NBS Source
JS Air Curtains

JS Air Curtains

The UK's Leading Air Curtain Specialist

+44 (0)1903 858656 www.jsaircurtains.com

Sort by:

Showing 37-38 of 38

Welcome Break for JS Air Curtains

Welcome Break for JS Air Curtains

JS Air Curtains

JS Air Curtains has supplied eight air curtains to the Welcome Break motorway services at Membury on the M4. The air curtains are helping to maintain internal temperatures even with the external doors in constant use.The air curtains were installed by Russell Air Conditioning. Five 2m Windbox air curtains and three HeatScreen air curtains are positioned at the front entrance, rear entrance and on some internal doorways.Ray Drinkwater, Facilities Manager at Membury Services, commented, “Without the air curtains the doors acted like a wind tunnel with the cold air blowing right through. The air curtains from JS were recommended by Russell Air Conditioning and have done a great job in stopping the cold air entering.”In total the air curtains are capable of providing over 21,000m3/h of airflow to seal the doorways. As well as keeping the heat in during the winter, they can also be used with the heaters off in the summer to prevent air conditioned air from escaping.The Windbox air curtain has a powerful output and can be used on doorways up to 3.5m high. It can be horizontally mounted above a doorway or vertically to the side. The units supplied to Welcome Break were white but the Windbox is available in any RAL colour to suit interior architecture. The air curtain can incorporate electric or low pressure hot water heating and is controlled from either a five-speed wall mounted controller, supplied with 20m of plug and play RJ45 cable, or via a BMS system.The other model used at Welcome Break was the HeatScreen air curtain. This is an economical air curtain with a maximum output of 1,670m3/h. It can be controlled either with the panel on the front of the unit or via a handheld remote control. It is available in lengths of 90cm, 120cm and 150cm, comes with two metres of electrical lead and can be wired to a single phase power supply.
Zen Air Curtain at Bishopsgate Refurb

Zen Air Curtain at Bishopsgate Refurb

JS Air Curtains

A Zen air curtain from JS Air Curtains is integrating seamlessly into the entrance hall at 1 Bishopsgate, following the building’s recent refurbishment. The air curtain is helping to keep the large reception warm whilst minimising heat-loss from the entrance. The office refurbishment was the first in the UK to achieve a Gold SKA rating and helped the Grade 2 listed building in the City of London achieve in excess of 30% savings in energy and CO2.The main heat loss from 1 Bishopsgate’s entrance hall was through the glass lobby fronting onto the street. The high ceiling called for air curtains that could easily be suspended above the lobby door and could deliver the heating output required to warm the generously proportioned reception area. Due to the prominent location, it was also specified that the air curtains must complement the modern architectural style of the building’s interior.Garry Merison, project manager for electrical contractors PIP Electrics, worked closely with JS Air Curtains to select the unit best suited to the building’s requirements. He said: “The 1.5m model provides a heating output up to 22.5kW which is ample in this application. The flexibility of installation with the Zen was a key benefit as we were able to hang it with drop rods to the required height. Its smart, minimalist design was another factor. We were able to choose from a selection of covers and decided that the anodized aluminium fascia would ensure it integrated unobtrusively into the entrance’s environment.”The Zen air curtain can be fitted with bespoke fascia panels that provide a corporate branding opportunity and can add to the functionality of the air curtain by including clocks or signage.The fascia can be made out of anodized aluminium (as standard), stainless steel or wood. It can have a gloss, matt or brushed finish. The central structure is made of zinc plated steel finished in RAL 9913 black forge as standard with any other RAL colour available on request.The Zen is offered in half metre lengths from 1 to 2.5m, with electric or water heaters, and as an air only model. The discharge vents have airfoil shaped vanes to direct the airflow creating a tighter seal across a doorway.Low noise, double inlet centrifugal fans with external rotor motors provide up to 6,475m3/h airflow making it suitable for use on doorways up to 3.5m.

Showing 37-38 of 38