Metal sections

Galvanised steel floor sections which can be used as both primary beams and secondary joists within a mezzanine floor construction. Cleats are available to over sail the joists above the primary beams or inset within the primary beam depth. Available as standard in gauges up to 5mm.

Available depths: 125, 150, 175, 200, 225, 250, 300, 350, 400, 425, 450, 475, 500 mm.

Galvanised steel panel joint rail Cee section to be used in conjunction with Zed and Cee section rails to provide support for horizontal cladding system joists utilising 140 mm fixing face. Available with long and short cleats to suit side rail system which can be supplied rivetted to the panel joint rail. This section is not to be used at column location for rails less than 261 mm deep.

Combines the fuctions of purlin, cladding rail and gutter support when used at the eaves position. The top flange angle can be specified to slope upwards in 1 degree increments to a maximum of 30 degrees or downwards to 25 degrees. Generally used for monopitch or curved roof systems and also where a precise slope angle is required.

Flat strap lateral bracing is used on both sides of rapid dry envelope panels to support blocking and brace the panel.

Galvanised steel panel joint rail G section to be used in conjunction with Zed and Cee section rails to provide support for horizontal cladding system joists utilising 140 mm fixing face. Available with long and short cleats to suit side rail system which can be supplied rivetted to the panel joint rail.

Flat strap diagonal bracing is used at frame corners and adjacent to openings of load bearing stud panels.

UltraZED purlin and side rail system, re-engineered from the ground up to be fully integrated and offer the most technically advanced profile available on the market; one that's easier to work with, delivers greater load bearing capacity, enhances air permeability within a building and delivers greater sustainability benefits.

A new profile with a choice of 59 purlin gauge and depth options, easily selected via our new DesignSuite Pro software. Generous 70 mm flat fixing face enhances sheeting installation and air permeability performance. CE Marking to BS EN 1090 execution class 4.

Structural door beam header generally used above roller shutter doors and at loading bays.

Deflection Head Bracket to suit Ayrshire CS studs.

Cleader angle is typically fixed to the bottom purlin flange to provide a flat sheeting face support at gable ends.

Verge trim angle fixes to Purlin top flange or at flat roof edges.