Acoustic Floor Panel- Isocheck 28T, 24T & 15T - Acoustic Floor - Platform Floating Floor
Verifisert av produsent for 1 måned siden
Isocheck 28T
Isocheck 28T
High performance acoustic floor board. Overlay for timber separating floors.
Applikasjon
- Acoustic floor board to be used over existing floorboards for conversions, refurbishments, listed buildings requiring minimal structural change or new build with a decoupled ceiling.
- Isocheck 15T has also been tested for use over water-fed underfloor heating systems.
Beskrivelse
Isocheck 28T, 24T and 15T acoustic floor board, is a high performance acoustic secondary floating floor systems designed to reduce impact sound transmission through traditional timber floors where no additional precautions are required for higher domestic loads in bathrooms and kitchens.
Isocheck 28T and 24T consist of a 6 mm layer of Isofiba bonded to 22 mm or 18 mm P5 V313 moisture resistant chipboard, whereas Isocheck 15T consists of a 5.5 mm layer of Isofiba bonded to 9 mm moisture resistant medium density fibreboard.
When installed as part of an Isomass approved separating floor construction either system enables a traditional timber joisted floor to meet the sound transmission standards of Approved Document E 2003 and subsequent amendments in 2004, 2010, 2013 and 2015.
Generell informasjon
Farge | Beige |
Overflatebehandling | Unfinished ProdusentveiledningChipboard. |
Materiale | Chipboard Medium density fibreboard (MDF) Felt |
Form | Rectangle |
Lengde | 2400 mm 1200 mm |
Bredde | 600 mm |
Høyde | 28 mm 24 mm 15 mm |
Uniclass | |
CAWS | K11/275 Acoustic separating floor system K11/25 Particleboard floating floor K11/225 Particleboard floating floor |
SKU Code | N/A |
Spesifikasjonsdata - Treforede kompositt lydisolasjonsplater
Klassifiseringsdata | |
Sound insulation rating | Airborne: 50 dB (DnT,w + Ctr); Impact: 55 dB (L’nT,w). Veiledning fra produsentComplies with Building Regulations Approved Document E when incorporated as part of an Isomass design (service available foc). |
Thickness | 28 mm. Veiledning for spesifikasjonsvalg: Chipboard: 22 mm; Isofiba: 6 mm. |
Board materials | Isofiba bonded to V313 moisture resistant chipboard. |
Type | Type P5. |
Karakter | MR (moisture-resistant). |
Edges | Tongued-and-grooved all edges. |
Bærekraftsdata
Inneholder Red List-materialer | Yes |
Opprinnelsesland for materiale | United Kingdom |
Produksjonsland for produktet | United Kingdom |
Materiale | Chipboard Medium density fibreboard (MDF) Felt |
Resirkulerbarhet | Composite can be separated and fully recycled |
Resirkulert innhold | 60 % |
Dokumentasjon
Dokumentasjonstype
Isocheck 15T - Safety Data Sheet
Isocheck 18T, 24T, 28T - Safety Data Sheet
Isocheck 15T,24T,28T - Data Sheet v3.8
Typical Floor Detail - Isocheck 18T
Lignende produkter fra Isomass Ltd
Acoustic Floor Panel- Isocheck 27C, 23C and 14C for concrete floors - Platform acoustic floor system