Mayplas

A foil-faced rock fibre slab for thermal and acoustic insulation.

Mayplas Acoustic Roof Slab is designed for use in double skinned metal roofing systems to enhance sound absorption performance. The tissue facing helps to avoid the slab edges from showing as shadows through the perforated inner sheet and helps prevent any fibrous particles from penetrating the perforations.Benefits:Class 0 fire performance.Excellent sound absorption.Tissue faced for visual effect.Suits all proprietary systems.

Mayplas Acoustic Floor Slab is designed for the acoustic insulation of separating floors and is glass tissue faced and rebated on all edges – it is ideally suited for both ‘wet’ construction (under 65 mm cement sand screed) and ‘dry’ construction (under flooring grade chipboard). Mayplas Thermal Floor Slab is designed for the thermal insulation of ground floors and is glass tissue faced with square edges.Benefits:25–100 mm thickness.Rebated and square edge types.Glass tissue faced for protection.Stable under cement sand screeds.

Rock fibre slab enclosed in black polythene.

The product consists of a resilient 36 kg/m³ density glass fibre roll faced on one side with bitumenized kraft paper - the paper facing has a 75 mm flange on one long side to overlap the adjoining roll. Complies with the resilient layer guidance given in 2003 edition of Approved Document E of the Building Regulations (E&W).Applications:A resilient layer under timber raft floating floors.A resilient layer under cement sand screed floating floors.Benefits:Easy to fit, cut and join.Meets Building Regulations.Helps reduce impact sound.75 mm flange for overlapping.

Bitumenized paper faced rock fibre slab.

Manufactured using polythene enclosed non combustible rockfibre in bespoke sizes designed to be compressed by 15 mm within the cavity - this 'made to measure' cavity barrier design provides a minimum of 1 hour fire resistance and is crucial in sound applications where 'flanking transmission' can be the weak link of an otherwise robust construction. Meets the requirements of:2000 Building Regulations (E&W) Approved Document B (Fire Safety).2003 Building Regulations (E&W) Approved Document E (Sound Resistance).Robust Details Part E.NHBC Standards 2005.Tested by Warrington Fire Research to provide one hour fire resistance – double the minimum requirement. Meets Parts B and E (including Robust Details) of the Building Regulations (E&W) 2000. Mayplas Deluxe and Party Wall Ranges have been assessed to provide two hours fire resistance.

Mayplas SD5 Foam is designed for use as a resilient layer under screeds in concrete base with floating layer constructions. Meets requirements in Robust Details Part E for Resilient Layer in separating floor - concrete E-FC-3.Benefits:Complies with Robust Detail E-FC-3.Helps reduce impact sound.Wide 1500 mm roll for less jointing.

Rock fibre Lamella slab laminated to moisture resistant chipboard.

Mayplas Insulated Wall Board is designed for use as a composite acoustic and thermal insulation/ plasterboard dry lining panel. It is suitable for new and refurbished buildings. It consists of a rock fibre crimped slab laminated to gypsum plasterboard with integral 15 mm acoustic fitting strip to help minimize acoustic flanking transmission at the floor/ wall junction.Benefits:Easy to cut and install.One operation – saves time.Ready for plastering/ decorating.Composite dry lining panel.

Acoustic insulation for perforated roof linings with trapezoidal profile.

Mayplas Acoustic Pad is designed for use in metal tray suspended ceiling systems. It helps reduce 'room-to-room' sound transmission over ceiling voids and helps dampen sound within the room. It is especially suitable for high tech or sensitive areas where loose fibres could cause problems. Fire rating to Class 0 of the Building Regulations (E&W).Benefits:No loose fibres in ceiling void.Helps reduce 'room-to-room' sound.Meets Class 0 of the Building Regulations (E&W).Shows black through ceiling perforations.

Acoustic cavity closer with tissue faced rockfibre slab laminated to black polyethylene DPC.

Mayplas SD10 Foam is designed for use as a resilient layer under cement sand screeds in concrete base with floating layer constructions.Benefits:Helps reduce impact sound.Wide 1500 mm roll for less jointing.