Protective coatings

Uniclass 2015 category Pr_35_31_68

Sort by:

Showing 1-18 of 18

Bund Sealer

Bund Sealer

Enhanced

Watco UK Ltd

One coat, high build, virtually solvent free, epoxy resin bund sealer.
Mapefloor I 302 SL

Mapefloor I 302 SL

Mapei (UK) Ltd

Two-component, multi-purpose, neutral-coloured epoxy formulate for industrial flooring
Mapeproof One Coat

Mapeproof One Coat

Mapei (UK) Ltd

Two-component, single coat application, damp proof membrane for controlling residual and constructional moisture in cementitious substrates.
VanGuard - HydraGuard

VanGuard - HydraGuard

Enhanced

Vuba Building Products Limited

High performance epoxy resin primer.
Hempadur 17940

Hempadur 17940

Enhanced

Hempel A/S

A two-component polyamide adduct-cured epoxy paint.
Hempadur MIO 47950

Hempadur MIO 47950

Enhanced

Hempel A/S

Hempadur MIO 47950 is a two-component polyamide adduct cured, high build epoxy paint.
Hempadur 15570

Hempadur 15570

Enhanced

Hempel A/S

A two component, polyamide-adduct cured epoxy paint.
Hempadur Multi-Strength 45753

Hempadur Multi-Strength 45753

Enhanced

Hempel A/S

Hempadur Multi-Strength 45753 is a self-priming, two-component, highbuild, pure epoxy paint which cures to an abrasion and corrosion resistant coating.Features and Benefits: As a finishing coat where a cosmetic appearance is of less importance.As a ballast tank coating for special purposes such as chemical carriers carrying hot cargoes and other purposes where “pure epoxy coating” is requested.Maximum, dry exposure only: 140°C/284°F In water (no temperature gradient): 50°C/122°.Has a tendency to yellow after application. This will have no influence on the performance.High mechanical resistance.High surface tolerance.Certificates / Approvals:Recognized Abrasion Resistant Ice Coating. Consult Hempel for specific Type Approval Certificates.Meets requirements for internal use in pipelines for power generation when tested according to NS 5417 (Norwegian standard).Product compatibility:Previous coat: None or according to Hempel’s specification.Subsequent coat: None or according to Hempel’s specification. Recommended products are: Hempadur, Hempathane.Application method:Airless spray.Drying time:Determined for dry film thickness 200 micron [7.9 mils] at standard conditions. Indicative values at 20ºC; Touch dry: 2.5 hours, Hard dry: 4 hours, Fully cured: 7 days.
Hempadur 15553

Hempadur 15553

Enhanced

Hempel A/S

Two-component epoxy paint.
Hempaprime Multi 500

Hempaprime Multi 500

Enhanced

Hempel A/S

A two-component, fast drying, high solids epoxy paint.

Hempadur 1555E

Enhanced

Hempel A/S

A two-component polyamide adduct-cured epoxy paint.
Hempadur Avantguard 550

Hempadur Avantguard 550

Enhanced

Hempel A/S

A two-component, activated zinc epoxy primer in compliance with the requirements for Level 3, type II in SSPC Paint 20, 2002.
Hempadur Avantguard 750

Hempadur Avantguard 750

Enhanced

Hempel A/S

An activated, zinc-rich epoxy primer.
Hempadur Multi-Strength GF 35870

Hempadur Multi-Strength GF 35870

Enhanced

Hempel A/S

Hempadur Multi-Strength GF 35870 is an amine-adduct cured epoxy coating.
Hempadur 45143

Hempadur 45143

Enhanced

Hempel A/S

A two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability.
PPG Nu-Klad SL

PPG Nu-Klad SL

Enhanced

PPG Protective Coatings

A 3 component, solvent free, self leveling epoxy floor coating suitable for industrial areas with heavy traffic on to concrete.
Hempadur Speed-Dry ZP 500

Hempadur Speed-Dry ZP 500

Enhanced

Hempel A/S

HEMPADUR SPEED-DRY ZP 500 is a two-component epoxy paint.
Hempadur ZP 47940

Hempadur ZP 47940

Enhanced

Hempel A/S

Hempadur ZP 47940 is a two-component polyamide adduct cured, high build epoxy paint.

Showing 1-18 of 18

Feedback