Sammenlign

General Purpose Wall Ties - Type 3 - Traditional Double Triangle

Name: General Purpose Wall Ties - Type 3 - Traditional Double Triangle
Brand: Vista Engineering Ltd
SKU: cdU6RgtVee9FXwXA2mr4Nc

Verifisert av produsent for 6 måneder siden

Vista Engineering Ltd

Traditional double triangle tie for securing two leaves of a cavity wall to each other, allowing them to act as one structurally.

Gå til:

+44 (0)1663 736700 Nettside

Applikasjon

Suitable for buildings with a maximum height of 15 m and cavity widths from 0–150 mm.
Multidrip feature to prevent moisture travelling across the cavity.
Design means the tie can be installed either way up.

Beskrivelse

Traditional double triangle tie for securing two leaves of a cavity wall to each other, allowing them to act as one structurally.

Features and benefits:

Incorporates a change of shape to discourage moisture moving across the tie.
Available with a dedicated clip to secure insulation (usually in sheet form) within the cavity.
Suitable for buildings with a maximum height of 15 m and cavity widths from 0–150 mm.
Design means the tie can be installed either way up.
Tested as Type B (sound).
Tested to BS EN 845-1.
UKCA certified.

Type 2 versions also available (shorter; specified separately).

Generell informasjon

Farge	Silver
Materiale	Stainless steel Veiledning for spesifikasjonsvalg: Grade 304.
Lengde	275 mm 300 mm

Uniclass	Pr_20_85_84_19 Murankere for hulveggerPrimær
CAWS	F30/25 Cavity wall ties used with partial fill insulation F30/215 Cavity wall ties used with partial fill insulation F30/220 Wall ties F30/26 Wall ties F30/24 Hulveggbindere F30/214 Hulveggbindere

SKU Code	V26

Spesifikasjonsdata - Hulveggbindere

Klassifiseringsdata
Standard	To BS EN 845-1.
Tie type	PD 6697 Type 3 (Masonry – basic). Veiledning for spesifikasjonsvalg: Traditional double triangle, general-purpose wall tie used in small commercial buildings and domestic properties. Suitable for buildings with a maximum height of 15 m and cavity widths from 0–150 mm. Multidrip feature to prevent moisture travelling across the cavity. Design means the tie can be installed either way up.
Material	Grade 304 stainless steel.
Length	275 mm. Veiledning for spesifikasjonsvalg: Cavity: 126–150 mm. 300 mm. Veiledning for spesifikasjonsvalg: Cavity: 151–175 mm. Veiledning fra produsent Shorter versions can be specified (separately) under Type 2 - General Purpose Wall Ties. Supplied in boxes of 250.
End types	Manufacturer's standard. Veiledning for spesifikasjonsvalg: Consult manufacturer for details.
Design embedment length (minimum)	Manufacturer's standard. Veiledning for spesifikasjonsvalg: Consult manufacturer for details.
Movement	Manufacturer's standard.
Additional requirements	-
Mortar joint thickness (minimum)	Manufacturer's standard. Veiledning for spesifikasjonsvalg: Consult manufacturer for details.
Resistance to water crossing cavity	Resistant (multidrip feature).
Slope tolerance	Manufacturer's standard. Veiledning for spesifikasjonsvalg: Consult manufacturer for details.
Compressive load capacity	Manufacturer's standard. Veiledning for spesifikasjonsvalg: Consult manufacturer for details.
Tensile load capacity	Manufacturer's standard. Veiledning for spesifikasjonsvalg: Consult manufacturer for details.
Dynamic stiffness	Type B.
Tie-mounted insulation retaining clips	ECO clips. Veiledning for spesifikasjonsvalg: Universal 80 mm-diameter insulation clip made using less plastic for reduced environmental impact. Supplied in bags of 250 or 50. Not required.
Third party accreditation	UKCA marked.