NBS Source
Jeg er en produsent
NBS Source

Applikasjon

Designed for applications requiring dependable security and reliable operational performance, the trackless bi-folding speed gate is specified for use across utilities and distribution environments, as well as commercial, residential, and government sites including banks, embassies, warehouses, airports, schools, and universities, where automated bi-folding speed gates form part of the perimeter access control strategy.

Beskrivelse

The trackless bi-folding speed gate features an integrated drive mechanism that controls the smooth, rapid opening and closing of the bi-folding gate. The system synchronises both gate leaves to deliver controlled, reliable operation without the need for a bottom or top track. This trackless design eliminates height restrictions and removes the requirement for large road-mounted tracks, providing an efficient access control solution.

Features and benefits:

  • Heavy duty hydraulic ram with PLC controlled slowdown in both opening and closing movement.
  • Hydraulic automation, low maintenance with minimal moving parts.
  • Smooth and quiet operation.
  • Trackless design, no height restrictions and lower maintenance.
  • Operates in approximately 10-15 seconds (through 90°).
  • No additional locking device required.
  • Powder-coated finish.
  • Multiple infill options for security and design.

Generell informasjon

Farge

Other

Produsentveiledning

Products can be powder-coated to any RAL or BS reference.

Overflatebehandling

Powder-coated

Produsentveiledning

Standard finish for mild steel fabrication:

  • Pre-treatment: blast cleaned SA2.5 - primer: Interpon PZ790 (or equivalent) - topcoat: Interpon D1036 powder-coat (or equivalent).
  • Minimum application: 80 micron.
  • Suitability: Environments up to and including C4 – ‘Industrial areas and coastal areas with moderate salinity’.
  • Design Life Expectancy: 15 years - For decorative appearance is given up to C3 12 years. Over that, life expectancy relates to corrosion protection only.
  • For C5 classification environments or enhanced protection, please contact us to discuss metallisation (hot zinc) or hot dip galvanizing alternatives. 

Materiale

Steel

Form

Rectangle

Square

Bredde

Bespoke

Produsentveiledning

Guidance for specification option:

  • Maximum width 5000mm applies to all single leaf variants.
  • Maximum width 10,000mm applies to all double leaf variants.

Note: Maximum width may be subject to limitation for some infill options due to weight, combination with height, or wind loadings. Please contact manufacturer for further guidance.

Høyde

Bespoke

Produsentveiledning

Typically, the height of the gate is 2400 mm or 3000 mm but can be designed to bespoke requirements with the manufacturer's in house design team.

Garanti­beskrivelse

One year

Uniclass

Pr_30_59_34_14 Karbonstål porterPrimær
Ss_25_32_35_30 Foldportsystemer

CAWS

Q50/20 Gate

Q50/15 Steel gate

Q40/560 Steel gates and posts

Q40/45 Proprietary gates

Q40/570 Proprietary gates and posts

Q50/130 Gate

Q50/120 Steel gate

Q41/190 Vehicle access point barriers

SKU Code

EAG50010

Spesifikasjonsdata - Karbonstål porter

Klassifiseringsdata

Product reference

Bi-folding Trackless Speed Gate.

Performance characteristics

-

Other

Complies with gate safety standard BS EN 13241-1.

Dimensions

-

Span

5000 mm.

Veiledning for spesifikasjonsvalg:

Single leaf - maximum.

10 000 mm.

Veiledning for spesifikasjonsvalg:

Double leaf - maximum.

Bespoke.

Veiledning for spesifikasjonsvalg:

Consult manufacturer and insert requirements.

Veiledning fra produsent

Consult manufacturer and insert requirements.

  • Maximum width 5000 mm applies to all single leaf variants.
  • Maximum width 10 000 mm applies to all double leaf variants.

Note: Maximum width may be subject to limitation for some infill options due to weight, combination with height, or wind loadings.

Height

2400 mm.
3000 mm.
Bespoke.

Veiledning for spesifikasjonsvalg:

Consult manufacturer and insert requirements.

Veiledning fra produsent

Typically, the height of the gate is 2400 mm or 3000 mm but can be designed to bespoke requirements with the manufacturer's in house design team.

Posts

Rectangular hollow section (RHS) 400 x 200 mm.

Gate leaves

Carbon steel.

Hardware

-

Hinges

Heavy duty included. Thrust and needle bearings with grease points.

Securing

Hydraulically locked in closed position.

Operating

Automatic – PLC controlled hydraulic system.

Finish as delivered

-

Worked finish

Blast cleaned, SA 2.5.

Applied finish

Interpon D1036 polyester powder-coated (PPC) (or equivalent).

Drive/ Control

100% duty cycle rated. 240 V 16 A supply.

Veiledning for spesifikasjonsvalg:

  • Anti-tail gate option.
  • Controls housed in the posts with secure steel door.
  • High quality heavy duty hinges incorporating sealed bearings for smooth and long life operation.
  • Hydraulic power pack.
  • Network capability for remote monitoring.
  • PLC design with frequency invertor speed control.

Access control

Automatic Number Plate Recognition (ANPR).
Card reader.
Digital keypad.
Radio control system.
Push button control.

Gate infill

Not required.
Acoustic solid.
Bar.
Bar and weldmesh.
Ornate.
Palisade.
Perforated steel sheet.
Weldmesh.
Special order.

Top protection

Not required.
Serrated edge (up to 100 mm).
Barbed tape.
Barbed wire (flat wrap).
Palisade struts.
Rotating spikes.

Format

Bi-folding.

Method of operation

Powered operation.

Veiledning for spesifikasjonsvalg:

  • Gate(s) operate in a quick but safe folding action.
  • Fully automatic – self closing after a pre-set duration, or following a vehicle passage (anti-tailgate).
  • Semi-automatic – requiring an activation to open or close the gate(s).
  • Dead man control – requiring a pushbutton to be continuously pressed and held during an open or close movement.
  • Traffic lights, if installed, indicate when the gates are closed, in operation, or open.

Colour

-

Veiledning fra produsent

Products can be powder-coated to any RAL or BS reference. Insert requirements.

Accessories

None.
Signage.
Traffic lights.
Light curtain.

Safety

Designed to DHF TS 013.
Induction loop amp.
CAT3 safety edges.
Dual height photocells.
Laser scanner (optional).
Light curtain (optional).
Traffic lights (recommended).

Electrical supply

Requires 240 V; 16 A.

Foundation layout

Manufacturer's standard.

Veiledning for spesifikasjonsvalg:

Consult manufacturer for details.

Bærekraftsdata

Inneholder Red List-materialer

No

Produksjonsland for produktet

United Kingdom

Plassering av produksjonsanlegg

Materiale

Steel

Forventet liv

15 year

Dokumentasjon

Trackless Bi-Folding Speed Gate Data Sheet

Trackless Bi-Folding Speed Gate Data Sheet

Lignende produkter fra Eagle Automation Systems Ltd

LPS1175 Security Rated Bi-Folding Trackless Speed Gate

LPS1175 Security Rated Bi-Folding Trackless Speed Gate

PAS68 HVM Impact Rated Bi-Folding Trackless Speed Gate

PAS68 HVM Impact Rated Bi-Folding Trackless Speed Gate

PAS68 Swing Gate, Challenger

PAS68 Swing Gate, Challenger

© 2026 Hubexo North UK Ltd. Alle rettigheter forbeholdt.