NBS Source
List your products

Saint-Gobain PAM UK

+44 (0)115 930 5000 www.saint-gobain-pam.co.uk

Sort by:

Showing 1-12 of 12

Cast iron above and below ground drainage systems

Details all the latest products within the Ensign above and below ground range and EEZI-FIT push-fit sanitary system. The manual details all the benefits of using cast iron and technical data and installation guidance. Also included is the Timesaver systems; above ground soil to BS416 part 2, and below ground system to BS437 and full details of the VortX range of floor, roof, and shower drains. Amongst the New product solutions added for 2019 are multi-waste manifolds with 6 x 2"bsp waste inlets in Ensign and EEZI-FIT versions, and the rodding branch a innovative new solution for horizontal pipework that offers significant time saving and subsequent cost savings to the installer.

Cast iron multi-waste manifold for low level connections

PAM have developed a multi-waste manifold for its Ensign mechanically jointed system to BS EN 877. The manifold offers 6 x 2" bsp inlets and an extended spigot to penetrate the floor slab. All inlets can be used thanks to an internal baffle and has been flow rate tested by CRM Rainwater Services. The manifolds are available in 100 and 150mm diameters.

Cast iron push-fit multi-waste manifold for low level connections

PAM have developed a multi-waste manifold for its EEZ-FIT cast iron push-fit sanitary system to BS EN 877. The manifold offers 6 x 2" bsp inlets and an extended spigot to penetrate the floor slab. All inlets can be used thanks to an internal baffle and has been flow rate tested by CRM Rainwater Services. The manifolds are available in 100 and 150mm diameters.

Classical specifiers manual

Saint-Gobain PAM UK - Ranges of traditional cast iron rainwater and gutter systems manufactured in accordance with BS460. The Classical range consists of 8 gutter profiles and fiitings in various sizes and circular, square and rectangular downpipe ranges and associated fittings supplied ina black water based primer. All the classical ranges can be supplied in a high quaity finished paint "Classical Plus" , black as standard witha range of colours available to order for immediate installation. The classical plus coating has been tested to 1500 hours salt spray and ultra-violet resistance.

Ensign EEZI-FIT: A Question of Time?

PAM conducted a time study comparing the EEZI-FIT push-fit system to BS EN 877 with HDPE using fusion welded joints and a stainless steel push-fit system. The study involved an experienced installer of all the materials who installed a 9m vertical stack representing 3 stories with the first floor in 150mm diameter. Each material was installed on separate days witnessed and time measured by the BRE. The EEZI-FIT range took 2 minutes longer than the stainless steel system but was 50% quicker to install than the HDPE system.

Ensign EEZI-FIT: The added value push-fit range

EEZI-FIT is a cast iron push-fit system for sanitary soil installations available in 100 and 150mm diameters. EEZI-FIT offers all the benefits of cast iron with the speed and simplicity of push-fit assembly. In a time trial study witnessed by the BRE EEZI-FIT was 50% quicker to install over a 9m high vertical stack against HDPE using fusion welded joints. EEZI-FIT cast iron is acoustically the best performing system on the market and using the acoustic brackets will exceed NR 30 without the need of pipe wrapping. EEZI-FIT being made of cast iron is fire rated A1 and requires no fire protection. See new above ground technical brochure for the latest range

New Ensign Rodding Branch

The new Ensign rodding branch that combines 8 components into one fitting. Traditionally, when the horizontal pipework changes direction, installers would need to add a short length of pipe, and end cap to allow access for rodding, a support bracket and even, on certain installations, a set of pressure grip collars to accommodate thrust pressures at the end of a pipe run. This entire process can involve the use of up to eight separate components and would take a significant amount of time, even for experienced installers. The new 100mm diameter branches are available in 45° angles for horizontal directional change and 90° angles for use where the vertical pipe stack connects to the horizontal pipe run.

PAM cast iron drainage solutions adding value to Commercial and residential developments

An overview document of PAM cast iron drainage solutions for Commercial, public and residential buildings. PAM provide solutions for the complete building from under the building below ground pipes and fittings, suspended pipework in basements, to the main risers for foul soil and waste, venting and rainwater. PAM have mechanical and push-fit solutions, Ensign to standard BS EN877 and Timesaver manufactured to British Standards.

Timesaver Specifiers manual

Full details of the Timesaver cast iron above and below ground drainage systems. Timesaver above ground system kitemark approved to BS 416 part2, mechanically jointed system - which also includes push-fit heritage couplings which givea traditional socket and spigot appearance ideal for external soil stacks. Timesaver below ground drainage system kiteamrk approved to BS437. The true fit and forget below ground system, imensely strong, and with all the british type drain fittings, gullies, bellmouths traps, inspection chambers etc.

VortX floor drainage products

VortX Range of cast iron floor and shower gullies and associated accessories. Innovative P and S trap designs lightweight and allow space saving installation and a patented bottle trap with twist & lock mechanism. Full range of gratings in Nickel bronze and stainless steel including anti-ligature for all types of floor finish, extension pieces, reducers, and spigot adaptors to connect to any pipework material. New range of deep gullies, brewery traps and bell traps introduced with robust ductile iron gratings, or will accommodate smaller nickel bronze/ stainless gratings.

VortX Roof drainage products

VortX - range of cast iron roof outlets and accessories. Vertical, horizontal, balcony and two-way (parapet) roof outlets designed in accordance with BS EN1253 with various grating options, clamping rings, and spigot adaptors.

Showing 1-12 of 12