AquaeSEAL
Verifisert av produsent for 1 måned siden
Synthetic polymer tanking membrane.
Applikasjon
- Wet room installation, acting as a waterproof ‘tanking’ membrane, for floor and walls.
- All shower installations, with a tile finish to the walls.
- Bathrooms where the floor or wall are at a higher risk of water ingress due to splashing.
- Refurbishments and new build projects.
Beskrivelse
AquaeSEAL RP Waterproof Sealant is a semi-solid, ‘ready to use’, and synthetic polymer tanking membrane which is applied by brush, roller or trowel. Tiles and tile adhesive are fixed directly to the surface of this fast drying, resilient and highly elastic waterproofing material. Use AquaeSEAL JST tapes when bridging joints, to create stable and secure waterproof structures.
Features and benefits:
An elastic, ready to use membrane, used to protect dry building substrates under ceramic tiles, with the following characteristics:
- Single component, solvent-free and waterproof.
- Highly elastic and flexible.
- Crack-bridging and age-resistant.
- Permeable to diffusion.
- Dries a different colour.
- Suitable for humidity load classes 0, A01 and A02 and officially approved for load class A1.
- AquaeSEAL RP prevents damage in normal loaded wet areas and wet loaded walls and floor areas, functioning as a membrane for laying ceramic tiles on moisture sensitive substrates.
Generell informasjon
Materiale | Polymer Veiledning for spesifikasjonsvalg: Polymer with ' semi-solid, ‘ready to use’, and synthetic polymer tanking membrane. |
Form | Formless |
Size | Veiledning for spesifikasjonsvalg: Supplied in standard PolyTubs, 7 kg. |
Uniclass | |
CAWS | J30/110 Cold-applied tanking M40/10 Natural stone covering M40/110 Flislegging M40/115 Natural stone covering M40/12 Mosaic M40/120 Mosaic M40/27 Intermediate substrate M40/470 Intermediate substrate M40/5 Flislegging N13/375 Shower units N13/377 Wet room showers N13/40 Shower units |
Spesifikasjonsdata - Harpikser for væsketetting
Klassifiseringsdata | |
Composition | Synthetic polymer, single component, solvent-free. |
Coverage | 0.74 m²/kg. Veiledning for spesifikasjonsvalg: Single coat maximum of 9.4 m² approximately. Two coats are recommended. |
Low temperature stability | 6°C. |
Upper temperature stability | 70°C. |
Container capacity | 7 kg. Veiledning for spesifikasjonsvalg: Supplied in standard PolyTubs, 7 kg. |