NBS Source
List your products

Ronacrete Ltd

Specialist construction products

+44 (0)1279 638700 www.ronacrete.co.uk

Sort by:

Showing 1-36 of 50

Monoprufe DPM

Liquid applied damp proof membrane (DPM).

Ronabond Bedding Mortar

Pre-packed, polymer-modified mortar for bedding and bonding. It is suitable for interior and exterior bonding and bedding of components such as brick slips, kerbs and copings to concrete, render and brick.

Features:

  • Compressive strength: >50 N/mm² after 28 days.
  • Bond strength: >1.5 N/mm² (in excess of tensile strength of concrete).
  • Shrinkage: 0.01%.
  • Thermal coefficient of expansion similar to concrete.
  • Waterproof and frost proof.

Application:

  • Prepare substrate in accordance with instructions.
  • Prime substrate with Ronacrete Standard Primer.
  • Apply mortar to wet or tacky primer, minimum layer thickness 6 mm.
  • Prime the slip/ coping/ kerb with Ronacrete Standard Primer.
  • Support as necessary until mortar has gained strength.

Ronabond Concrete Repair Mortar

High strength, pre-packed polymer modified mortar for repairing concrete and protecting reinforcement. It is suitable for interior and exterior structural repairs.

Features:

  • Compressive strength: 50 N/mm² at 28 days.
  • Cover to steel (minimum): 15 mm required under normal conditions.
  • Durability: 'at least the life of the surrounding concrete' (BBA Cert. 90/ 2421).
  • Excellent adhesion to concrete and flexural strength.
  • Hand or wet spray applied.
  • Thermal movement compatible with concrete.
  • Water, frost and superior carbonation resistant.

Application:

  • Prepare concrete in accordance with instructions.
  • Prime exposed steel and prepared concrete with Ronacrete Standard Primer.
  • Apply mortar to wet or tacky primer.
  • Build multiple layers, as required; prime between layers.
  • Cure using Ronacrete Curing Membrane or cover with tight fitting polythene.
  • As required, apply further coatings or treatments.

RonaBond MCI

Corrosion inhibitor for reinforced concrete.

RonaDeck Resin Bound Surfacing

RonaDeck Resin Bound Surfacing is a UV stable resin bound aggregate surface for pedestrian and vehicular traffic. The surfaces are decorative and functional, seamless and slightly flexible. The open matrix allows water to drain through to the base, eliminating water ponding and allowing water to drain to planted areas or land drains. May be applied to SuDS compliant bases and sub-bases, reducing the impact of urban development on flood risk and allowing water to flow into water courses. Edgings created from brick, stone, timber or steel should be installed to retain and protect the resin bound surfacing.

A two component polyurethane hybrid resin which binds a range of selected decorative kiln dried aggregates. It provides an attractive porous surface which is strong enough for foot and light vehicle traffic.

Features:

  • Natural appearance.
  • UV-stable, non-yellowing resin.
  • Recycled aggregates available.
  • Highly permeable.
  • Slip resistant.

Applications:

  • Footpaths, playgrounds, pool and pond surrounds.
  • Patios, terraces and water features.
  • Car parks.
  • Driveways.
  • Access roads.

Ronafix for Bedding Mortar

Ronafix admixture produces Ronafix Mix C, a high strength, waterproof bedding and bonding mortar. It is suitable for interior and exterior bonding and bedding of components such as brick slips, kerbs and copings to concrete, render and brick.

Features:

  • Impermeable to liquid water.
  • Improves wear resistance and resistance to freeze/ thaw cycling.
  • Increases compressive and flexural strength.
  • Reduces compressive modulus.
  • Reduces shrinkage, water demand and aids early drying.

Application:

  • Prepare substrate as instructions.
  • Prime substrate with a slurry of Ronafix and cement 1:1 by volume.
  • Apply mortar to the wet or tacky primer, minimum layer thickness 6 mm.
  • Prime the slip/ coping/ kerb.
  • Apply to wet mortar and press in place.
  • Support as necessary until the mortar has gained strength.

Ronafix for Concrete Repair - Mix D

Ronafix admixture produces Ronafix Mix D, a high strength waterproof, frost resistant mortar with very low permeability to CO2 gas. It is suitable for repairing reinforced concrete.

Features:

  • Impermeable to liquid water.
  • Improves wear resistance and resistance to freeze/ thaw cycling.
  • Increases compressive and flexural strength.
  • Reduces compressive modulus.
  • Reduces shrinkage, water demand and aids early drying.

Application:

  • Prepare concrete in accordance with instructions.
  • Prime exposed steel and prepared concrete with a slurry of Ronafix and cement 1:1 by volume.
  • Apply mortar to wet or tacky primer.
  • Build multiple layers, as required; prime between layers.
  • Cure using Ronacrete Curing Membrane or cover with tight fitting polythene.
  • As required, apply further coatings or treatments.

Ronafix for Renders - Mix A Render/ Screed

Ronafix admixture produces thin renders for interior and exterior use and dependent on mix, Ronafix renders are water resistant or waterproof.

Features:

  • Concrete colour.
  • Resistant to frost and some chemicals.
  • Variable texture according to mix design and applied finish.

Application:

  • Prepare substrate as instructions.
  • Prime substrate with slurry of Ronafix & cement, 1:1 by volume.
  • Apply two layers of render in accordance with instructions.
  • Ensure intermediate layers are combed and primed.
  • Ensure day joints do not coincide in consecutive layers.
  • Cure render in accordance with instructions.

Ronafix for Renders - Mix E Tanking Render

Ronafix admixture produces thin renders for interior and exterior use and dependent on mix, Ronafix renders are water resistant or waterproof.

Features:

  • Concrete colour.
  • Resistant to frost and some chemicals.
  • Variable texture according to mix design and applied finish.

Application:

  • Prepare substrate as instructions.
  • Prime substrate with slurry of Ronafix & cement, 1:1 by volume.
  • Apply two layers of render in accordance with instructions.
  • Ensure intermediate layers are combed and primed.
  • Ensure day joints do not coincide in consecutive layers.
  • Cure render in accordance with instructions.

Ronafix for Screeds - Mix A Screed 6–50 mm

Ronafix is a water-based, modified styrene butadiene polymer admixture with four main uses:

  • Bedding and bonding mortars.
  • Concrete repair mortars.
  • Floor screeds – thin section wearing or levelling, fine concretes and floor repair.
  • Water resistant and tanking renders.

Features:

  • Concrete colour, variable texture according to mix design and applied finish.
  • Dependent on mix, resistant to water, frost and chemicals.
  • Improves resistance to freeze/ thaw cycling.
  • Improves wear resistance.
  • Increases compressive and flexural strength.
  • Reduces compressive modulus.
  • Reduces permeability or renders impermeable to liquid water according to the mix design.
  • Reduces shrinkage and water demand, aiding early drying.

Ronafix for Screeds - Mix A1 Screed 25 mm Plus

Ronafix is a water-based, modified styrene butadiene polymer admixture with four main uses:

  • Bedding and bonding mortars.
  • Concrete repair mortars.
  • Floor screeds – thin section wearing or levelling, fine concretes and floor repair.
  • Water resistant and tanking renders.

Features:

  • Concrete colour, variable texture according to mix design and applied finish.
  • Dependent on mix, resistant to water, frost and chemicals.
  • Improves resistance to freeze/ thaw cycling.
  • Improves wear resistance.
  • Increases compressive and flexural strength.
  • Reduces compressive modulus.
  • Reduces permeability or renders impermeable to liquid water according to the mix design.
  • Reduces shrinkage and water demand, aiding early drying.

Ronafix for Screeds - Mix B wearing Screed 15–25 mm

Ronafix is a water-based, modified styrene butadiene polymer admixture with four main uses:

  • Bedding and bonding mortars.
  • Concrete repair mortars.
  • Floor screeds – thin section wearing or levelling, fine concretes and floor repair.
  • Water resistant and tanking renders.

Features:

  • Concrete colour, variable texture according to mix design and applied finish.
  • Dependent on mix, resistant to water, frost and chemicals.
  • Improves resistance to freeze/ thaw cycling.
  • Improves wear resistance.
  • Increases compressive and flexural strength.
  • Reduces compressive modulus.
  • Reduces permeability or renders impermeable to liquid water according to the mix design.
  • Reduces shrinkage and water demand, aiding early drying.

Ronafix for Screeds - Mix B1 Wearing Screed 25 mm Plus

Ronafix is a water-based, modified styrene butadiene polymer admixture with four main uses:

  • Bedding and bonding mortars.
  • Concrete repair mortars.
  • Floor screeds – thin section wearing or levelling, fine concretes and floor repair.
  • Water resistant and tanking renders.

Features:

  • Concrete colour, variable texture according to mix design and applied finish.
  • Dependent on mix, resistant to water, frost and chemicals.
  • Improves resistance to freeze/ thaw cycling.
  • Improves wear resistance.
  • Increases compressive and flexural strength.
  • Reduces compressive modulus.
  • Reduces permeability or renders impermeable to liquid water according to the mix design.
  • Reduces shrinkage and water demand, aiding early drying.

Ronafix for Screeds - Mix F Floating Screeds 35 mm Plus

Ronafix is a water-based, modified styrene butadiene polymer admixture with four main uses:

  • Bedding and bonding mortars.
  • Concrete repair mortars.
  • Floor screeds – thin section wearing or levelling, fine concretes and floor repair.
  • Water resistant and tanking renders.

Features:

  • Concrete colour, variable texture according to mix design and applied finish.
  • Dependent on mix, resistant to water, frost and chemicals.
  • Improves resistance to freeze/ thaw cycling.
  • Improves wear resistance.
  • Increases compressive and flexural strength.
  • Reduces compressive modulus.
  • Reduces permeability or renders impermeable to liquid water according to the mix design.
  • Reduces shrinkage and water demand, aiding early drying.

Ronafix for Screeds - Mix G Fine Concrete

Ronafix is a water-based, modified styrene butadiene polymer admixture with four main uses:

  • Bedding and bonding mortars.
  • Concrete repair mortars.
  • Floor screeds – thin section wearing or levelling, fine concretes and floor repair.
  • Water resistant and tanking renders.

Features:

  • Concrete colour, variable texture according to mix design and applied finish.
  • Dependent on mix, resistant to water, frost and chemicals.
  • Improves resistance to freeze/ thaw cycling.
  • Improves wear resistance.
  • Increases compressive and flexural strength.
  • Reduces compressive modulus.
  • Reduces permeability or renders impermeable to liquid water according to the mix design.
  • Reduces shrinkage and water demand, aiding early drying.

Ronafix Pre-Packed Fine Concrete

Supplied as a pre-packed, ready to use mortar for laying floor screeds, complete with all the correct components in one pack, together with a bottle of polymer gauging liquid. They are used with Ronacrete Standard Primer which gives monolithic adhesion to all correctly prepared surfaces.

A high strength pre-packed polymer modified concrete for high strength, wearing surfaces. It is strong, durable and resistant to water and frost attack.

Applications:

  • Thin section bonded wearing screed from 25 mm.
  • New screeds and refurbishment of old screeds.
  • Internal and external application.
  • Suitable for industrial, commercial, retail and domestic use.

Features:

  • Can be laid to a minimum thickness of 25 mm.
  • Can be trafficked as early as 24 hours after laying.
  • Frost proof, waterproof, chemical resistant.
  • Resistant to steam cleaning.
  • Pre-packed for increased confidence.

CE Certification to BS EN 13813.

Ronafix Pre-packed Floating Screed 35 mm

Supplied as a pre-packed, ready to use mortar for laying floor screeds, complete with all the correct components in one pack, together with a bottle of polymer gauging liquid. They are used with Ronacrete Standard Primer which gives monolithic adhesion to all correctly prepared surfaces.

A high strength pre-packed polymer modified mortar for thin section, high strength, waterproof floating screeds. It is strong, durable and resistant to water and frost attack.

Applications:

  • Thin section, floating screed from 35 mm.
  • New screeds and refurbishment of old screeds.
  • Internal and external application.
  • Suitable for industrial, commercial, retail and domestic use.

Features:

  • Can be trafficked as early as 24 hours after laying.
  • Can be laid down to a thickness of 35 mm.
  • Frost proof, waterproof, chemical resistant.
  • Can be steam cleaned.
  • Pre-packed for increased confidence.

CE Certification to BS EN 13813.

Ronafix Pre-packed Render/ Screed

A pre-packed mortar supplied complete with dry powders and a bottle of polymer gauging liquid.

It provides a weatherproof mortar and is bonded with Ronacrete Standard Primer.

Features:

  • Waterproof.
  • Frostproof.
  • High compressive strength.
  • High tensile strength.
  • High flexural strength.
  • Pre-packed for increased confidence.
  • Can be laid from 6 mm.
  • Trafficable after 24 hours.

Ronafix Pre-packed Screeds - 25 mm Plus

Supplied as a pre-packed, ready to use mortar for laying floor screeds, complete with all the correct components in one pack, together with a bottle of polymer gauging liquid. They are used with Ronacrete Standard Primer which gives monolithic adhesion to all correctly prepared surfaces.

A high strength pre-packed polymer modified mortar for thin section, high strength, waterproof screeds. It is strong, durable and resistant to water and frost attack.

Applications:

  • Thin section, bonded screed from 25 mm.
  • New screeds and refurbishment of old screeds.
  • Internal and external application.
  • Suitable for industrial, commercial, retail and domestic use.

Features:

  • Can be trafficked as early as 24 hours after laying.
  • Can be laid down to a thickness of 25 mm.
  • Frost proof, waterproof, chemical resistant.
  • Pre-packed for increased confidence.

CE Certification to BS EN 13813.

Ronafix Pre-packed Screeds - 6–50 mm

Supplied as a pre-packed, ready to use mortar for laying floor screeds, complete with all the correct components in one pack, together with a bottle of polymer gauging liquid. They are used with Ronacrete Standard Primer which gives monolithic adhesion to all correctly prepared surfaces.

A high strength pre-packed polymer modified mortar for thin section, high strength, waterproof screeds. It is strong, durable and resistant to water and frost attack.

Applications:

  • Thin section, bonded screed from 6 mm.
  • New screeds and refurbishment of old screeds.
  • Internal and external application.
  • Suitable for industrial, commercial, retail and domestic use.

Features:

  • Can be trafficked as early as 24 hours after laying.
  • Can be laid down to a thickness of 6 mm.
  • Frost proof, waterproof, chemical resistant.
  • Pre-packed for increased confidence.

CE Certification to BS EN 13813.

Ronafix Pre-Packed Tanking Render

A pre-bagged cement render supplied complete with dry powders and a bottle of polymer gauging liquid. It provides a watertight and tanking render and is bonded with Ronacrete Standard Primer.

Features:

  • Waterproof.
  • Frostproof.
  • High compressive strength.
  • High tensile strength.
  • High flexural strength.
  • Pre-packed for increased confidence.
  • Can be laid from 6 mm.

Ronafix Pre-packed Wearing Screed - 15–25 mm

Supplied as a pre-packed, ready to use mortar for laying floor screeds, complete with all the correct components in one pack, together with a bottle of polymer gauging liquid. They are used with Ronacrete Standard Primer which gives monolithic adhesion to all correctly prepared surfaces.

A high strength pre-packed polymer modified mortar for thin section, high strength, waterproof, wearing screeds. It is strong, durable and resistant to water and frost attack.

Applications:

  • Thin section bonded wearing screed, minimum 15 mm.
  • New screeds and refurbishment of old screeds.
  • Internal and external application.
  • Suitable for industrial, commercial, retail and domestic use.

Features:

  • Can be laid to a minimum thickness of 15 mm.
  • Can be trafficked as early as 24 hours after laying.
  • Frost proof, waterproof, chemical resistant.
  • Resistant to steam cleaning.
  • Pre-packed for increased confidence.

CE Certification to BS EN 13813.

Ronafix Pre-packed Wearing Screed - 25 mm Plus

Supplied as a pre-packed, ready to use mortar for laying floor screeds, complete with all the correct components in one pack, together with a bottle of polymer gauging liquid. They are used with Ronacrete Standard Primer which gives monolithic adhesion to all correctly prepared surfaces.

A high strength pre-packed polymer modified mortar for thin section, high strength, waterproof, wearing screeds. It is strong, durable and resistant to water and frost attack.

Applications:

  • Thin section bonded wearing screed, minimum 25 mm.
  • New screeds and refurbishment of old screeds.
  • Internal and external application.
  • Suitable for industrial, commercial, retail and domestic use.

Features:

  • Can be laid to a minimum thickness of 25 mm.
  • Can be trafficked as early as 24 hours after laying.
  • Frost proof, waterproof, chemical resistant.
  • Resistant to steam cleaning.
  • Pre-packed for increased confidence.

CE Certification to BS EN 13813.

Ronafix Underfloor Heating Screed

Ronafix Underfloor Heating Screed is supplied as a pre-packed polymer modified, ready to use mortar for laying floor screeds on underfloor heating systems. Supplied complete as a bag of dry components and a bottle of polymer gauging liquid.

Features:

  • Pre-packed formulation for consistent high performance.
  • For use with underfloor heating systems.
  • High early strength and fast drying allows earlier commissioning of heating systems.
  • 45 mm minimum thickness with 16 mm heating pipes.
  • Requires only 25 mm cover over heating pipes.
  • Ready for foot traffic after 24 hours.
  • Rapid drying; can receive floor coverings such as vinyl, tiles and carpet after 10 days at 50 mm thick.
  • Excellent resistance to passage of water and water vapour.

Benefits:

  • Meets the requirements of Category A (Very Heavy Traffic) of BRE Drop Hammer Test in accordance with BS 8204-1:1999.
  • Meets the requirements of BS 8204-1, Category C floating screeds at 45 mm.
  • Unaffected by continued exposure to freeze / thaw cycling.

Showing 1-36 of 50