Sammenlign

Koster Polysil TG 500

Name: Koster Polysil TG 500
Brand: Delta Membrane Systems Ltd
SKU: 28yXjpUX9LZ1fDpDRxncCA

Verifisert av produsent for 1 døgn siden

Penetrating primer and liquid hardener.

Gå til:

Applikasjon

Primer underneath subsequent layers of polymer-modified bitumen thick film sealants such as Köster Deuxan® 2C, Köster Bikuthan® 2C, etc.
Can be used as a pre-treatment or primer of new concrete to prevent free-lime egress.
Compatible with mortars, plasters, cementitious slurries and concrete (but not gypsum).
Can be used to harden sealing slurries.

Penetrating primer and liquid hardener.

Features and benefits:

A thin fluid product based on a polymer and silicate combination which can be used as a deep penetrating primer or as a liquid hardener.
Strengthens and protects mineral substrates and to reduce their absorbency, even on problematic building materials such as sandstone.
Decreases salt efflorescence and free-lime in new developments and increases the resistance of mineral substrates to freezing and thawing.
Increases chemical and mechanical resistance of mineral building materials.
Has strengthening and hydrophobing properties.

Farge	Clear
Garantibeskrivelse	Ten year

Uniclass	Pr_35_31_66_78 Glideskikt bituminøse emulsjonsmaling grunningerPrimær
CAWS	C42/350 Impregnations for protecting concrete J10/130 Proprietary crystallization active mortar J30/10 Cold-applied damp-proofing J30/110 Cold-applied tanking J30/130 Cold-applied damp-proofing M60/18 Special coating M60/195 Special coating

SKU Code	DMS 170

Klassifiseringsdata
Consumption (per layer applied)	- Veiledning fra produsent Deep penetrating primer: 100–130 g/m² – double this amount is possible on strongly absorbent substrates. As hardener of slurries: 200–250 g/m². Under bituminous thick film sealants: 150 g/m² (approximately) – double this amount is possible on strongly absorbent substrates. Pre-treatment or primer of new concrete: 130 g/m² – by brush or spray.
Application temperature	5°C. Veiledning for spesifikasjonsvalg: Minimum.
Recoating time	- Veiledning fra produsent Minimum. Acrylate and silicate paints: 24 hours. Cementitious building materials: 30 minutes.