NBS Source
List your products

BEMO Project Engineering UK Ltd

The Sky's The Limit

+44 (0)1773 853694 www.bemo.com/en

Sort by:

Showing 1-10 of 10

BEMO Aluminium Structural Decks

Perfect for swimming pools or other high humidity environments where corrosion is a key concern. Available perforated in varying depths and gauges to suit project specific span conditions and loading requirements.

BEMO N65 Standing Seam Profile

The high seam ensures excellent load-bearing capacity. The panel can be employed in all climate zones and for all building types.

A rubber seal can be integrated into the standing seam for added protection against water ingress. This makes the panel suitable for roofs with a pitch of less than 1.5°, and for deployment in areas with extreme wind, snow and sand loads.

BEMO Steel Lining

Designed as a cost effective liner able to span up to 1.8 m. Available as a solid liner, perforated for acoustics or curved to suit project requirements.

BEMO Steel Structural Decks

Available in both solid and perforated options, in varying depths and gauges to suit project specific span conditions and loading requirements.

BEMO-CLEAR Vapour Control Layer

The woven extruded polypropylene multifilament scrim reinforcing provides improved nail tear resistance. The sheet is translucent to ease the installation and later inspection of support arrangements.

BEMO-THERM Insulation

BEMO-THERM FactoryClad Rolls are manufactured 1200mm wide to suit commonly used rail and bracket systems and in long lengths, making them particularly suitable for use in twin skin profiled metal cladding systems and standing seam roofs.

Liner Sheet with Bar and Bracket

Using the COMBI-BAR System to create insulation voids able to low U value's. Includes varying height COMBI-BAR brackets, varying height halter clips and thermal barrier pads. This is a system suitable for purlin centres up to 1.5 m centres depending upon loadings.

Liner Sheet with GFK Thermal Halter

Using the GFK Thermal Halter to create insulation voids which can be smaller due to thermal free components. The GFK is a reinforced glass fibre halter designed to elinimate cold bridging. This system is suitable for purlin centres up to 1.5 m depending upon loadings.

Structural Deck with Bar and Bracket

Using the COMBI-BAR System to create insulation voids able to low U value's. Includes varying height COMBI-BAR brackets, varying height halter clips, thermal barrier pads and top hat sections. This system includes varying deck profiles able to span from 1.5 m to 9 m depending upon loadings.

Structural Deck with GFK Thermal Halter

Using the GFK Thermal Halter to create insulation voids which can be smaller due to thermal free components. The GFK is a reinforced glass fibre halter designed to elinimate cold bridging. This system includes various deck profiles able to span from 1.5 m to 9 m depending upon loadings.

Showing 1-10 of 10