RIW Sheetseal 226 - Self-Adhesive Waterproof Membrane.
Verifisert av produsent for 2 måneder siden
BBA Agrément Certificate
Sertifikattype
Sheetseal 226 is a cold applied self-adhesive waterproof membrane, with a high density polyethylene film, coated with a bitumen/rubber self adhesive layer and a removable reinforced silicone paper.
Applikasjon
- Basements and sub-structures.
- Ground floors.
- Reservoirs.
- Retaining walls.
Beskrivelse
A cold applied, high density polyethylene film coated with a bitumen/ rubber self-adhesive layer with a removable reinforced silicone release paper. The product is typically used for waterproofing retaining walls, floors, reservoir roofs, etc. where large unobstructed areas are to be treated. The membrane must always be covered.
Features and benefits:
- Water and water vapour barrier.
- Factory controlled thickness.
- Elastic and flexible.
- Damage easily repaired.
- No drying time.
- Sulphate resistant.
- Selvedge strip to improve lap sealing.
Joint laps:
Side and end laps minimum 50 mm and 100 mm respectively are recommended.
Generell informasjon
Farge | Black |
Overflatebehandling | Smooth |
Materiale | Bitumen High density polyethylene (HDPE) |
Form | Rectangle Other |
Lengde | 19050 mm |
Bredde | 1050 mm |
Garantibeskrivelse | Ten year ProdusentveiledningRIW Limited’s waterproofing products will, subject to normal service conditions, provide an effective barrier to the transmission of liquid water and water vapour for the life of the building in which they are incorporated., The products must be installed in accordance with RIW written instructions, and following installation must not be subjected to any damage or long-term UV exposure. |
Uniclass | |
CAWS | J40/190 Self-adhesive bitumen damp proofing/ tanking J40/40 Self-adhesive bitumen membranes |
Spesifikasjonsdata - Bitumenplater
Klassifiseringsdata | |
Third-party certification | British Board of Agrément (BBA) Certificate. |
Material | |
Bitumen modification | Adhesive-modified bitumen. |
Thickness (minimum) | 1.5 mm. |
Product Reference | RIW Sheetseal 226 |
Primer | Not required. RIW Sheetseal Primer. Veiledning for spesifikasjonsvalg: Used on all vertical or inclined substrates. RIW Sheetseal primer is a bitumen solution. |
Water vapour transmission | < 0.3 g/m²/24hr. |
Bærekraftsdata
Materiale | Bitumen High density polyethylene (HDPE) |
BIM-objekter
Dette BIM-objektet er forfattet for å oppfylle kravene i
Finn ut mer om
| Plattform | Kompatibel | Versjon |
|---|---|---|
 Revit | Revit 2016 | 2 |
 IFC | IFC2X3 | 1 |
Produktsertifiseringer
Lignende produkter fra RIW
RIW Sheetseal GR - Gas Retardant Membrane