BaseDrain & FloorDrain - Drainage System - Newton CDM - Drainage System

Newton CDM BaseDrain and CDM FloorDrain is the drainage system used most commonly within the Newton CDM System – A range of products that collectively receive water ingressing at weaknesses within the structure and then discharge the collected water to a Newton Basement Pumping System or safe drainage.

The 18 mm holes drilled in both sides of the profile, as well as to the top surface, allows water from beneath the CDM Fibran XPS-500C insulation boards and within the spacer zone to enter the drainage channels more easily.

• CDM BaseDrain: Drainage conduit for the perimeter of the area to be waterproofed. Is situated at the base of the wall membrane.
• CDM FloorDrain: Drainage Conduit for collection of water at construction joint to the floor and to replace Basedrain at door thresholds. FloorDrain is also used to connect the perimeter BaseDrain to the sump.
• CDM BaseDrain Corner: Formed 90° corner.
• CDM BaseDrain T-Piece: Formed T for a 90° connection to FloorDrain from BaseDrain and for draining through engineering brick as an alternative to open perpendicular joints
• Jetting & access point: for inspection and maintenance access to the drainage system.
• CDM Basedrain Connectors: For connecting BaseDrain pieces.