Sentry Stainless Steel Access Module
Verifisert av produsent for 5 måneder siden
A fully pre-fabricated stainless steel access panel system.
Applikasjon
- Toilet cubicles with a WC toilet pan.
- Airports.
- Commercial spaces.
- Football grounds.
- High quality offices.
- Hotels.
- Leisure areas/ clubs.
- Schools.
- Theatres.
Beskrivelse
Fully pre-fabricated, unique, hinged access panel module up to 3000 mm high and in a maximum width of 1000 mm, manufactured in the UK using Aluminium Alloy 6063T6. Overall depth from the rear of the framework to front face of panel is 82 mm. The system offers corrosion resistance to moisture, but is not designed to prevent water penetration. The system is suitable for use inside toilet cubicles with a WC toilet pan, to house urinals or wash-hand basins, or as wall lining. It can be used on a back wall or in a back-to-back layout.
Features and benefits:
- Factory-prefabricated access panel system.
- Full aluminium framework.
- Hinged access doors.
- Doors secured by catches.
Generell informasjon
Overflatebehandling | Brushed |
Materiale | Stainless steel |
Form | Other |
Lengde | Bespoke |
Bredde | Bespoke |
Høyde | Bespoke |
Garantibeskrivelse | Ten year |
Uniclass | |
CAWS | K32/150 Duct/ wall linings – panels and proprietary frames K32/15 Duct/ wall lining panels |
Spesifikasjonsdata - Bekledningssystemer for kanaler og veggpaneler
Klassifiseringsdata | |
Fasteners | Access panels are factory-fitted to framework, using adjustable zinc alloy die-cast hinges and fastened using zinc alloy die-cast locating catches. Panel accessed using supplied injection-moulded key. |
Supporting frame | |
Duct panels | Full aluminium frame using Aluminium Alloy 6063T6, factory-assembled using extruded vertical posts and horizontal cross-rails. Veiledning fra produsentFull aluminium frame using Aluminium Alloy 6063T6, factory-assembled using extruded vertical posts and horizontal cross-rails, manufactured to bespoke width and height and supported by 12 mm diameter zinc-plated carbon steel adjustable feet. Frame locates into floor and ceiling channel and is braced to the back wall with aluminium angle to a specified distance (standard is 300 mm to the face of the panels). This framework fully supports the module, and no other elements are required to enable the fitting of the system. |
Access panel | Not required. Particleboard. Medium density fibreboard. Veiledning fra produsent17 mm finished thickness consisting of a 15 mm moisture-resistant chipboard/ MDF core, sourced from sustainable forests. Panels are initially faced with backing laminate, before being edged, top and bottom, in a matching high pressure laminate. Subsequently, they are faced with stainless steel sheet, folded around vertical edges. The standard configuration allows for three panels per module, although this can be varied to suit a particular application. Cut-outs for the sanitaryware are undertaken on site to allow for flexibility/ tolerance. Additional cut-outs for other accessories are possible. |
Infill panels | High Pressure Laminate. Veiledning for spesifikasjonsvalg: Insert requirements from manufacturer's selection. Veiledning fra produsentThe infills form an integral part of the framework, consisting of vertical infills, a head infill and skirting, creating required shadow gaps/ clearances to the vertical edge of the panels and at the floor and ceiling. 17 mm finished thickness consisting of 15 mm moisture-resistant MDF core, sourced from sustainable forests, and faced with matching high pressure laminate with balancing backing laminate. Alternatively, WBP plywood can be supplied as skirting to accept finishes by others, such as tiling/ vinyl. When fitted prior to the finished ceiling, the head infill can sit above the level of the ceiling, with the ceiling then subsequently fitted to the face of the head infill. Alternatively, if the ceiling is fitted first, the head infill can be scribed to the underside of the ceiling. The system has standard shadow gaps of 16 mm to the centre and 25 mm to side walls. These can be reduced to suit a particular requirement by using alternative hardware. |
Colour/ Finish: | Veiledning fra produsentInsert requirements from manufacturer's selection. |
Størrelse: | Veiledning fra produsentUp to 3000 mm high and 1000 mm wide. |
Product Reference | Sentry Stainless Steel Access Module |
Bærekraftsdata
Opprinnelsesland for materiale | United Kingdom |
Produksjonsland for produktet | United Kingdom |
Materiale | Stainless steel |
Dokumentasjon
Thrislington Product Summary - Sentry Ducting
Lignende produkter fra Thrislington Cubicles
Hung Compact Grade Laminate Access Panel
Hung Laminate Access Panel
Sentry Aluminium Access Module
Sentry Compact Grade Laminate Access Module
Sentry Glass Access Module
Sentry Laminate Access Module
Sentry Veneer Access Module