NBS Source
Jeg er en produsent

Acrylic Gel - Curtain Injection Waterproofing System

Verifisert av produsent for 5 måneder siden

Koster Aquatecnic Ltd

Acrylic Gel injection system for waterproofing behind the structure whilst retaining the internal construction aesthetic. For example, in a Basement vault where the brickwork finish is to be retained.

Gå til:
+44 (0)1387 270252 Nettside

Applikasjon

This low viscosity, water based acrylic gel for curtain injection as well as area injection of masonry and concrete is characterized as having a very low starting viscosity. When injected under pressure into the structure, it is capable of penetrating into even the finest of pores where it can set and seal permanently.


The Environmentally friendly range of Koster Injection Gel materials can be used successfully in the following situations:

  • External/Positive Side Waterproofing of basements and below ground structures - from the Negative Side.
  • Waterproofing of underground voids.
  • Soil Stabilization and consolidation.
  • Waterproofing to bridges, tunnels and other similar structures.
  • Crack injection - to both dry and water bearing cracks.
  • Waterproofing of construction joints, injectable water bars and expansion joints.
  • Waterproofing to structures where Type A and Type C systems are not suitable.
  • Can be used to retro install a DPC or horizontal barrier.
  • European Drinking water approval.
  • Non-Toxic.

Beskrivelse

Exterior basement waterproofing from inside the building: in the case of renovation, it is not always possible to expose the exterior walls through excavation. For example, where the area to be excavated is built upon, traffic concerns impede the excavation, or the economic cost of excavation is deemed prohibitive.


In this case you would first think of an internal (negative side) basement waterproofing, but in some cases, such as in historical buildings or buildings with special architectural requirements, this may not be desirable.


In these cases a curtain injection with Koster Acrylic Gel is possible; where the resin is injected through the wall from the inside, to the outside.


The resin reacts with the water and moisture in the ground and binds it resulting in a waterproof, elastic mass. The injection is carried out with a special pump and through patented Koster Gel Injection packers. The injection material is dispersed on the exterior face of the wall and in a short time reacts to form the waterproofing layer.


An alternative method is injecting Koster Injection Gel into the building member itself. This so-called “area injection” is possible in porous or hollow building materials. In this case the Koster Injection Gel also reacts with any water present to form a waterproof, elastic mass.


System Components:

  • Pump: Koster Acrylic Gel Pump.
  • Packer: Koster Injection Gel Packer.
  • Waterproofing layer: Koster Injection Gel G4 or Koster Injection Gel S4.


For further information or design assistance, please contact the Koster Technical team at technical@kosteruk.com.

Generell informasjon

Farge

Clear

Cream

Overflatebehandling

Other

Materiale

Acrylic

Veiledning for spesifikasjonsvalg:

Water activated polyurethane gel.

Elastic

Resin

Liquid

Form

Formless

Lengde

Bespoke

Bredde

Bespoke

Høyde

Bespoke

Garanti­beskrivelse

Ten year

Uniclass

Pr_20_31_02_50 Injeksjonsharpiks for murverkPrimær

CAWS

J30/110 Cold-applied tanking

SKU Code

IN 290 021 Koster Injection Gel G4, IN 294 021 Koster Injection Gel S4

Product range

Crack Injection Systems
Civil Engineering Systems
External Basement Waterproofing Systems
Internal Basement Waterproofing Systems

Spesifikasjonsdata - Injeksjonsharpiks for murverk

Klassifiseringsdata

Composition

Acrylic Gel.

Waterproofing layer

Koster Injection Gel G4 and Koster Injection Gel S4.

Veiledning for spesifikasjonsvalg:

  • Solvent-free, water activated polyurethane gel.
  • Depending on the amount of water added, a highly elastic waterproof massive or respectively foam hydro gel is formed.
  • It does not promote corrosion and is designed and tested for use in drinking water environments.
  • It can be used for curtain and area injection as well as for posterior waterproofing of dilatation joints.

Bærekraftsdata

Inneholder Red List-materialer

No

Opprinnelsesland for materiale

Germany

Produksjonsland for produktet

Germany

Materiale

Acrylic

Veiledning for spesifikasjonsvalg:

Water activated polyurethane gel.

Elastic
Resin
Liquid

Resirkulerbarhet

No

Resirkulert innhold

0 %

Dokumentasjon

Koster Waterproofing Systems: The Green Pages of Waterproofing and Construction Chemicals

Koster Waterproofing Systems: The Green Pages of Waterproofing and Construction Chemicals

Koster External Basement Waterproofing Brochure

Koster External Basement Waterproofing Brochure

Koster Crack Repair and Crack Injection Systems

Koster Crack Repair and Crack Injection Systems

Koster Waterproofing Systems Company Brochure

Koster Waterproofing Systems Company Brochure

Koster Negative Side Waterproofing Brochure

Koster Negative Side Waterproofing Brochure

Nyheter

Koster Injection G4 - London Underground

Koster Injection G4 - London Underground

Park Plaza Hotel in London

Park Plaza Hotel in London

Cable duct sealing for D.L.R. - Koster Injection Systems

Cable duct sealing for D.L.R. - Koster Injection Systems

Glasgow Underground.  Koster Injection Systems.

Glasgow Underground. Koster Injection Systems.