Sammenlign

ARDEX AF 195 LVT Adhesive for areas of High Temperature

Name: ARDEX AF 195 LVT Adhesive for areas of High Temperature
Brand: Ardex UK Ltd
SKU: uazhHvQVMm9eDFwT5dBDYR

Verifisert av produsent for 5 måneder siden

Ardex UK Ltd

Produktsertifiseringer:

GEV-EMICODE® EC1 PLUS
Sertifikattype
EPD
Sertifikattype

Fibre-reinforced luxury vinyl tile adhesive.

Gå til:

BOS

+44 (0)1440 714939 Nettside

Applikasjon

ARDEX AF 195 suitable for installing all types of vinyl floorcoverings, rubber (up to 4 mm in thickness) and linoleum in interior dry locations. This product is also suitable for use in areas of high solar gain such as conservatories and areas where floor to ceiling windows are installed.

Beskrivelse

ARDEX AF 195 is a fibre-reinforced, water-based, low odour, solvent free, acrylic, emulsion-based floorcovering adhesive with very good early and long term adhesive strength.

Features and benefits:

Enhanced bond strength.
Minimises lateral movement during installation.
Eliminates adhesive squeeze between tile and plank joints.
Improved indentation resistance.
Ready to receive luxury vinyl tile (LVT) floorcoverings in as little as 5 minutes.
High temperature resistance, suitable for use over underfloor heating systems and areas of high solar gain.
Solvent-free.
Covers up to 40 m².

Generell informasjon

Farge	Beige
Overflatebehandling	Other
Materiale	Acrylic Veiledning for spesifikasjonsvalg: Acrylic emulsion-based floorcovering adhesive.
Form	Formless
Lengde	Bespoke
Bredde	Bespoke
Høyde	Bespoke

Uniclass	Pr_20_31_02_03 Akryl- og metakrylatlimPrimær
CAWS	M50/20 Sheeting M50/110 Resilient floor tiling M50/150 Sheeting M50/10 Resilient floor tiling

Spesifikasjonsdata - Akryl- og metakrylatlim

Klassifiseringsdata
Form	One-component.
Open time (minimum)	Up to 35 minutes.
Colour	Beige.
Carrier	Solvent-free.
Total VOCs (maximum)	EC1 plus.
Working time	Up to 30 minutes. Veiledning for spesifikasjonsvalg: Depending on the absorbency of the subfloor and ambient conditions (20°C and 65% RH). Veiledning fra produsent The time in which the adhesive can receive the floorcovering, after the initial airing time.
Minimum storage temperature	+5°C to +30°C. Veiledning fra produsent Storage temperature range.
Temperature resistance	Classified as high temperature resistant up to +50°C.

Bærekraftsdata

Materiale	Acrylic Veiledning for spesifikasjonsvalg: Acrylic emulsion-based floorcovering adhesive.
Carbon dioxide equivalent
Karbondioksidekvivalent, som definert i BS EN 15804 Sertifisert
Fase Normalisert enhet (kg CO₂ eq/kg) Deklarert enhet (kg CO₂ eq/kg) Fase:A1–A3 (Produksjonsfase) Normalisert enhet :1.32 (kg CO₂ eq/kg) Deklarert enhet :1.32