Compare

RubberGard™ EPDM Single Ply Roofing System (Inverted Roof)

Name: RubberGard™ EPDM Single Ply Roofing System (Inverted Roof)
Brand: Elevate EMEA
SKU: sGcnqHHFS5zgkfo7CSqZTk

Verified by manufacturer 16 hours ago

Elevate EMEA

Product certifications:

BBA Agrément Certificate
Certificate type

An inverted EPDM warm roof system.

Jump to:

+44 (0)151 294 2927 Website

Application

For roofs with regular traffic, or roofs in severe weather climates.

Description

The Inverted System is a variation of the conventional ballasted system. It is particularly suitable for roofs with regular traffic, or roofs in severe weather climates. It can be applied on any building that can accommodate the extra load of the ballast and where the roof slope does not exceed 10%.

Features and benefits:

Circular system.
Low installation cost.
Use of large EPDM sheets.
Fewer seams.
Fast installation.
Large choice of compatible substrates.
Excellent durability
Flexibility for upgrading of insulation in reroofing projects.

System components:

RubberGard™ EPDM LSFR.
Bonding Adhesive BA-2012 (for vertical membrane application).

General information

Color	Black
Material	Rubber
Shape	Rectangle
Length	30500 mm
Width	3050 mm 6100 mm 9150 mm 12200 mm 15250 mm

Uniclass	Ss_30_40_30_80 Single layer sheet warm roof covering systemsPrimary
CAWS	J42/12 Inverted roof covering J42/120 Inverted roof covering

Specification data - Single layer sheet warm roof covering systems

Classification data
Insulation	-
Type	Extruded polystyrene (XPS) boards. Guidance for specification option: Insert thickness requirements.
Attachment	Loose laid over the RubberGard EPDM membrane.
Waterproof covering	-
Type	RubberGard™ EPDM LSFR Roofing Membrane 1.1 mm. RubberGard™ EPDM LSFR Roofing Membrane 1.5 mm. Manufacturer guidance 100% cured non-reinforced, Ethylene-Propylene-Diene Terpolymer (EPDM) synthetic rubber, manufactured in an ISO 9001 and ISO 14001 registered facility. Minimum unspliced width of 3.05 m. Specification compliance: UL Classified/ FM Approved. ASTM D 4637/ EN 13956 (CE Mark). 7500 hrs of Artificial Ageing as per EN 1297.
Attachment	Loose laid. Guidance for specification option: Over rough substrates install a geotextile protection mat, 200 g/m² (minimum) weight, prior to laying the RubberGard EPDM membrane.
Joints	Lap splices: 100 mm minimum overlap with 76 mm QuickSeam Splice Tape.
Upper protection layer	Water flow reducing layer (WFRL). Guidance for specification option: As recommended by the insulation supplier. It will be placed on the insulation layer prior to installation of ballast or slabs on supports.
Surface protection	Geotextile protection mat, 200 g/m² (minimum) weight, and ballast layer, 50 kg/m² (minimum) weight.
System accessories	QuickSeam Splice Tape. QuickSeam FormFlash. QuickSeam Flashing. QuickSeam SA Flashing. QuickSeam Reinforced Perimeter Fastening Strip. QuickSeam Universal Pipe Flashing. QuickSeam Conduit Flashing. QuickSeam Penetration Pocket. QuickSeam Walkway Pad. QuickPrime Plus. Lap Sealant HS. All Purpose (AP) Fasteners. Heavy Duty (HD) Fasteners. Splice Wash (SW-100). Cleaner C-20. Water-Block Seal (S-20). Pourable Sealer S-10 (Parts A & B). Coiled Metal Batten Strip. Metal Batten Strip. Termination Bar.
Corners	QuickSeam FormFlash (external corners) and folded internal corners.
Pipes	Pipe penetrations: QuickSeam FormFlash. Pipe penetrations: QuickSeam Pipe boots and Conduit Flashing.
Outlets	Drains: Install Water Block Sealant between membrane and outlet bowl. Secure membrane mechanically to outlet using integral clamping ring. Drains: Insert outlet bedded on Water Block Sealant. Secure and flash with QuickSeam FormFlash or SA Flashing.
Walls	Wall terminations: Termination bar, fastened with Water Block Sealant and Lap Sealant HS installed along top edge. Guidance for specification option: @200mm (maximum) o.c. Wall terminations: Metal batten bar, fastened with surface mounted or inserted metal counter flashing protection. Guidance for specification option: @150mm (maximum) o.c. Wall terminations: Metal capping or concrete coping stones. Wall termination: Preformed metal edge trim.