NBS Source
List your products

Radmat Building Products Ltd

+44 (0)1858 410372 www.radmat.com

Sort by:

Showing 1-36 of 69

Adhesion Tests

Use this clause to determine if the substrate has been properly cleaned by applying a test patch of the Permaquik 6100 system to the surface and checking its adhesion. If a sound bond is achieved, the general application can proceed. Frequent bond checks should be made during the application of the Permaquik 6100 system to ensure the integrity of the installation.

Drainage mat

A combined filter and drainage membrane for use in green roof applications.

Esha Primer

Esha Primer is a quick drying black bitumen priming solution designed to penetrate and seal a variety of porous surfaces including masonry, concrete, cementitious screed/ renders, existing bituminous waterproofing and structural steelwork. Esha Primer creates a base seal and improves the adhesion of bituminous waterproofing solutions. Esha Primer is a mixture of high quality bitumen and hydrocarbon solvents.

Esha SA Primer

Esha SA Primer is a solvent based cold applied bituminous primer for use with Esha SA roofing felts and Esha Universal SA on metal, concrete, stone or timber. Esha SA Primer is not usable for EPS or XPS foam and weakened PVC.

EshaBase Alu

A vapour barrier for bituminous roofing systems.

EshaBase SA

EshaBase SA is a self-adhesive SBS modified base layer for bituminous roofing system. Suitable for all types of roof with a flat or sloped roof construction on new build or refurbishment. For all applicable roofing systems see Esha System information sheets and KOMO certificate.

EshaBase SA should be fully cold bonded to surface pre-coated with Esha SA Primer.

Certificates:

KOMO certificate: K66713, NL-BSB: K66717, CE-0620.

EshaBase SA Alu 2 mm

EshaBase SA Alu 2 mm is a self-adhesive aluminium cored vapour barrier for bituminous roofing systems. Suitable for all types of roof with a flat or sloped roof construction on new build or refurbishment. For all applicable roofing systems see Esha System information sheets and KOMO certificate.

EshaBase SA should be fully cold bonded to surface pre-coated with Esha SA Primer.

Certificates:

Product characteristics report BDA 0059-L-11/3, CE-0620.

EshaBase SA Alu 4.2 mm

EshaBase SA Alu 4.2 mm is a self-adhesive aluminium cored vapour barrier for bituminous roofing systems. Suitable for all types of roof with a flat or sloped roof construction on new build or refurbishment. For all applicable roofing systems see Esha System information sheets, KOMO certificate and FM approvals.

EshaBase SA should be fully cold bonded to surface pre-coated with Esha SA Primer.

Certificates:

  • FM approved ID: 3017648.
  • Product characteristics report BDA 0059-L-11/3.
  • CE according to BS EN 13970.

EshaBond

EshaBond is a cold applied bituminous adhesive for use with Esha Universal, EshaGum 446 KK and EshaGum 470 KK Black mineral. It is a mixture of polymer modified bitumen, additives and solvents. Applicable to a maximum slope of 5°.

EshaFlex 370

EshaFlex 370 is a torch applied SBS modified bitumen cap sheet in loose laid and ballasted systems, or as base layer in two layer torch on systems. EshaFlex 370 is an SBS modified bituminized polyester fibreglass composite with a sanded surface. Suitable for all types of roof with a flat or sloped roof construction on new build or refurbishment. Overlaps must be torched.

For all applicable roofing systems see Esha System Information Sheets and KOMO certificate.

Certificates:

KOMO certificate: K66713, NL-BSB: K66717, CE-0620.

EshaFlex 370 Black

EshaFlex 370 Black is a torch applied SBS modified bituminized polyester/ fibreglass composite cap sheet with a black mineral finish for use in bituminous roofing systems. Suitable for all types of roof with a flat or sloped roof construction on new build or refurbishment. Overlaps must be torched.

For all applicable roofing systems see Esha System Information Sheets and KOMO certificate.

Certificates:

KOMO certificate: K66713, NL-BSB: K66717, CE-0620.

EshaFlex 370 Grey

EshaFlex 370 Grey is a torch applied SBS modified bituminized polyester/ fibreglass composite cap sheet with a grey mineral finish for use in bituminous roofing systems. Suitable for all types of roof with a flat or sloped roof construction on new build or refurbishment. Overlaps must be torched.

For all applicable roofing systems see Esha System Information Sheets and KOMO certificate.

Certificates:

KOMO certificate: K66713, NL-BSB: K66717, CE-0620.

EshaFlex 370 MF Black

EshaFlex 370 MF Black is a single layer mechanically fastened SBS modified bituminized polyester/ fibreglass composite cap sheet with a black mineral finish. Suitable for all types of roof with a flat or sloped roof construction on new build or refurbishment. Overlaps must be torched.

For all applicable roofing systems see Esha System Information Sheets and KOMO certificate.

Certificates:

KOMO certificate: K66713, NL-BSB: K66717, CE-0620.

EshaFlex 370 SA Black

EshaFlex 370 SA Black is a self-adhesive SBS modified bituminized polyester/fibreglass composite cap sheet with a black mineral finish for use in bituminous roofing systems. Suitable for all types of roof with a flat or sloped roof construction on new build or refurbishment. End overlaps may be welded with hot air.

For all applicable roofing systems see Esha System Information Sheets and KOMO certificate.

EshaFlex 370 SA Black should be fully cold bonded to a suitable substrate pre-coated with Esha SA Primer.

Certificates:

KOMO certificate: K66713, NL-BSB: K66717, CE-0620.

EshaFlex 370 WS Mini Slate

EshaFlex 370 WS Mini Slate is a root resistant torch applied SBS modified bituminized polyester/ fibreglass composite cap sheet with a black mineral finish for use in bituminous green/ biodiverse roofing systems. Suitable for all types of roof with a flat or sloped roof construction on new build or refurbishment. Overlaps must be torched.

For all applicable roofing systems see Esha System Information Sheets and KOMO certificate.

Certificates:

  • KOMO certificate: K66713, NL-BSB: K66717, CE-0620.
  • Root resistance tested according to BS EN 13948.

EshaFlex 370 z/z

EshaFlex 370 z/z is an SBS modified bituminized cap sheet in loose laid and ballasted systems or as base layer in pour and roll systems. EshaFlex 370 z/z is an SBS modified bituminized polyester fibreglass composite with a sanded finish on both sides. Suitable for all types of roof with a flat or sloped roof construction on new build or refurbishment. Overlaps must be sealed with hot bitumen.

For all applicable roofing systems see Esha System Information Sheets and KOMO certificate.

Certificates:

KOMO certificate: K66713, NL-BSB: K66717, CE-0620.

EshaFlex TK40

EshaFlex TK40 is a thermo adhesive vapour pressure distribution base layer for use in partially bonded two layer systems. EshaFlex TK40 is an SBS modified bituminized fibreglass fabric with a strip applied thermal adhesive coating. Suitable for all types of roof with a flat or sloped roof construction on new build or refurbishment. EshaFlex TK40 is a torch-on roll.

For all applicable roofing systems see Esha System Information Sheets and KOMO certificate.

Certificates:

KOMO certificates: K66713 and K66714, NL-BSB: K66717, CE-0620.

EshaFlex TK60 Black Mineral

EshaFlex TK60 Black Mineral is a vapour pressure distribution cap sheet for use in single layer partially bonded systems. EshaFlex TK60 Black Mineral is an SBS modified bituminized polyester fibreglass composite with black mineral chippings to the upper surface and a strip applied thermal adhesive coating. Suitable for all types of roof with a flat or sloped roof construction on new build or refurbishment. EshaFlex TK60 is a torch-on roll.

For all applicable roofing systems see Esha System Information Sheets and KOMO certificate.

Certificates:

KOMO certificates: K66713, NL-BSB: K66717, CE-0620.

EshaGum

Built-up bituminous roofing system.

EshaGum 460P14 3 mm

EshaGum 460P14 3 mm can be applied as a first layer on upstands on almost every roof. EshaGum 460P14 3 mm is a torch applied APP modified bituminized base layer. Suitable for all types of roof with a flat or sloped roof construction on new build or refurbishment. Overlaps must be torched.

For all applicable roofing systems see Esha System Information Sheets and KOMO certificate.

Certificates:

KOMO certificates: K66714, NL-BSB: K66717, CE-0620.

EshaGum 470

EshaGum 470 is a torch applied APP modified bitumen cap sheet or as base layer in two layer torch on systems. EshaGum 470 is an APP modified bituminized polyester fibreglass composite with a sanded surface. Suitable for all types of roof with a flat or sloped roof construction on new build or refurbishment. Overlaps must be torched.

For all applicable roofing systems see Esha System Information Sheets and KOMO certificate.

Certificates:

KOMO certificates: K66714, NL-BSB: K66717, CE-0620.

EshaGum 470 Black

EshaGum 470 Black is a torch applied APP modified bituminized polyester/ fibreglass composite cap sheet with a black mineral finish for use in bituminous roofing systems. Suitable for all types of roof with a flat or sloped roof construction on new build or refurbishment. Overlaps must be torched.

For all applicable roofing systems see Esha System Information Sheets and KOMO certificate.

Certificates:

KOMO certificates: K66714, NL-BSB: K66717, CE-0620.

EshaGum 470 Red

EshaGum 470 Red is a torch applied APP modified bituminized polyester/ fibreglass composite cap sheet with a red mineral finish for use in bituminous roofing systems. Suitable for all types of roof with a flat or sloped roof construction on new build or refurbishment. Overlaps must be torched.

For all applicable roofing systems see Esha System Information Sheets and KOMO certificate.

EshaTherm PIR B

EshaTherm PIR B is a rigid polyisocyanurate (PIR) foam insulation for use in bituminous roofing systems on suitable surfaces. EshaTherm PIR B is a rigid polyisocyanurate (PIR) foam core faced with bitumen coated glass fibre tissue on one side and polypropylene fleece on the other. The PIR foam core is temperature tolerant and withstands the application of hot bitumen to the surface temperature of 240°C.

Certificates:

EshaTherm PIR B is compliant with BS EN 4841-4, British Board of Agrément (BBA) certificate number 07/4487.

EshaTherm PIR B Tapered

EshaTherm PIR B tapered is a tapered rigid polyisocyanurate (PIR) foam insulation for use in bituminous roofing systems on suitable surfaces. As part of a tapered roofing scheme EshaTherm PIR B tapered provides roof surfaces with a finished fall of either 1:60 or 1:80. EshaTherm PIR B is a rigid polyisocyanurate (PIR) foam core faced with bitumen coated glass fibre tissue on one side and polypropylene fleece on the other. The PIR foam core is temperature tolerant and withstands the application of hot bitumen to the surface temperature of 240°C.

Certificates:

EshaTherm PIR B Tapered is compliant with BS EN 4841-4, British Board of Agrément (BBA) certificate number 07/4487.

EshaTherm PIR OSB Comp

EshaTherm PIR OSB Comp is a rigid polyisocyanurate (PIR) foam insulation and OSB composite for use in new build and refurbishment projects. EshaTherm PIR OSB Comp is a rigid polyisocyanurate (PIR) foam core faced with an exterior grade FSC Certified Grade 3 OSB and an aluminium foil backing. The PIR foam core is temperature tolerant and withstands the application of hot bitumen to the surface temperature of 240°C.

Certificates:

Covered by British Board of Agrément (BBA) certificate number 07/4487.

Showing 1-36 of 69