Sammenlign

Siniat EI120 Shaftwall System – CH90B-19FC#315F-25G

Name: Siniat EI120 Shaftwall System – CH90B-19FC#315F-25G
Brand: Siniat
SKU: 9Tv9r5v13fwsukqXJdosdg

Verifisert av produsent for 3 måneder siden

Siniat

Produktsertifiseringer:

EN 13501-2
Sertifikattype
CCPI System
Sertifikattype
EPD
Sertifikattype

Insulated fire protection system for protection of shafts and voids in multi-storey buildings with a rapid installation system preventing continuous routes for the spread of fire.

Gå til:

+44 (0)1275 377773 Nettside

Applikasjon

Protection of shafts and voids in multi-storey buildings with a rapid installation system preventing continuous routes for the spread of fire.

Beskrivelse

EI120 Shaftwall System with 25 mm glass mineral wool insulation, classified to EN 13501-2:2016.

Generell informasjon

Farge	Pink
Overflatebehandling	Smooth
Materiale	Plasterboard Steel Metal Gypsum Glass mineral wool
Bredde	Bespoke
Høyde	Bespoke
Garantibeskrivelse	Lifetime Veiledning for spesifikasjonsvalg: Etex Building Performance Limited offers both a comprehensive Lifetime System Warranty (excl. Aquaboard™ and Weather Defence) and External Board Warranty (Incl. Aquaboard™ - 10 Years and Weather Defence - 12 Years). For full details see the full Warranty and Proprietary Systems Policy at www.siniat.co.uk/knowledge-centre/. Etex Building Performance Limited warrants to the purchaser that the Siniat drywall systems as originally designed, built and unaltered will perform to the original laboratory performance parameters as set out in the Siniat Drywall Manual and other relevant literature as published by Siniat. The System must be constructed solely with the proprietary products and components as supplied by Siniat. The System must be installed by a professional installer in accordance with the Siniat Drywall Manual, the specification documents issued by Siniat, CAD drawings, advice and all relevant and applicable construction standards and regulations.

Uniclass	Ss_25_10_30_35 Skilleveggsystemer av gipsplaterPrimær
CAWS	K10/125 Metal stud partition system K10/30 Metal stud

Product range	Shaftwall / Siniat Shaftwall

Spesifikasjonsdata - Skilleveggsystemer av gipsplater

Systemytelse
Sound insulation, Rw (minimum) to BS EN ISO 10140-2 or BS EN ISO 140-3	51 Rw (dB).
Fire resistance to BS EN 1364-1 and classification to BS EN 13501-2	EI 120.
Duty rating to BS 5234-2	Severe duty (SD).
Maximum height - cold state	5300 mm.
Maximum height - fire state	4800 mm.
Thickness	135 mm.

Klassifiseringsdata
System performance	All Siniat systems should be constructed to BS 8000-8:2023 'The Standard for Workmanship on construction sites - Design and installation of dry lining systems. Code of practice.'
System manufacturer	Siniat.
Framing	90 mm Siniat CH Studs CHS1990/B at 600 mm centres. 90 mm Siniat E Studs ES1990/B. Head track: 92 mm Siniat U Track Deep Flange UDT92/P. Base track: 92 mm Siniat J Track JT92/B. Veiledning fra produsent All Siniat CH-Studs and E-Studs to be a minimum 25 mm shorter than floor to ceiling height or by deflection amount, whichever is greater.
Insulation	Glass mineral wool. Veiledning for spesifikasjonsvalg: 25 mm thick.
Linings	Face A Plasterboard Linings - Inner Layer: 19 mm Siniat Fire Core Board. Face B Plasterboard Linings - Inner Layer: 15 mm Siniat Fire Board. Face B Plasterboard Linings - Middle Layer: 15 mm Siniat Fire Board. Face B Plasterboard Linings - Outer Layer: 15 mm Siniat Fire Board. Veiledning fra produsent Shaft side lining: 19 mm Siniat Fire Core Board. Corridor/room side lining: 15 mm Siniat Fire Board.
Fasteners	Face B Inner Layer Fixing: 25 mm Siniat Self Tapping Screws at 600 mm centres. Middle Layer Fixing: 42 mm Siniat Self Tapping Screws at 600 mm centres. Outer Layer Fixing: 65 mm Siniat Self Tapping Screws at 300 mm centres.
Joint treatment	Decorative. Veiledning for spesifikasjonsvalg: Outer layer room side boards to be taped and jointed using appropriate Siniat compounds and tape. Non-decorative. Veiledning for spesifikasjonsvalg: Outer layer room side boards to be taped and jointed using appropriate Siniat compounds and tape to at least first stage (bedding).
Finish	Decorative. Non-decorative.
System accessories	Siniat Flat Strap FS50/Rx. Veiledning for spesifikasjonsvalg: For use where partition height exceeds board height; to be fixed behind all horizontal joints to provide substrate for board fixing.
Sealing (joints and penetrations)	Siniat Intumescent Acoustic Sealant. Veiledning for spesifikasjonsvalg: Apply continuous beads of Siniat Intumescent Acoustic Sealant around the perimeter of the framing or to the edge of outer layers of board, ensuring that all air-paths are sealed. All penetrations should use supporting constructions detailed in the Siniat Drywall Manual unless superseded by specific test information. For combined, warrantied performance specify FSi fire-stopping products. For cPVC pipe sealing, use FSi PYROPRO® HPE Sealant in place of Siniat Intumescent Acoustic Sealant.
Standards	All products are CE marked and UKCA marked in accordance with Construction Products Regulation where relevant standards or European Technical Approvals exist. All boards to conform to BS EN 520 or alternative standard where appropriate. Metal framing components are hot-dipped galvanized steel to BS EN 10346. Metal sections rolled to BS EN 10162. Metal studs, tracks and accessories conform to BS EN 14195 where required. Drywall screws conform to BS EN 14566.
Sealer coat	Siniat Drywall Sealer.
Cavity size	70 mm.
System code	CH90B-19FC#315F-25G

Bærekraftsdata

Opprinnelsesland for materiale	Spain Veiledning for spesifikasjonsvalg: Applies to the bulk material (gypsum) only. Other components are from other countries. Consult manufacturer for details.
Produksjonsland for produktet	United Kingdom Veiledning fra produsent UK applies to the majority of manufacture but a small percentage of finished items are imported. Contact manufacturer for details.
Materiale	Plasterboard Steel Metal Gypsum Glass mineral wool
Carbon dioxide equivalent
Karbondioksidekvivalent, som definert i BS EN 15804 Sertifisert
Fase Normalisert enhet (kg CO₂ eq/kg) Deklarert enhet (kg CO₂ eq/unit) Fase:A1–A3 (Produksjonsfase) Normalisert enhet : Deklarert enhet :- Veiledning fra produsent Latest EPD information available from: https://www.siniat.co.uk/en-gb/documentation/
Resirkulerbarhet	Gypsum and metal components can be recycled depending on the segregation of all materials.
Resirkulert innhold	- Veiledning fra produsent Gypsum average 33.5% and metal average 17%.