NBS Source
Olen tuotetoimittaja

Bauderflex Green Warm Roof System - Self Adhered (with Torch-On Capping Sheet)

Valmistajan varmentama 1 kuukausi sitten

Bauder Ltd Tuotesertifikaatit:
  • CCPI System

    CCPI System

    Sertifikaatin tyyppi

  • BBA Agrément Certificate

    BBA Agrément Certificate

    Sertifikaatin tyyppi

  • EPD

    EPD

    Sertifikaatin tyyppi

Two-layer, self-adhered, warm roof bitumen membrane waterproofing system suitable for new build and refurbishment applications, incorporating torch-on bitumen root resistant capping sheet.

Siirry kohtaan:
BOS
+44 (0)1473 257671 Verkkosivu

Käyttötarkoitus

Suitable for new build and refurbishment applications.

For non-green roof situations, see Bauderflex.

Kuvaus

Bauderflex Green warm roof system, incorporating torch-on bitumen root resistant capping sheet with self-adhered bitumen underlayer, insulation and self-adhered bitumen air and vapour control layer (AVCL).

Bauderflex Green Roof System is suitable for a variety of applications on both new build and refurbishment projects and can be used in warm, cold (waterproofing only) and inverted warm roof scenarios.

See BBA certification 10/4744. Bauderflex Green can meet current UK Building Regulations Part B for external fire protection.

 

Plus points:

  • 4.2 mm modified elastomeric bitumen cap sheet.
  • Polyester fleece reinforcement.
  • Safe2Torch design.
  • Range of guarantee packages to fulfil cover requirements for the project (dependent on system/ product selection). For more information contact Bauder's technical department for a sample guarantee outlining cover level, terms and conditions.
  • Standards: BS EN 13707 Reinforced Bitumen Membrane Sheets for Roof Waterproofing.

Verified properties:

  • CCPI Verification 0007700016/1227: This systems CCPI mark provides accuracy of data delivering assurance to specifiers.
  • BBA Certificate 10/4744.
  • Fire classification BROOF(t4) to BS EN 13501-5 tested to TS 1187 test 4 for external fire exposure on defined permutations of product build up.
  • Fire properties - membranes deemed "unrestricted" in certain circumstances as categorised in BBA Certificate.
  • Service life > 30 years as stated in BBA certificate.
  • EPD Certification on system components: Bitumen membranes, PU Insulation - Aluminium Facing, BauderROCK insulation, BauderGLAS Insulation.

Yleistiedot

Väri

Green

Ohjeistus valinnaisen ominaisuuden määrittelyyn:

Mineral finish is green.

Viimeistely

Mineral

Materiaali

Bitumen

Muoto

Square

Rectangle

Takuun kuvaus

-

Valmistajan ohjeistus

Guarantee options could include ‘Product’, ‘Product and Workmanship’ and ‘Product, Workmanship and Design’ guarantees.

All guarantees available for this system are subject to the works being carried out in accordance with the Bauder specification and being installed by a Bauder Approved installer.

For full details and further information regarding guarantees and alternative systems, consult manufacturer.

Uniclass

Ss_30_40_30_72 Reinforced bitumen membrane warm roof covering systemsEnsisijainen

CAWS

J41/110 Built-up reinforced bitumen membrane warm deck roof covering

J41/10 Reinforced bitumen membrane warm deck roof covering

Erittelytiedot - Reinforced bitumen membrane warm roof covering systems

Luokittelutiedot

Preparation

-

Horizontal work

Activator-Primer (Canister) APR01 – Black.

Ohje vaihtoehtoiseen määritykseen:

Synthetic rubber resin-based primer, developed to provide the necessary preparation of substrates prior to the installation of self-adhesive and torch-applied membranes. The spray application offers improved film thickness speed of application (by up to 50% over roller applied products) and quick drying in a matter of minutes. (Not for use with concrete)

  • Coverage: Approx. 96 g/m² (300 mm wide spray one coat, 192 g/m² two coats). Two coats may be required for very porous substrates.
  • Application temperature: +5 to +30°C.
  • Drying time (at 10°C): 5–10 minutes.
  • Colour: Black.
  • Recoat time if left exposed: Four hours.
  • Suitable substrates: Oriented strand board (OSB); plywood; timber; metal; Bauder self-adhesive underlayers; existing asphalt and bitumen membranes; polyisocyanurate (PIR) insulation.
  • Non-suitable substrates: Concrete decks (new & refurb), Mica finished surfaces (e.g. KSD FBS); Laminated paper-foil faced insulation; expanded polystyrene (EPS) or extruded polystyrene (XPS) insulations; for bonding BauderROCK or mineral wool insulation; for bonding BauderGLAS or cellular glass insulation; copper; thermoplastic waterproofing membranes. 


SA Bonding Primer.

Ohje vaihtoehtoiseen määritykseen:

For Self-Adhesive membranes to Concrete.

Bauder SA Bonding Primer is a synthetic rubber-based primer applied by a roller or brush. Specially formulated to increase the bond strength of Bauder self-adhesive bitumen membranes to a wide range of substrates, including timber, concrete, brick, metal and most plastics.

  • Coverage: Approx. 200-300 g/m² (depending on substrate porosity).
  • Application temperature: +5 to +30°C.
  • Drying time: Approx.30 mins, dependent upon ambient temperature and material porosity.
  • Colour: Black.
  • Recoat time if left exposed: Four hours.
  • Suitable substrates: timber, concrete, brick, metal and most plastics.

Valmistajan ohjeistus

Contact Bauder to confirm substrate suitability if required.

Skirtings and vertical work

As 'Horizontal work'.

Air and vapour control layer

-

Type

BauderTEC KSD FBS.

Ohje vaihtoehtoiseen määritykseen:

Self-adhesive elastomeric bitumen air and vapour control layer (AVCL), with a mica finished upper surface. One side lap features an 80 mm wide glass fleece along the underside, and a 100 mm strip of aluminium foil above. The other side lap has a thermofusible film on the top surface. This arrangement ensures that laps are heat sealed using hot air or gas torch as appropriate to extrude a bitumen bead, thus ensuring waterproofing integrity.

  • Width: 1.08 m.
  • Length: 10 m.
  • Thickness: 2.5 mm.
  • Weight: 2.5 kg/m².
  • Reinforcement: Polyester coated aluminium foil and 200 g/m² glass fleece.
  • Tensile strength: Length and Diagonal ≥ 1000 N/50mm.
  • Cold bending test: -25°C.
  • Elongation at break: Length and Diagonal ≥ 2%.

BauderTHERM DS 1 DUO.

Ohje vaihtoehtoiseen määritykseen:

Self-adhesive elastomeric bitumen air and vapour control layer with patented “DUO” lap technology to ensure thorough sealing of lap joints, even in lower temperatures. The product also features thermally activated bitumen stripes on its top surface to provide the bonding compound for the insulation boards.

  • Width: 1.08 m.
  • Length: 7.5 m.
  • Thickness: 3.5 mm.
  • Weight: 4.5 kg/m².
  • Reinforcement: Polyester coated aluminium foil and 60 g/m² glass fleece.
  • Tensile strength: Length ≥400 N/50mm and Diagonal ≥ 300 N/50mm.
  • Cold bending test: -25°C.
  • Elongation at break: Length and Diagonal ≥ 2%.

Attachment

Self-adhesive.

Insulation

-

Type

BauderGLAS Flatboard.

Ohje vaihtoehtoiseen määritykseen:

Insert required thickness.

 

Can only be used with PU Insulation Adhesive – Tin (with ‘water-overmist’) or PU Insulation Adhesive – Twin cartridge.

Cellular glass insulation suitable for projects that require a high level of compressive strength and/ or to be non-combustible.

  • Type: Cellular glass flatboard insulation board.
  • Facing: Glass tissue or unfaced (depending upon system).
  • Density: 100 kg/m³.
  • Board size: Contact manufacturer for options.
  • Thickness (Flatboard): 50 mm, 60 mm, 70 mm, 80 mm, 90 mm, 100 mm, 110 mm, 120 mm, 130 mm, 140 mm, 150 mm, 160 mm, 170 mm, 180 mm, 190 mm, 200 mm (also available in Tapered).
  • Thermal conductivity: 0.036 W/m·K (may vary dependent on thickness specified).
  • Compressive strength: 0.5 N/mm².


BauderGLAS Tapered.

Ohje vaihtoehtoiseen määritykseen:

Insert required thickness.

 

Can only be used with PU Insulation Adhesive – Tin (with ‘water-overmist’) or PU Insulation Adhesive – Twin cartridge.

Cellular glass insulation suitable for projects that require a high level of compressive strength and/ or to be non-combustible.

  • Type: Cellular glass tapered insulation board.
  • Facing: Glass tissue or unfaced (depending upon system).
  • Density: 100 kg/m³.
  • Board size: Contact manufacturer for options.
  • Thickness (Tapered): 50 mm, 60 mm, 70 mm, 80 mm, 90 mm, 100 mm, 110 mm, 120 mm, 130 mm, 140 mm, 150 mm, 160 mm, 170 mm, 180 mm, 190 mm, 200 mm.
  • Thermal conductivity: 0.036 W/m·K (may vary dependent on thickness specified).
  • Compressive strength: 0.5 N/mm².

BauderROCK Flatboard.

Ohje vaihtoehtoiseen määritykseen:

Insert required thickness.

 

Can only be used with PU Insulation Adhesive – Tin (with ‘water-overmist’) or PU Insulation Adhesive – Twin cartridge or mechanically fixed.

Mineral fibre insulation suitable for projects that require a high level of sound reduction and/ or to be non-combustible.

  • Type: Dual density mineral wool flatboard insulation board.
  • Facing: Top: 300 g/m² glass fibre fleece; Bottom: Unfaced.
  • Density: 160 kg/m³.
  • Board size: 1200 x 1000 mm.
  • Board thickness (Flatboard): 60 mm, 85 mm, 105 mm, 115 mm, 150 mm, 185 mm (also available in Tapered).
  • Thermal conductivity: 0.039 W/m·K (may vary dependent on thickness specified).
  • Compressive strength: >0.12 N/mm² (minimum 0.08 N/mm²).

BauderROCK Tapered.

Ohje vaihtoehtoiseen määritykseen:

Insert required thickness.

 

Can only be used with PU Insulation Adhesive – Tin (with ‘water-overmist’) or PU Insulation Adhesive – Twin cartridge or mechanically fixed.

Mineral fibre insulation suitable for projects that require a high level of sound reduction and/ or to be non-combustible.

  • Type: Dual density mineral wool tapered insulation board.
  • Facing: Top: 300 g/m² glass fibre fleece; Bottom: Unfaced.
  • Density: 160 kg/m³.
  • Board size: 1200 x 1000 mm.
  • Board thickness (Tapered): 60 mm, 85 mm, 105 mm, 115 mm, 150 mm, 185 mm.
  • Thermal conductivity: 0.039 W/m·K (may vary dependent on thickness specified).
  • Compressive strength: >0.12 N/mm² (minimum 0.08 N/mm²).

BauderVIP TE 60 mm Flatboard.

Ohje vaihtoehtoiseen määritykseen:

  • Type: Vacuum insulation panel with pyrogenic silica vacuum core, 40 mm.
  • Facing: Top: High density PIR, 17 mm; Bottom: Rubber granulate, 3 mm.
  • Density: 13 kg/m².
  • Standard board sizes: 1000 x 1000 mm and 1000 x 500 mm.
  • Standard board thickness: 60 mm.
  • Thermal conductivity: 0.009 W/m·K.
  • Compressive strength: >0.12 N/mm².


BaduerVIP TE 80 mm Flatboard.

Ohje vaihtoehtoiseen määritykseen:

  • Type: Vacuum insulation panel with pyrogenic silica vacuum core, 60 mm.
  • Facing: Top: High density PIR, 17 mm; Bottom: Rubber granulate, 3 mm.
  • Density: 17 kg/m².
  • Board sizes: 1000 x 1000 mm, 1000 x 500 mm.
  • Board thickness: 80 mm.
  • Thermal Conductivity: 0.009 W/m·K.
  • Compressive strength: >0.12 N/mm².


PIR FA G16 foil-faced tapered insulation.

Ohje vaihtoehtoiseen määritykseen:

Insert required thickness.

  • Type: Rigid closed-cell polyisocyanurate (PIR) roofboard: To BS EN 13165.
  • Facing: Black aluminium foil to both faces.
  • Density: >30 kg/m³.
  • Standard board size: 1200 x 1200 mm.
  • Board thickness: Contact manufacturer for options.
  • Thermal conductivity: 0.022 W/m·K (may vary dependent on thickness specified).
  • Compressive strength: >0.12 N/mm².
  • PIR index: >250 (extremely high dimensional stability).


PIR FA-TE Flatboard.

Ohje vaihtoehtoiseen määritykseen:

Insert required thickness.

  • Type: Rigid closed-cell polyisocyanurate (PIR) roofboard: To BS EN 13165.
  • Facing: Aluminium foil to both faces.
  • Density: >30 kg/m³.
  • Standard board size: 1200 x 600 mm.
  • Board thickness: 30 mm, 40 mm, 50 mm, 60 mm, 80 mm, 100 mm, 120 mm, 140 mm, 160 mm.
  • Thermal conductivity: 0.022 W/m·K (may vary dependent on thickness specified).
  • Compressive strength: >0.12 N/mm².
  • PIR index: >250 (extremely high dimensional stability).

Fixing

PU Insulation Adhesive – Tin.

Ohje vaihtoehtoiseen määritykseen:

Not for foil to foil applications (e.g. FA-TE to FA-TE).

Activator-Primer (Canister) APR01 – Black.

Ohje vaihtoehtoiseen määritykseen:

For foil to foil applications (e.g. FA-TE to FA-TE). Must be used to bond ridge/ valleys on FA G16 Tapered Schemes.

PU Insulation Adhesive – Twin cartridge.

Ohje vaihtoehtoiseen määritykseen:

For foil to foil applications (e.g. FA-TE to FA-TE).

Waterproof covering

-

First layer

-

Type

BauderTEC Sprint DUO.

Ohje vaihtoehtoiseen määritykseen:

Elastomer bitumen self-adhesive underlayer with variable technology for lap sealing. The two side laps of the membrane have differing finishes. On one lap there is a self-adhesive finish, whist the opposite lap has a glass fleece. This allows the membrane to be sealed with either a gas torch or hot air welder.

  • Width: 1 m.
  • Length: 15 m.
  • Thickness: 2 mm.
  • Weight: 2.5 kg/m².
  • Surface: Top: PE foil; Bottom: release film (cold self-adhesive bitumen underside)
  • Reinforcement: 200 g/m² glass lattice with glass fleece combination.
  • Cold bending test: Top -30°C; Bottom -30°C.
  • Softening point: >100°C.
  • Tensile strength: Length >1000 N/50mm; transverse >1000 N/50mm.
  • Elongation at break: Length >2%; transverse >2%.

Attachment

Self-adhered.

Top layer

-

Type

BauderPLANT E 42.

Ohje vaihtoehtoiseen määritykseen:

Elastomer-bitumen torch on capping sheet with root-resistance according to FLL. The product features a spunbond polyester reinforcement to allow the finished product to cope with structural movement without fracture.

  • Width: 1 m.
  • Length: 7.5 m.
  • Thickness: 4.2 mm.
  • Weight: 5 kg/m².
  • Surface: Top: Green slate mineral chippings; Bottom: Thermofusible polyethylene.
  • Reinforcement: 250 g/m² Polyester fleece.
  • Cold bending test: -36°C.
  • Softening point: >120°C.
  • Tensile strength: Length >1000 N/50 mm; transverse >1000 N/50mm.
  • Elongation at break: Length >45%; transverse >45%.

Attachment

Torch applied.

Detail work

-

Flashings

Not required.
Bauder GRP Trim.

Ohje vaihtoehtoiseen määritykseen:

GRP roof edge trim for use with Bauder bituminous roof systems. Available colours of either grey or black and a choice of profiles to suit the requirements of most projects.

Bauder GRP Water Check Trim.

Ohje vaihtoehtoiseen määritykseen:

GRP water check trim to be used on parapets and perimeter kerbs wider than 200 mm – must not be used on its own as a check kerb. Available in black only.

Bauder Aluminium Termination Bar.

Ohje vaihtoehtoiseen määritykseen:

Natural finish aluminium alternative to a lead counterflashing for use at upstand details to give protection to the top edge of the waterproofing. It should be restricted to use on upstands where a chase cannot be cut into the wall.

Bauder GRP Termination Bar.

Ohje vaihtoehtoiseen määritykseen:

Black glass reinforced plastic (GRP) alternative to a lead counterflashing for use at upstand details to give protection to the top edge of the waterproofing. It should be restricted to use on upstands where a chase cannot be cut into the wall.

Skirtings and upstands

Not required.
Bauder LiquiFIBRE Detailing Kit.

Ohje vaihtoehtoiseen määritykseen:

Fast curing waterproofing resin containing fibre reinforcement that can be used for detailing awkward shapes or inaccessible areas where using LiquiDETAIL is impractical. PMMA-based resin that requires a catalyst and is solvent, isocyanate and halogen free.

Bauder LiquiDETAIL.

Ohje vaihtoehtoiseen määritykseen:

Cold liquid applied fast curing waterproofing resin that can be used on upstands and details. PMMA-based resin that requires the addition of catalyst to trigger curing and is solvent, isocyanate and halogen free.

Welted drips

Not required.
To Mansard roof perimeter.
To both external gutter edge and perimeter kerbs.
To external gutter edge.
To perimeter kerbs.

Ancillary items

Required.

Ohje vaihtoehtoiseen määritykseen:

Insert requirements.

Not required.

System accessories

Not required.
Bauder lightning conductors.

Ohje vaihtoehtoiseen määritykseen:

Lightning conductor clips are a specially designed secure clip that allows for movement.

  • Bauder Lightning conductor – Type 4: Polyvinyl chloride (PVC) coated or bare conductor.

Bauder rooflights/ glazing/ ventilation.

Ohje vaihtoehtoiseen määritykseen:

All these glazing products are fully compatible with the roof waterproofing systems. Consult manufacturer for details and insert requirements.

  • BauderDOME Rooflight.
  • Bauder Euroglaze Rooflight.
  • Bauder Special Modular Rooflight.
  • Bauder Continuous Rooflight.
  • Bauder Walk-on Rooflight.
  • Bauder Direct Glazing.
  • Bauder AOV.
  • Bauder Modular Link Glazing.
  • Bauder Structural Rooflight.
  • Bauder Fire Rated Rooflight.
  • BauderFLATGLASS Rooflights.

Bauder Bitumen Compact Vertical Outlet DN100.

Ohje vaihtoehtoiseen määritykseen:

Insulated internal outlet.

Bauder Bitumen Vertical Outlet DN70.

Ohje vaihtoehtoiseen määritykseen:

Insulated internal outlet.

Bauder Bitumen Vertical Outlet DN150.

Ohje vaihtoehtoiseen määritykseen:

Insulated internal outlet.

Bauder Bitumen Letterbox Parapet Outlet DN 205 including stainless-steel leaf guard.

Ohje vaihtoehtoiseen määritykseen:

For use with warm roof upstands only on an inverted warm roof system.

Bauder Bitumen Vertical Refurb Outlet DN70.

Ohje vaihtoehtoiseen määritykseen:

Designed to ensure the maximum flow rate of the existing downpipe is not exceeded.

Bauder Bitumen Vertical Refurb Outlet DN95.

Ohje vaihtoehtoiseen määritykseen:

Designed to ensure the maximum flow rate of the existing downpipe is not exceeded.

Bauder Bitumen Vertical Refurb Outlet DN145.

Ohje vaihtoehtoiseen määritykseen:

Designed to ensure the maximum flow rate of the existing downpipe is not exceeded.

Bauder Bitumen Parapet ‘Tell-Tale’ Overflow DN50.

Ohje vaihtoehtoiseen määritykseen:

Designed to be used in conjunction with other roof drainage outlets to ensure that there is no water ingress into the build and that the structural load of the roof is not exceeded and provides a visible warning that the roof is holding excessive water.

Bauder Insulated Parapet Outlet DN100, including pre-assembled pipe and dome grate.

Surfacing layer

Not required.
Landscaping options.

Ohje vaihtoehtoiseen määritykseen:

Please refer to Bauder Extensive / Biodiverse / Intensive Landscaping systems.

Kestävyystiedot

Selkeys vähähiiliseen suunnitteluun

NBS LCA auttaa rakennusalan ammattilaisia mittaamaan ympäristövaikutuksia ja löytämään vähähiilisiä tuotteita kestävämpiin projekteihin.

Tutustu NBS LCA:han
LCA-havainnollistus

Materiaali

Bitumen

Tuotesertifikaatit

BIM-objektit

BOS

NBS BIM-objektistandardi

Tämä BIM-objekti on tuotettu täyttämään NBS BIM-objektistandardin vaatimukset.

Lue lisää NBS BIM-objektistandardista.

AlustaYhteensopivaVersio
Revit
-

1

IFC
-

1

Tuotesertifikaatit

CCPI System

Bauder Bauderflex-BauderflexGreen-CCPI

BBA Agrément Certificate

BBA Agrément Certificate

Certificate: Bauderflex Green Roof Systems 10/4744

EPD

EPD

Environmental Product Declaration - RBM

Dokumentit

Bauder Activator-Primer (Canister) APR01 - black

Bauder Activator-Primer (Canister) APR01 - black

Bauder SA Bonding Primer - Technical Data Sheet

Bauder SA Bonding Primer - Technical Data Sheet

BauderTEC KSD FBS Air and Vapour Control Layer - Technical Data Sheet

BauderTEC KSD FBS Air and Vapour Control Layer - Technical Data Sheet

BauderTHERM DS 1 DUO Air and Vapour Control Layer

BauderTHERM DS 1 DUO Air and Vapour Control Layer

BauderROCK Flatboard Insulation

BauderROCK Flatboard Insulation

BauderROCK Tapered Insulation

BauderROCK Tapered Insulation

BauderPIR FA G16 Tapered Insulation

BauderPIR FA G16 Tapered Insulation

BauderPIR FA-TE Flatboard Insulation

BauderPIR FA-TE Flatboard Insulation

BauderTEC Sprint DUO Underlayer - Technical Data Sheet

BauderTEC Sprint DUO Underlayer - Technical Data Sheet

BauderPLANT E 42 Root Resistant Roofing Capping Sheet

BauderPLANT E 42 Root Resistant Roofing Capping Sheet

Bauder LiquiFIBRE

Bauder LiquiFIBRE

Bauder LiquiDETAIL

Bauder LiquiDETAIL

BauderPIR VIP TE - Technical Data Sheet

BauderPIR VIP TE - Technical Data Sheet

BauderECO FF - Technical Data Sheet

BauderECO FF - Technical Data Sheet

Bauder EVA 35 Air and Vapour Control Layer

Bauder EVA 35 Air and Vapour Control Layer

BauderFLEX TA 600 Isolating / Nailing Layer - Technical Data Sheet

BauderFLEX TA 600 Isolating / Nailing Layer - Technical Data Sheet

BauderGLAS Angle Fillet - Technical Data Sheet

BauderGLAS Angle Fillet - Technical Data Sheet

Bauder GRP Trim & GRP Watercheck Trim

Bauder GRP Trim & GRP Watercheck Trim

Bauder Lightning Conductor Clips - Technical Data Sheet

Bauder Lightning Conductor Clips - Technical Data Sheet

Bauder LiquiPOCKET Detailing Kit - Technical Data Sheet

Bauder LiquiPOCKET Detailing Kit - Technical Data Sheet

Bauder Parapet Emergency Overflow Stainless Steel DN 70 - Technical Data Sheet

Bauder Parapet Emergency Overflow Stainless Steel DN 70 - Technical Data Sheet

BauderPIR GFS G16 Tapered Ridge Infill - Technical Data Sheet

BauderPIR GFS G16 Tapered Ridge Infill - Technical Data Sheet

BauderPIR KFS G16 Tapered Valley Infill - Technical Data Sheet

BauderPIR KFS G16 Tapered Valley Infill - Technical Data Sheet

BauderPIR M TKL 60 Angle fillets - Technical Data Sheet

BauderPIR M TKL 60 Angle fillets - Technical Data Sheet

BauderROCK Angle Fillets - Technical Data Sheet

BauderROCK Angle Fillets - Technical Data Sheet

Bauder Quick Dry Bitumen Primer - Technical Data Sheet

Bauder Quick Dry Bitumen Primer - Technical Data Sheet

Bauder waterproofing systems are now CCPI verified.

Bauder waterproofing systems are now CCPI verified.

Green Roof Systems - Bauder Brochure

Green Roof Systems - Bauder Brochure

New Build Flat Roof Solutions - Bauder brochure

New Build Flat Roof Solutions - Bauder brochure

Refurbishment Flat Roof Solutions - Bauder brochure

Refurbishment Flat Roof Solutions - Bauder brochure

Reinforced Bitumen Membrane Systems - Bauder brochure

Reinforced Bitumen Membrane Systems - Bauder brochure

Samankaltaiset tuotteet valmistajalta Bauder Ltd

Bauder System Airtech Warm Roof System - Self Adhered

Bauder System Airtech Warm Roof System - Self Adhered

Bauder Total Green Roof System PLUS Reinforced Bitumen Membrane Warm Roof Covering System Self-Adhered (with Torch-On Capping Sheet)

Bauder Total Green Roof System PLUS Reinforced Bitumen Membrane Warm Roof Covering System Self-Adhered (with Torch-On Capping Sheet)

Bauder Total Green Roof System Reinforced Bitumen Membrane Warm Roof Covering System - Torch Applied

Bauder Total Green Roof System Reinforced Bitumen Membrane Warm Roof Covering System - Torch Applied

Bauder Total Green Roof System Reinforced Bitumen Membrane Warm Roof Covering System Self-Adhered (with Torch-On Capping Sheet)

Bauder Total Green Roof System Reinforced Bitumen Membrane Warm Roof Covering System Self-Adhered (with Torch-On Capping Sheet)

Bauder Total Warm Roof System - Self Adhered

Bauder Total Warm Roof System - Self Adhered

Bauder Total Warm Roof System - Torch Applied

Bauder Total Warm Roof System - Torch Applied

Bauder Total Warm Roof System PLUS - Self Adhered

Bauder Total Warm Roof System PLUS - Self Adhered

Bauderflex Warm Roof System - Self Adhered

Bauderflex Warm Roof System - Self Adhered

Bauderflex Warm Roof System - Torch Applied

Bauderflex Warm Roof System - Torch Applied