Black
Valmistajan varmentama 4 kuukautta sitten
EPD
Sertifikaatin tyyppi
CCPI System
Sertifikaatin tyyppi
BBA Agrément Certificate
Sertifikaatin tyyppi
Hot melt rubberised bitumen formulated to provide a monolithic fully bonded roofing and waterproofing membrane.
Used as a fully bonded, monolithic waterproofing and roofing membrane on horizontal and vertical surfaces. Suitable for protected roof membrane assemblies, podium and terrace decks, planters, blue roofs, highway bridge decks, underground parking, ramps, railway bridge decks, parking decks, tunnels, reflective pools.
It is the primary waterproofing layer in the following conditions:
Must be protected by the appropriate access protection layer. Not intended for use as a permanently exposed surface without the appropriate protection layer, although will tolerate incidental foot traffic, light rubber wheeled traffic until surfacing / landscaping is installed.
Hot melt, rubberized bitumen cold roof coating system, suitable for a variety of applications on both new build and refurbishment projects and can be used in cold and inverted roof scenarios. Bakor 790-11 is composed of a blend of refined bitumens, synthetic rubber and mineral stabilizers whilst also containing post-consumer recycled content. It is modified with additives to promote adhesion and improve low temperature flexibility.
Bauder Hot Melt Waterproofing application areas include protected, inverted, or buried roofs such as green roofs, paved, terraces, podiums, plazas, and car parks. Bauder Hot Melt Waterproofing System can also be specified within Bauder Blue Roof and BioSOLAR situations.
The solution is primarily used for new build projects, but it can also be used in refurbishment situations that require an inverted warm roof solution.
Only for use in a full Bauder Hot Melt Waterproofing System.
Väri | Black |
Materiaali | Bitumen |
Muoto | Formless |
Korkeus | 6 mm Ohjeistus valinnaisen ominaisuuden määrittelyyn: Nominal thickness 3mm per single layer / total 6mm with fabric reinforcement (exc. protection layer) |
Takuun kuvaus | Valmistajan ohjeistusA comprehensive range of guarantee options are available. Please contact your local Bauder Area Technical Manager for more information. |
Uniclass | |
CAWS | J31/47 Waterproof coating J31/353 Waterproof coating |
Luokittelutiedot | |
Third-party certification | BBA Certificate: Roofing System - BBA 06/4350 Product Sheet 6 Damp Proofing System - BBA 06/4350 Product Sheet 5. BRE Green Guide: A-D (depending on substrate). |
Colour | Black. |
Kiintoainepitoisuus | 100%. |
Weathertightness | The system will resist the passage of moisture into a building (BBA 06/4350 Section 6-PS6). |
Tuulenkestävyys | The system will resist the effects of any likely wind suction acting on the roof. |
Kestävyys | Under normal service conditions the system will remain waterproof for the design life of the roof in which it is incorporated. (BBA 06/4350 Section 12-PS6). |
Reaktio tulipaloon | Unrestricted with stone, screed or paving cover as European Commission Directive 2000/553/EC. (BBA 06/4350 Section 10-PS6). |
Iskunkestävyys | The system will accept, without damage, the limited foot traffic and loads associated with the installation and maintenance, and the effects of thermal or other minor movements likely to occur in practice. (BBA 06/4350 Section 9-PS6). |
Root protection | The system will resist root penetration from green roof and roof garden systems. (BBA 06/4350 Section 10-PS6). |
Coverage | Nominal Weight 6.5 kg/m² in two layers (exc. protection layer). |
Veden imeytyminen | Gain 0.10g. |
Kemiallinen kestävyys | Resistant to: water, calcium chloride, salt, mild acid and alkaline solutions. Non-resistant to oil, grease or solvents. |
Crack bridging | No cracking, no splitting, no loss of adhesion. |
Flash point | 291°C. |
Rate of application | Nominal thickness 3 mm per single layer/ total 6mm with fabric reinforcement (exc. protection layer). |
HeatingTemperatureDelta | 180-200°C. |
Setting time | Immediate on cooling. |
NBS LCA auttaa rakennusalan ammattilaisia mittaamaan ympäristövaikutuksia ja löytämään vähähiilisiä tuotteita kestävämpiin projekteihin.

Tuotteen valmistusmaa | Canada |
Materiaali | Bitumen |
| Carbon dioxide equivalent | |
Hiilidioksidiekvivalentti, kuten määritelty BS EN 15804 Sertifioitu | |
Vaihe Normalisoitu yksikkö (kg CO₂ eq/kg) Ilmoitettu yksikkö (kg CO₂ eq/m²) Vaihe:A1–A3 (”Tuotantovaihe”) Normalisoitu yksikkö : Ilmoitettu yksikkö :720 Valmistajan ohjeistusPlease refer to EPD. | |
Odotettu Elämä | 50 year |