Compare

Styccobond F54 - Flooring Adhesive

Name: Styccobond F54 - Flooring Adhesive
Brand: Ball, F and Co Ltd
SKU: vfbjLmNHJ1u1icASALHp86

Verified by manufacturer 1 month ago

Ball, F and Co Ltd

High Grab Linoleum Adhesive

Jump to:

BOS

+44 (0)1538 361633 Website

Application

STIR WELL BEFORE USE

Holding the trowel at an angle of 60°, spread the adhesive evenly over an area of subfloor that can be covered whilst the adhesive remains receptive and gives good transfer.

Following the floorcovering manufacturers laying instructions immediately place the floorcovering into the wet adhesive and press from the centre outwards to exclude any air; then roll from end-to-end and side-to-side using the 68 kg flooring roller. One to four hours later roll again in two directions.

Description

STYCCOBOND F54 is a solvent-free acrylic adhesive, which is designed to give a high strong initial tack and high bond strengths and should be used for securing linoleum floorcoverings.

See the F. Ball Recommended Adhesives Guide for details of specific floorcoverings.

STYCCOBOND F54 can be applied to STOPGAP smoothing compounds, structurally sound, smooth, dry subﬂoors of concrete and sand/cement screed, calcium sulphate screeds, plywood, ﬂooring grade chipboard and hardboard.

STOPGAP waterproof surface membranes, sound ﬂooring grade asphalt and non-absorbent surfaces must be skimmed with a minimum of 3 mm of the appropriate STOPGAP smoothing compound.

STYCCOBOND F54 is suitable for use over normal underﬂoor heating installations.

For details on other subfloors, contact our Technical Service Department.

General information

Color	White
Finish	Trowelled
Material	Acrylic
Shape	Formless
Length	Bespoke
Width	Bespoke
Height	Bespoke
Warranty description	Lifetime

Uniclass	Pr_20_31_02_03 Acrylic and methacrylate adhesivesPrimary
CAWS	M50/20 Sheeting M50/150 Sheeting

SKU Code	F0054G2A
GTIN/EAN	5038464115409

Specification data - Acrylic and methacrylate adhesives

Classification data
Form	One-component.
Open time (minimum)	30 minutes.
Fire performance	Non-flammable.
Colour	Off white.
Carrier	Solvent-free.
Total VOCs (maximum)	0.
Execution	- Manufacturer guidance Trowelled - consult manufacturer for details and insert requirements.
Coverage	3 m² per litre with 2 x 6 mm or B1 trowel.

Sustainability data

Contains Red List materials	No
Country of material origin	Europe
Country of product manufacture	United Kingdom
Material	Acrylic
Carbon dioxide equivalent
Carbon dioxide equivalent, as defined in BS EN 15804 Self-declared
Stage Normalised unit (kg CO₂ eq/kg) Declared unit (kg CO₂ eq/unit) Stage:A1–A3 ('Production stage') Normalised unit : Declared unit : 0
Recyclability	Packaging partly
Recycled content As defined in clause 7.8 of BS EN ISO 14021	0 %