and all other relevant literature. Consult with LBS Ltd for latest literature and technical bulletins.
FINISHES
Primer:
- Apply the Isolante LG Primer with a roller or brush to the dry base coat in an even pattern. Where possible always use the colour Primer to match the specified Topcoat finish. Allow to dry for a minimum of 12 hours.
Licata Silicone Render:
- Thin coat is a ready mixed top coat for external use, highly breathable, high water resistance and excellent mechanical strength. Silicone render provides a high resistance to algae, fungi, mould and to atmospheric agents. The careful choice of acrylic binders and silicone, ensures good durability and a gloss finish with pearlescent effect to the water drops.
- Licata Silicone Render is suitable as a decorative finish in all work requiring high permeability to water vapour.
Siloxan Color:
A coating made with water-dispersed siloxane binder paste, ready for use and which can be pigmented. Siloxan Color is specifically designed for work on new or existing facades, as well as for the decorative phase of reinforced skim coating, and in LicataTherm external solid insulation. Owing to its formula, Siloxan Color provides complete protection for the facade against rain and atmospheric agents. The special additives contained in the formula guarantees excellent protection against algal and mould growth.
Brick slips:
The brick slip systems can be used across a range of different applications and substrates. Suitable for internal and external application on both new build or refurbishment projects. The brick slip systems are durable and weather-resistant with a 10-year guarantee if installed by a Licata approved applicator. A choice of mineral or clay brick slips are available.
- Mineral Brick Slips: provide the traditional appearance of a brick finished building but with technology of a lightweight acrylic or mineral brick slip finish. Mineral Brick Slips are a suitable finish for external wall insulation systems used on new build or renovation of old buildings. It can also be used with timber-metal frame or modular where speed and weight are important in designs but traditional brick slips would not be recommended.
- Licata Clay Slips: are a versatile thin brick cladding that simulates the look of traditional clay brickwork whilst providing greater insulation and more flexibility of style and application.
Generell informasjon
Farge | Clear Beige Black Blue Brown ProdusentveiledningRender finishes are available in over 700 colours and shades and also most RAL and NCS colours. |
Overflatebehandling | Smooth Natural |
Materiale | Mineral wool Timber Veiledning for spesifikasjonsvalg: Frame. Brick Clay Acrylic |
Form | Rectangle |
Lengde | Bespoke |
Bredde | Bespoke |
Høyde | Bespoke |
Garantibeskrivelse | Ten year 25 year ProdusentveiledningIf installed by an approved Licata installer, both 10-year and 25-year material warranties are available, depending on the project requirements and detailing. 25-year warranties can be under written to meet the requirements of EWI energy saving grants. Licata provides guarantees for material defects on all Licata approved systems that are installed by their accredited contractors. These guarantees are valid for the initial ten years of the system's life and in addition they can also offer 25 year extended warranties for projects supported by government schemes, extended warranties are available through third-party insurance partners such as SWIGA, subject to terms and conditions. For more details on these guarantees, please consult the manufacturer. |
Uniclass | |
CAWS | M21/20 Utvendige varmeisolasjonssystemer for vegger M21/210 Rendered external wall insulation systems |
Product range |
Spesifikasjonsdata - Utvendige varmeisolasjonssystemer for vegger
Klassifiseringsdata | |
System performance | Thermal performance |
Preparation | Surfaces must be sound, free from loose material and clean. Veiledning for spesifikasjonsvalg: Where an adhesive system is used, the surfaces must be sound, free from loose material and clean. Where additional mechanical fixings are to be used, the substrate must be capable of sustaining the design loads. Existing substrates that show visible signs of algae and mold will require treating with an approved proprietary biocidal wash prior to any render works. |
Support rails and brackets | |
Fixing method | |
Material | Timber frame. Steel frame. |
Boards | |
Material | A1 Fibre cement board. Veiledning for spesifikasjonsvalg: For steel and timber framed substrates. |
Fixings | Self-drilling screws. Veiledning fra produsentAll fixings are based upon Etag and BBA certification and the manufacturers products are designed and tested to fully comply with current required certifications and testing. |
Insulation | |
Material | MW Dual Density 036. Veiledning for spesifikasjonsvalg: Dual density mineral wool slabs available in sizes up to 1200 x 600 mm and in a range of thicknesses from 40–240 mm, with nominal densities of 160/100 kg/m³ (outer/inner layer), a minimum compressive strength of 10 kPa and a tensile resistance perpendicular to the faces of 10 kPa. Slabs are manufactured to comply with BS EN 13162:2012. |
Adhesive | Raso Top 800 Grey. Veiledning for spesifikasjonsvalg: Cement-based powder requiring the addition of 5.25 litres of clean water per 25 kg bag. Applied to a thickness of 5 mm. Raso Top 800 White. Veiledning for spesifikasjonsvalg: Cement-based elastic fibre-reinforced powder requiring the addition of 6 litres of clean water per 25 kg bag. Applied to a thickness of 5 mm. |
Additional mechanical fixings | EJOT Dabo® SW8R 4.8 screws, EJOT® SBH T 65/25 washers. Veiledning fra produsentDesigned and tested to meet the current wind load and suction requirements, the system is adhesively fixed with supplementary fixings in accordance with BS EN 1991-1-4:2005. Special consideration should be given to locations with high wind-load pressure coefficients, as additional fixings may be necessary. It is recommended that a load factor of 1.5 is used to determine the ultimate wind load, in accordance with BS EN 1990:2002. |
Fire barriers and stops | |
Material | 1000 x 200 mm rock fibre panels. Fire breaks. |
Fixings | Ejot H1 ECO. |
Beads and trims | Licata meshed corner beads. Licata PVC stop beads. |
Movement joints | |
Form with | PVC movement bead. |
Sealant | Compression bands. |
Accessories | Backing strips. Joint filler. |
Render carrier or reinforcement | |
Material | LicataTherm Ret01-1160, glass fibre mesh. Veiledning for spesifikasjonsvalg: 1 m wide mesh (3.5 x 4.5 mm grid size) of multi-strength glass fibre, with a polymer coating and nominal weight of 145 g/m². LicataTherm Tolantext 41-112, glass fibre mesh. Veiledning for spesifikasjonsvalg: 1 m wide mesh (3.5 x 4.7 mm grid size) of multi-strength glass fibre, with a polymer coating and nominal weight of 150 g/m². |
Mesh size | As Material. |
Fixings | Ejot H1 ECO. |
Render | |
Application | Primer coat. |
Material | Isolante LG Primer. Veiledning for spesifikasjonsvalg: Ready-to-use pigmented universal primer, based on acrylic copolymers. |
Decorative finish | Acrylic render. Silicone render, particle size ______. Veiledning for spesifikasjonsvalg: Ready to use paste, silicone-based finishing coat with thickness regulated by the particle size. Available in 0.7, 1, 1.2, 1.5 and 2.0 mm particle sizes; insert requirements. Silicate render. Acrylic brick slips. Veiledning for spesifikasjonsvalg: Provide the traditional appearance of a brick finished building but with technology of a lightweight acrylic or mineral brick slip finish. Acrylic brick slips are a suitable finish for external wall insulation systems available in 3 mm size. Clay brick slips, 10 mm. Veiledning for spesifikasjonsvalg: Licata Clay Brick Slips are a versatile thin brick cladding that simulates the look of traditional clay brickwork whilst providing greater insulation and more flexibility of style and application. Clay brick slips, 15 mm. Clay brick slips, 20 mm. |
Colour | Veiledning for spesifikasjonsvalg: Consult manufacturer and insert requirements, depending on Decorative finish specified.
|
System accessories | APU with mesh 9 mm. Compression band. Veiledning for spesifikasjonsvalg: Where required. Licata PVC stop beads. Licata meshed corner beads. |
Execution | Preparation work to existing substrate Installing insulation boards Installing fire barriers and fire-stopping Installing movement joints Fixing beads and trims Installing render carrier or reinforcement Applying render Applied decorative finish – dragged texture |
System completion | Documentation for insulated render systems. |
Samples required | Submit samples of Licata Topcoat finishes for approval. Keep approved samples on-site for the duration of the contract for inspection and comparison purposes. |
Bærekraftsdata
Inneholder Red List-materialer | No |
Opprinnelsesland for materiale | Italy |
Produksjonsland for produktet | Italy Veiledning for spesifikasjonsvalg: Render materials. Insulation boards: UK and Germany. |
Materiale | Mineral wool Timber Veiledning for spesifikasjonsvalg: Frame. Brick Clay Acrylic Silicone |
Resirkulerbarhet | 100% |
Dokumentasjon
Licata Render Systems Brochure
Licata Acrylic Brick Slips Brochure
Lignende produkter fra Licata Building Systems Ltd
LicataTherm EcoPure Lime-based External Wall Insulation System
LicataTherm Masonry EPS Acrylic Render External Wall Insulation System - EWI with Kingspan K5 Insulation
LicataTherm Masonry EPS Mineral Render External Wall Insulation System
LicataTherm Masonry EPS Silicone Render External Wall Insulation System - External Wall Insulation System
LicataTherm Steel Frame Mineral Wool Clay Brick Slips A1 Rated External Wall Insulation System - External Wall Insulation System onto SFS
LicataTherm Steel Frame Mineral Wool Mineral Brick Slips External Wall Insulation System - External Wall Insulation System onto SFS
LicataTherm Steel Frame Mineral Wool Silicone Render External Wall Insulation System - External wall insulation system onto SFS