NBS Source
List your products

3M DBI-SALA Fall Protection

The world’s leading manufacturer of Fall Protection Equipment and Engineered Safety Systems

+44 (0)1527 548000 www.go.3M.com/3mfallprotectionengineeredsystems

Sort by:

Showing 1-8 of 8

3M™ DBI-SALA® RoofSafe™ Rail

A permanent, structural or top fixed rigid aluminium safety and access horizontal rail system conforming to EN 795 type D 2012, TS 16415 and BS 8610.

Uni 8™ Cable System

The Uni 8™ Overhead Horizontal Lifeline System is a unique fall protection safety product. It offers both fall arrest and restraint capabilities using a 1 x 19 8mm stainless steel cable, which is secured to a structure using a range of anchorage fittings.
The two wheeled attachment carriages are secured to the system during installation and when in use move over the intermediate brackets without interruption. It is a true hands-free system. The horizontal lifeline system has a minimum breaking strength of 38 kN and can span up to 30 metres between intermediate supports. This is achieved through high pre-tension loading in the cable of 5kN combined with the properties of the 1 x 19 8 mm cable.

A complete range of structural end anchors are available to enable the horizontal lifeline system to integrate with the structure. The Uni 8™ Overhead Horizontal Lifeline is designed to provide a facility to enable safe working at heights in accordance with current regulations and safe access to a variety of otherwise dangerous situations, or to restrain personnel from putting themselves at risk. There are two types of horizontal lifeline.

Uni 8™ Overhead Cable System

The advanced design of Capital Safety’s RoofSafe™ Anchors allows customers to benefit from modern roofing design whilst ensuring safety and structural integrity.
Additionally, as the desire to comply with health and safety regulations increases, the need for safety solutions on older building and structures increases. Capital Safety’s RoofSafe™ Anchors are ideally suited for installation on an older building that requires a fall protection system.


The RoofSafe™ range includes anchors for use on a wide variety of roof types from wood and concrete to metal standing seam. Single point anchors are available along with ends, intermediate and corners for use in the RoofSafe™cable system. Each anchor comprises an energy absorbing module and a baseplate which is secured to the roof with rivets, toggles, clamps or concrete fixings depending on the roof type.
This single point or cable anchor system comprises an energy absorbing module and a baseplate which is suitable for membrane roof types.

UniRail™

A permanent, structural or top fixed rigid aluminium safety and access horizontal rail system conforming to EN 795 type D 2012, TS 16415 and BS 8610.

Showing 1-8 of 8