ProWarm

ProWarm

World's largest supplier of Underfloor Heating

+44(0)1268 567019 www.prowarm.com

Sort by:

Showing 1-14 of 14

ProTouch-E WiFi Thermostat

ProTouch-E WiFi Thermostat

ProWarm

The Prowarm ProTouch-E Smart Thermostat offers easy use control over you electric underfloor heating system. ProTouch-E Smart WiFi Thermostat enables control without the need for a control centre, just pair to home WiFi using the easy to use application available on both Android and IOS platforms. Designed to enhance the experience of the end user with a 7-day programmer, optimal start features, multi temperature display and easy to read displays.
ProWarm Aluminium Spreader Plate

ProWarm Aluminium Spreader Plate

ProWarm

Aluminium heat spreader plates are 390mm x 1000mm x 0.3mm (groove depth: 16mm) diffiuser plates suitable for joist centers of 400mm. Spreader plates are laid across traditional joists and fixed in place using a hand stapler. ProWarm European Standard Pex-Al-HDPE pipe is fixed in the grooves of the plates, insulation is placed in the void below the plates to minimise downward heat loss and dissipate the heat even across the floor. This product is designed for use with 15mm or 16mm pipe.
ProWarm Backer Pro Insulation Board

ProWarm Backer Pro Insulation Board

ProWarm

ProWarm BACKER-PRO insulation boards are high quality extruded polystyrene panels, covered with a fibreglass mesh on both sides, for use with our under tile heating cables and mats (not suitable for our underwood systems). Available in 6mm, 10mm, 12.5mm, 20mm, 30mm & 50mm thickness. They are ideal for two primary purposes; as a superior waterproof surface to fix wall or floor tiles and as a first class heat insulation for underfloor heating systems. ProWarm BACKER-PRO insulation boards are particularly suited to underfloor and under tile heating applications. Installation below underfloor heating systems on an existing un-insulated concrete or timber sub-floor will greatly reduce heat up time and running costs
Prowarm Floating Floor Panel (25mm)

Prowarm Floating Floor Panel (25mm)

ProWarm

ProWarm floating floor panels (1200mm x 1200mm x 25mm) are ideal for installations where a finished floor is required within a minimum time scale. No wet trades are needed, making it a very fast system to install and means no waiting time for screed to dry. Panels can be installed onto existing suitable subfloors ie: solid concrete/screeded floors or suitable 18mm structurally sound wooden subfloors such as chipboard, plywood or floorboards. EPS panels are pre-routed in different patterns and are covered with a high tech aluminium foil. The foil distributes the heat evenly across the entire floor surface, the warm up time is drastically reduced , ProWarm Pex-Al-HDPE pipe sits flush inside the ProWarm insulation panels ready for your suitable wooden floor covering on top.
ProWarm Loose Cable

ProWarm Loose Cable

ProWarm

ProWarm Underfloor heating cable is a series type heating cable of with a twin conductor with cold lead of 3.0M on one side. The cable has resistance heating wire provided with a primary insulation of fluoropolymer then covered with metal shielding and final outer sheath. The final outer diameter of twin conductor cable is 2mm.
ProWarm Low Profile Floating Floor Panel (18mm)

ProWarm Low Profile Floating Floor Panel (18mm)

ProWarm

ProWarm low profile 18mm floating floor panels (1200mm x 600mm x 18mm) are ideal for installations where a finished floor is required within a minimum time scale. No wet trades are needed, making it a very fast system to install and means no waiting time for screed to dry.
ProWarm Manifolds

ProWarm Manifolds

ProWarm

ProWarm the market leaders in European Standard manifolds Manual valve for each port. Adjustable flow meter allows easy balancing. Factory pre-assembled on fixing brackets. Triple seal on pipe connections to eliminate leakage.
ProWarm Pex-Al-HDPE Pipework

ProWarm Pex-Al-HDPE Pipework

ProWarm

Crosslinked polyethylene PE-Xb internal layer, internal bonding layer, intermediate aluminium layer, external bonding layer, high density polyethylene HDPE external layer.
ProWarm ProDigital Thermostat

ProWarm ProDigital Thermostat

ProWarm

The Slimline Pro Digital features advanced controls for an entry-level thermostat. Able to use either floor, air or combination sensors to control the temperature, the Slimline Pro Digital is fully programmable for each individual day of the week. Available in stylish and contemporary white design with touch sensitive keys, the display has a modern white back light and offers both a holiday mode and manual override, plus up to four set points each day.
ProWarm ProFoam Insulation Board

ProWarm ProFoam Insulation Board

ProWarm

ProWarm ProFoam Board is our economy insulation specifically designed for use with our underwood heating and carpet heating mat systems. These boards are the most cost effective solution for underwood heating systems and also act as an underlay for your wooden floor. Please note that these boards are not suitable for our Undertile Heating Systems. Each board is 1200mm * 600mm and covers 0.72 - each pack of 14 will cover 10.08m2.
ProWarm ProGrid+

ProWarm ProGrid+

ProWarm

The ProWarm ProGrid+ matting and cable system is designed to make the installation of loose laid electric underfloor heating cable more efficient and less time consuming. The innovate grid system allows for the cable to be placed within the grooves and the pre-spaced design enables the user to install with the desired heat output per m2 without any additional need for tape or fixings. The ProGrid+ matting acts as housing for the cable and a decoupling membrane which prevents reflective cracking caused by shrinkage cracks, board joints and lateral movement.
ProWarm Sticky Mat

ProWarm Sticky Mat

ProWarm

ProWarm Electric Underfloor Heating Sticky Mats provide a reliable and effective underfloor heating system that can work with tiles and many other floor coverings (installation methods differ, please call us for advice). The ProWarm Electric Underfloor Heating Sticky Mats System consists of a thin loose wire, evenly spaced and attached to a sticky glass fibre mesh, which allows for the fastest and most secure installation method of electric underfloor heating. The system is available in a choice of 100 W/m2, 150 W/m2 and 200 W/m2 heat outputs.
ProWarm Underwood Mat

ProWarm Underwood Mat

ProWarm

ProWarm Under Wood system is an ultra thin electric radiant floor heating system primarily for use under laminate, engineered wood, glued hardwood and other floating floors. Advantage of using this system is the ease of installation and uniform heating of your laminate flooring. The special materials used makes it free from problems of Hot-Spots or localized heating. This system is made with Fluoropolymer insulated heating cables sandwiched between two layers of specially reinforced aluminium foil. The uniform spacing of the heating elements, further backed by the aluminium foil, ensures even heat distribution.
ProWarm XP-Pro Insulation Board

ProWarm XP-Pro Insulation Board

ProWarm

ProWarm XP-PRO Insulation Boards are specifically designed for use with our electric underfloor heating systems on concrete/screeded floors. XP-PRO Insulation Boards are also used as a high quality insulation for our underwood heating systems, these boards are available in 6mm, 10mm, 20mm, 30mm & 50mm thickness. High compressive strength (30tonnes / m2), light weight, high efficiency and low cost make this thermal board an ideal choice when fitting heating on to a poorly insulated concrete or screed base. 1 board covers 0.72m2 / boards are 1200 x 600mm.

Showing 1-14 of 14