NBS Source
Olen tuotetoimittaja

Bauderflex Warm Roof System - Torch Applied

Valmistajan varmentama 1 kuukausi sitten

Bauder Ltd Tuotesertifikaatit:
  • EPD

    EPD

    Sertifikaatin tyyppi

  • BBA Agrément Certificate

    BBA Agrément Certificate

    Sertifikaatin tyyppi

  • CCPI System

    CCPI System

    Sertifikaatin tyyppi

  • EPD

    EPD

    Sertifikaatin tyyppi

  • EPD

    EPD

    Sertifikaatin tyyppi

Two-layer, torch-applied, warm roof, bitumen membrane waterproofing system suitable for new build and refurbishment. Option of using a root-resistant capping sheet for green roof scenarios.

Siirry kohtaan:
BOS
+44 (0)1473 257671 Verkkosivu

Käyttötarkoitus

Suitable for new build and refurbishment applications. For green roof situations, see Bauderflex Green.

Kuvaus

Two-layer, torch-applied, warm roof, bitumen membrane waterproofing system incorporating torch-on bitumen capping sheet with torch-applied bitumen underlayer, insulation and torch-applied bitumen air and vapour control layer (AVCL). Suitable for both new build and refurbishment applications. For green roof situations, see Bauderflex Green.

 

Plus Points:

  • Option of using a root-resistant capping sheet for green roof scenarios.
  • 4.2 mm SBS-modified elastomeric bitumen cap sheet with polyester fleece reinforcement.
  • Range of guarantee packages to fulfil cover requirements for project (dependant of system/product selection). For more information contact Bauder's technical department for a sample guarantee outlining cover level, terms and conditions.
  • Standards: BS EN 13707 Reinforced Bitumen Membrane Sheets for Roof Waterproofing.

Assessments and verifications:

  • CCPI Assessment 0007700012/1227: This systems CCPI mark provides accuracy of data delivering assurance to specifiers.
  • BBA Certificate 10/4744.
  • Fire classification BROOF(t4) to BS EN 13501-5 tested to TS 1187 test 4 for external fire exposure on defined permutations of product build up
    • Fire properties – membranes deemed “unrestricted” in certain circumstances as categorized in the BBA certificate.
  • Service life >30 years as stated in BBA certificate.
  • EPD Certification on system components:
    • Bitumen membranes.
    • BauderROCK insulation.
    • BauderGLAS insulation.

Yleistiedot

Väri

Grey

Brown

Viimeistely

Mineral

Materiaali

Bitumen

Ohjeistus valinnaisen ominaisuuden määrittelyyn:

Elastomer modified bitumen membrane.

Muoto

Square

Rectangle

Pituus

Bespoke

Leveys

Bespoke

Takuun kuvaus

-

Valmistajan ohjeistus

Guarantee options could include ‘Product’, ‘Product and Workmanship’ and ‘Product, Workmanship and Design’ guarantees.

All guarantees available for this system are subject to the works being carried out in accordance with the Bauder specification and being installed by a Bauder Approved installer.

For full details and further information regarding guarantees and alternative systems please contact a local Bauder Representative or technical@bauder.co.uk.

Uniclass

Ss_30_40_30_72 Reinforced bitumen membrane warm roof covering systemsEnsisijainen

CAWS

J41/10 Reinforced bitumen membrane warm deck roof covering

J41/110 Built-up reinforced bitumen membrane warm deck roof covering

Product range

Built-Up Bituminous Systems

Erittelytiedot - Reinforced bitumen membrane warm roof covering systems

Luokittelutiedot

Preparation

-

Horizontal work

Bauder Quick Dry Bitumen Primer.

Ohje vaihtoehtoiseen määritykseen:

A bitumen-based primer applied by a roller or brush. ‘Quick Dry’ is in comparison to standard bitumen primers. Specially formulated to increase the bond strength of Bauder torch-on bitumen membranes and Bauder Hot Melt waterproofing.

  • Coverage: 4-8 L/m² (depending on substrate porosity).
  • Application temperature: +5 to +25°C. Where the temperature falls outside of this, refer to Summer & Winter Advice documents from Bauder.
  • Drying time: 3-6 hours depending on porosity and weather conditions.
  • Colour: black.
  • Recoat time: four hours (if left exposed).
  • Suitable substrates: concrete; lightweight concrete or cementitious materials; metal; brick.
  • Non-suitable substrates: oriented strand board (OSB); plywood; timber; metal; Bauder self-adhesive underlayers; existing asphalt and bitumen membranes; polyisocyanurate (PIR) insulation.

Valmistajan ohjeistus

Contact manufacturer to confirm substrate suitability if required.

Skirtings and vertical work

As 'Horizontal work'.

Air and vapour control layer

-

Type

Bauder EVA 35.

Ohje vaihtoehtoiseen määritykseen:

Torch-applied, styrene-butadiene-styrene (SBS) elastomeric bitumen air and vapour control layer, featuring a tear-resistant aluminium foil lining for vapour impermeability. Once installed, the product provides a temporary waterproofing layer, allowing internal works to be carried out immediately.

  • Width: 1 m.
  • Length: 8 m.
  • Thickness: 3.5 mm.
  • Weight: 4.5 kg/m².
  • Reinforcement: polyester-coated aluminium foil and 60 g/m² glass fleece.
  • Tensile strength: ≥400 N/50mm (length and diagonal).
  • Heat stability: +70°C.
  • Cold bending test: -15°C.
  • Elongation at break: ≥2% (length and diagonal).

Attachment

Torch applied.

Insulation

-

Type

BauderGLAS Flatboard.

Ohje vaihtoehtoiseen määritykseen:

Insert required thickness.

 

Can only be used with PU Insulation Adhesive – Tin (with ‘water-overmist’) or PU Insulation Adhesive – twin cartridge.

Suitable for projects that require a high level of compressive strength and/ or to be non-combustible.

  • Type: cellular glass flatboard insulation board.
  • Facing: glass tissue or none-faced (depending upon system).
  • Density: 100 kg/m³.
  • Board size: contact manufacturer for options.
  • Thickness (flatboard): 50 mm, 60 mm, 70 mm, 80 mm, 90 mm, 100 mm, 110 mm, 120 mm, 130 mm, 140 mm, 150 mm, 160 mm, 170 mm, 180 mm, 190 mm, 200 mm. Also available in tapered.
  • Thermal conductivity: 0.036 W/m·K (may vary, dependent on thickness specified).
  • Compressive strength: 0.5 N/mm².

BauderGLAS Tapered.

Ohje vaihtoehtoiseen määritykseen:

Insert required thickness.

 

Can only be used with PU Insulation Adhesive – Tin (with ‘water-overmist’) or PU Insulation Adhesive – twin cartridge.

Suitable for projects that require a high level of compressive strength and/ or to be non-combustible.

  • Type: cellular glass tapered insulation board.
  • Facing: glass tissue or none-faced (depending upon system).
  • Density: 100 kg/m³.
  • Board size: Contact manufacturer for options.
  • Thickness (tapered): 50 mm, 60 mm, 70 mm, 80 mm, 90 mm, 100 mm, 110 mm, 120 mm, 130 mm, 140 mm, 150 mm, 160 mm, 170 mm, 180 mm, 190 mm, 200 mm. Also available in flatboard.
  • Thermal conductivity: 0.036 W/m·K (may vary, dependent on thickness specified).
  • Compressive strength: 0.5 N/mm².

BauderROCK Flatboard.

Ohje vaihtoehtoiseen määritykseen:

Insert required thickness.

 

Can only be used with PU Insulation Adhesive – Tin (with ‘water-overmist’) or PU Insulation Adhesive – twin cartridge or mechanically fixed.

Mineral fibre insulation, suitable for projects that require a high level of sound reduction and/ or to be non-combustible.

  • Type: dual-density mineral wool flatboard.
  • Facing, top: 300 g/m² glass fibre fleece; bottom: unfaced.
  • Density: 160 kg/m³.
  • Board size: 1200 x 1000 mm.
  • Board thickness (flatboard): 60 mm, 85 mm, 105 mm, 115 mm, 150 mm, 185 mm. Also available in tapered.
  • Thermal conductivity: 0.039 W/m·K (may vary, dependent on thickness specified).
  • Compressive strength: >0.12 N/mm² (minimum 0.08 N/mm²).

BauderROCK Tapered.

Ohje vaihtoehtoiseen määritykseen:

Insert required thickness.

 

Can only be used with PU Insulation Adhesive – Tin (with ‘water-overmist’) or PU Insulation Adhesive – twin cartridge or mechanically fixed.

Mineral fibre insulation, suitable for projects that require a high level of sound reduction and/ or to be non-combustible.

  • Type: Tapered insulation board.
  • Facing: Top: 300 g/m² glass fibre fleece; bottom: unfaced.
  • Density: 160 kg/m³.
  • Board size: 1200 x 1000 mm.
  • Board thickness (tapered): 60 mm, 85 mm, 105 mm, 115 mm, 150 mm, 185 mm. Also available in flatboard.
  • Thermal conductivity: 0.039 W/m·K (may vary, dependent on thickness specified).
  • Compressive strength: >0.12 N/mm² (minimum 0.08 N/mm²).

Fixing

PU Insulation Adhesive – Tin.

Ohje vaihtoehtoiseen määritykseen:

For BauderROCK and BauderGLAS insulation boards, when using Bauder PU Insulation Adhesive - Tin, a ‘water-overmist’ must be applied.

Not for foil to foil applications (e.g. FA-TE to FA-TE).

Activator-Primer (Canister), APR01-Black.

Ohje vaihtoehtoiseen määritykseen:

Not for use with BauderROCK or BauderGLAS insulations. 

Waterproof covering

-

First layer

-

Type

Bauder EGV 35 TF.

Ohje vaihtoehtoiseen määritykseen:

A 3.5 mm-thick, torch-applied elastomeric bitumen underlayer with glass fibre reinforcement.

  • Width: 1 m.
  • Length: 8 m.
  • Thickness: 3.5 mm.
  • Surface finish, top: mica; bottom: thermofusible polyethylene.
  • Weight: 4.7 kg/m².
  • Reinforcement: 100 g/m² glass lattice.
  • Tensile strength: ≥500 N/50mm (length and diagonal).
  • Heat stability: +100°C.
  • Cold bending test: -10°C.
  • Elongation at break: ≥2% (length and diagonal).

Attachment

Torch applied.

Top layer

-

Type

Bauder PYE PV 200 S4.

Ohje vaihtoehtoiseen määritykseen:

Torch-applied, elastomeric bitumen, mica-finished capping sheet, 4.2 mm-thick. Features a spun-bound polyester reinforcement to allow the finished product to cope with structural movement without fracture. Its mica finish means that it has no integrated UV protection, therefore is only suitable for applications where it will be covered with hard landscaping, such as pavers or promenade tiles.

  • Width: 1 m.
  • Length: 10 m.
  • Thickness: 4.2 mm.
  • Weight: 5 kg/m².
  • Surface, top: mica; bottom: thermofusible polyethylene.
  • Reinforcement: 250 g/m² recycled, spun-bound polyester.
  • Cold bending test: -25°C.
  • Softening point: >100°C.
  • Tensile strength: length >800 N/50mm; transverse >800 N/50mm.
  • Elongation at break: length >35%; transverse >35%.

BauderFLEX K4E, Brown.

Ohje vaihtoehtoiseen määritykseen:

Elastomer bitumen torch-on capping sheet. The product features a spunbond polyester reinforcement to allow the finished product to cope with structural movement without fracture, and a mineral finish to provide protection against UV degradation. Product has been fire tested as part of a system assembly and this information can be obtained in the Fire Test Report available from Bauder Ltd.

  • Width: 1 m.
  • Length: 7.5 m.
  • Thickness: 4.2 mm.
  • Weight: 5 kg/m².
  • Surface, top: mineral chippings.
  • Reinforcement: 250 g/m² spun-bound polyester.
  • Cold bending test: -30°C.
  • Softening point: >110°C.
  • Tensile strength: length >800 N/50mm; transverse >800 N/50mm.
  • Elongation at break: length >40%; transverse >40%.

BauderFLEX K4E, Charcoal Grey.

Ohje vaihtoehtoiseen määritykseen:

Elastomer bitumen torch-on capping sheet. The product features a spunbond polyester reinforcement to allow the finished product to cope with structural movement without fracture, and a mineral finish to provide protection against UV degradation. Product has been fire tested as part of a system assembly and this information can be obtained in the Fire Test Report available from Bauder Ltd.

  • Width: 1 m.
  • Length: 7.5 m.
  • Thickness: 4.2 mm.
  • Weight: 5.5 kg/m².
  • Surface, top: mineral chippings.
  • Reinforcement: 250 g/m² spun-bound polyester.
  • Cold bending test: -30°C.
  • Softening point: >110°C.
  • Tensile strength: length >800 N/50mm; transverse >800 N/50mm.
  • Elongation at break: length >40%; transverse >40%.

Valmistajan ohjeistus

Not for use with green roof systems.

Attachment

Torch applied.

Detail work

-

Flashings

Bauder GRP Trim.

Ohje vaihtoehtoiseen määritykseen:

GRP roof edge trim for use with Bauder bituminous roof systems. Available colours of either grey or black and a choice of profiles to suit the requirements of most projects.

Bauder GRP Water Check Trim.

Ohje vaihtoehtoiseen määritykseen:

GRP water check trim to be used on parapets and perimeter kerbs wider than 200 mm – must not be used on its own as a check kerb. Available in black only.

Bauder Aluminium Termination Bar.

Ohje vaihtoehtoiseen määritykseen:

Natural finish aluminium alternative to a lead counterflashing for use at upstand details to give protection to the top edge of the waterproofing. It should be restricted to use on upstands where a chase cannot be cut into the wall.

Bauder GRP Termination Bar.

Ohje vaihtoehtoiseen määritykseen:

Black glass-reinforced plastic (GRP) alternative to a lead counterflashing for use at upstand details to give protection to the top edge of the waterproofing. It should be restricted to use on upstands where a chase cannot be cut into the wall.

Skirtings and upstands

Not required.
Bauder LiquiFIBRE Detailing Kit.

Ohje vaihtoehtoiseen määritykseen:

Fast-curing waterproofing resin, containing fibre reinforcement that can be used for detailing awkward shapes or inaccessible areas where using LiquiDETAIL is impractical. PMMA-based resin that requires a catalyst and is solvent-free, isocyanate-free and halogen-free.

Bauder LiquiDETAIL.

Ohje vaihtoehtoiseen määritykseen:

Cold liquid-applied fast-curing waterproofing resin that can be used on upstands and details. PMMA-based resin that requires the addition of catalyst to trigger curing and is solvent-free, isocyanate-free and halogen-free.

Welted drips

Not required.
To perimeter kerbs.
To both external gutter edge and perimeter kerbs.
To Mansard roof perimeter.
To external gutter edge.

Ancillary items

Required.

Ohje vaihtoehtoiseen määritykseen:

Insert requirements.

Not required.

Surface protection

Not required.
BauderGREEN FSM 600 protection layer.

Ohje vaihtoehtoiseen määritykseen:

Laid on the completed waterproofing to protect the completed waterproofing from mechanical damage. Must be used with decorative ballast finishes.

System accessories

BauderSOLAR F XL Photovoltaic Mounting System.

Ohje vaihtoehtoiseen määritykseen:

Bauder flat roof PV mounting solution for framed solar modules. The mounting units are secured to the roof using a membrane-to-membrane welding technique. This installation method means that the roof is not compromised by penetrations for fixings, nor is it ballasted, which would add additional weight loading to the roof.

Specifically designed to be installed on Bauder bituminous or single-ply waterproofing systems and provide a lightweight, low-risk and quick-to-install mounting solution for framed solar modules.

Not required.
Bauder lightning conductors.

Ohje vaihtoehtoiseen määritykseen:

Lightning conductor clips are a specially designed secure clip that allows for movement.

  • Bauder Lightning conductor – Type 4: Polyvinyl chloride (PVC) coated or bare conductor.

Bauder rooflights/ glazing/ ventilation.

Ohje vaihtoehtoiseen määritykseen:

All these glazing products are fully compatible with the roof waterproofing systems. Consult manufacturer for details and insert requirements.

  • BauderDOME Rooflight.
  • Bauder Euroglaze Rooflight.
  • Bauder Special Modular Rooflight.
  • Bauder Continuous Rooflight.
  • Bauder Walk-on Rooflight.
  • Bauder Direct Glazing.
  • Bauder AOV.
  • Bauder Modular Link Glazing.
  • Bauder Structural Rooflight.
  • Bauder Fire Rated Rooflight.
  • BauderFLATGLASS Rooflights.

Bauder Bitumen Compact Vertical Outlet DN100.

Ohje vaihtoehtoiseen määritykseen:

Insulated internal outlet.

Bauder Bitumen Vertical Outlet DN70.

Ohje vaihtoehtoiseen määritykseen:

Insulated internal outlet.

Bauder Bitumen Vertical Outlet DN150.

Ohje vaihtoehtoiseen määritykseen:

Insulated internal outlet.

Bauder Bitumen Letterbox Parapet Outlet DN 205 including stainless-steel leaf guard.

Ohje vaihtoehtoiseen määritykseen:

For use with warm roof upstands only on an inverted warm roof system.

Bauder Bitumen Vertical Refurb Outlet DN70.

Ohje vaihtoehtoiseen määritykseen:

Designed to ensure the maximum flow rate of the existing downpipe is not exceeded.

Bauder Bitumen Vertical Refurb Outlet DN95.

Ohje vaihtoehtoiseen määritykseen:

Designed to ensure the maximum flow rate of the existing downpipe is not exceeded.

Bauder Bitumen Vertical Refurb Outlet DN145.

Ohje vaihtoehtoiseen määritykseen:

Designed to ensure the maximum flow rate of the existing downpipe is not exceeded.

Bauder Bitumen Parapet ‘Tell-Tale’ Overflow DN50.

Ohje vaihtoehtoiseen määritykseen:

Designed to be used in conjunction with other roof drainage outlets to ensure that there is no water ingress into the build and that the structural load of the roof is not exceeded and provides a visible warning that the roof is holding excessive water.

Bauder Insulated Parapet Outlet DN100, including pre-assembled pipe and dome grate.

Surfacing layer

Not required.
BauderGREEN PED DPH UK slope correcting pedestals for supported paving.

Ohje vaihtoehtoiseen määritykseen:

Fully-adjustable pedestal with slope corrector, achieves depths from 17–1070 mm.

BauderGREEN PED PB UK adjustable pedestals for supported paving.

Ohje vaihtoehtoiseen määritykseen:

Adjustable pedestal, achieves depths from 18–955 mm.

BauderGREEN PED NC UK non-combustible pedestals for supported paving.

Ohje vaihtoehtoiseen määritykseen:

All-metal, non-combustible, with integrated slope corrector, achieves depths from 42–282 mm.

BauderGREEN PED DPH UK slope correcting pedestals for supported decking.

Ohje vaihtoehtoiseen määritykseen:

Fully-adjustable pedestal with slope corrector and available kit support for joist battens, achieves depths from 17–1070 mm.

BauderGREEN PED PB UK adjustable pedestals for supported decking.

Ohje vaihtoehtoiseen määritykseen:

Bauder Adjustable (PB) Pedestal: adjustable pedestal with available joist holder accessory for decking, achieves depths from 18–955 mm.

BauderGREEN PED NC UK non-combustible pedestals for supported decking.

Ohje vaihtoehtoiseen määritykseen:

Bauder Non-Combustible (NC) Pedestal: all-metal, non-combustible, with integrated slope corrector and non-combustible Bauder Ali-Rail for decking, achieves depths from 42–282 mm.

Ballast (by others).

Ohje vaihtoehtoiseen määritykseen:

Minimum depth: 50 mm of 20–40mm rounded washed pebbles.

Kestävyystiedot

Selkeys vähähiiliseen suunnitteluun

NBS LCA auttaa rakennusalan ammattilaisia mittaamaan ympäristövaikutuksia ja löytämään vähähiilisiä tuotteita kestävämpiin projekteihin.

Tutustu NBS LCA:han
LCA-havainnollistus

Materiaali

Bitumen

Ohje vaihtoehtoiseen määritykseen:

Elastomer modified bitumen membrane.

Tuotesertifikaatit

BIM-objektit

BOS

NBS BIM-objektistandardi

Tämä BIM-objekti on tuotettu täyttämään NBS BIM-objektistandardin vaatimukset.

Lue lisää NBS BIM-objektistandardista.

AlustaYhteensopivaVersio
Revit
-

3

IFC
-

1

Tuotesertifikaatit

EPD

EPD

Environmental Product Declaration - RBM

BBA Agrément Certificate

BBA Agrément Certificate

Certificate: Bauderflex Systems 10/4744

CCPI System

Bauder Bauderflex-BauderflexGreen-CCPI

EPD

EPD

Environmental Product Declaration - Rockwool

EPD

EPD

Environmental Product Declaration - FOAMGLAS - EPD-PCE-20200300-IBB1-EN

Dokumentit

Bauder Bitumen Compact Vertical Outlet DN 100

Bauder Bitumen Compact Vertical Outlet DN 100

Bauder Quick Dry Bitumen Primer - Technical Data Sheet

Bauder Quick Dry Bitumen Primer - Technical Data Sheet

Bauder EVA 35 Air and Vapour Control Layer

Bauder EVA 35 Air and Vapour Control Layer

BauderFLEX K4E Roofing membrane (Brown)

BauderFLEX K4E Roofing membrane (Brown)

BauderFLEX K4E Roofing membrane (Charcoal grey)

BauderFLEX K4E Roofing membrane (Charcoal grey)

Bauder GRP Trim & GRP Watercheck Trim

Bauder GRP Trim & GRP Watercheck Trim

BauderSOLAR F XL - Technical Data Sheet

BauderSOLAR F XL - Technical Data Sheet

Bauder Bitumen Letterbox Parapet Outlet DN 205 including ss leaf guard

Bauder Bitumen Letterbox Parapet Outlet DN 205 including ss leaf guard

Bauder EGV 35 TF Underlayer - Technical Data Sheet

Bauder EGV 35 TF Underlayer - Technical Data Sheet

BauderFLEX TA 600 Isolating / Nailing Layer - Technical Data Sheet

BauderFLEX TA 600 Isolating / Nailing Layer - Technical Data Sheet

BauderGLAS Ready Board T3+ - Technical Data Sheet

BauderGLAS Ready Board T3+ - Technical Data Sheet

BauderGLAS Ready T3+ - Technical Data Sheet

BauderGLAS Ready T3+ - Technical Data Sheet

BauderGLAS Slab T3+ - Technical Data Sheet

BauderGLAS Slab T3+ - Technical Data Sheet

BauderGLAS Tapered Ready T3+ - Technical Data Sheet

BauderGLAS Tapered Ready T3+ - Technical Data Sheet

Bauder LiquiDETAIL

Bauder LiquiDETAIL

Bauder Parapet Emergency Overflow Stainless Steel DN 70 - Technical Data Sheet

Bauder Parapet Emergency Overflow Stainless Steel DN 70 - Technical Data Sheet

Bauder PU Insulation Adhesive - Tin

Bauder PU Insulation Adhesive - Tin

BauderROCK Flatboard Insulation

BauderROCK Flatboard Insulation

BauderROCK Tapered Insulation

BauderROCK Tapered Insulation

Bauder waterproofing systems are now CCPI verified.

Bauder waterproofing systems are now CCPI verified.

New Build Flat Roof Solutions - Bauder brochure

New Build Flat Roof Solutions - Bauder brochure

Refurbishment Flat Roof Solutions - Bauder brochure

Refurbishment Flat Roof Solutions - Bauder brochure

Reinforced Bitumen Membrane Systems - Bauder brochure

Reinforced Bitumen Membrane Systems - Bauder brochure

BauderTEC KSD FBS Air and Vapour Control Layer - Technical Data Sheet

BauderTEC KSD FBS Air and Vapour Control Layer - Technical Data Sheet

Bauder Activator-Primer (Canister) APR01 - black

Bauder Activator-Primer (Canister) APR01 - black

Bauder Lightning Conductor Clips - Technical Data Sheet

Bauder Lightning Conductor Clips - Technical Data Sheet

Samankaltaiset tuotteet valmistajalta Bauder Ltd

Bauder System Airtech Warm Roof System - Self Adhered

Bauder System Airtech Warm Roof System - Self Adhered

Bauder Total Green Roof System PLUS Reinforced Bitumen Membrane Warm Roof Covering System Self-Adhered (with Torch-On Capping Sheet)

Bauder Total Green Roof System PLUS Reinforced Bitumen Membrane Warm Roof Covering System Self-Adhered (with Torch-On Capping Sheet)

Bauder Total Green Roof System Reinforced Bitumen Membrane Warm Roof Covering System - Torch Applied

Bauder Total Green Roof System Reinforced Bitumen Membrane Warm Roof Covering System - Torch Applied

Bauder Total Green Roof System Reinforced Bitumen Membrane Warm Roof Covering System Self-Adhered (with Torch-On Capping Sheet)

Bauder Total Green Roof System Reinforced Bitumen Membrane Warm Roof Covering System Self-Adhered (with Torch-On Capping Sheet)

Bauder Total Warm Roof System - Self Adhered

Bauder Total Warm Roof System - Self Adhered

Bauder Total Warm Roof System - Torch Applied

Bauder Total Warm Roof System - Torch Applied

Bauder Total Warm Roof System PLUS - Self Adhered

Bauder Total Warm Roof System PLUS - Self Adhered

Bauderflex Green Warm Roof System - Self Adhered (with Torch-On Capping Sheet)

Bauderflex Green Warm Roof System - Self Adhered (with Torch-On Capping Sheet)

Bauderflex Warm Roof System - Self Adhered

Bauderflex Warm Roof System - Self Adhered