Metal sections

Flat strap diagonal bracing is used at frame corners and adjacent to openings of load bearing stud panels.

Structural door post often used for industrial doors and at loading bays.

Channel section, typical uses include door support, floor members, struts and for framing around heating and ventilation equipment.

Available depths: 90, 105, 140, 160 mm.

Deflection Head Bracket to suit Ayrshire CS studs.

Flat strap lateral bracing is used on both sides of rapid dry envelope panels to support blocking and brace the panel.

Combines the fuctions of purlin, cladding rail and gutter support when used at the eaves position. The top flange angle can be specified to slope upwards in 1 degree increments to a maximum of 30 degrees or downwards to 25 degrees. Generally used for monopitch or curved roof systems and also where a precise slope angle is required.

The Alideck Supa Joist is an aluminium joist that has been designed as a standalone product to be used with Ali-Deck standard aluminium decking, slip-resistant aluminium decking and fire resistant balcony decking. It complements the Alideck System and enables super-fast installation times.

It can also be used as a standalone solution and can be used in conjunction with composite and timber decking options.

This all aluminium system is unique and modular, so it can be extended to any length, it can also be simply connected together to create double the span depending on the desired foundation spacings, please see the specifications tab for the loadings for the single joist span capabilities.

Unlike timber, it will not crack, warp, or swell, its impermeable to insects and deterioration, easy to cut and is fade and stain resistant.

The Alideck Low Joist is a strong aluminium support joist which has been designed to be paired with our aluminium balcony decking boards. The aluminium frames ensure a strong construction that is naturally rust resistant and fire resistant to A2-s1, d0. The aluminium is finished with QUALICOAT powder coating in a choice of textured sand and textured silver grey.

Cleader angle is typically fixed to the bottom purlin flange to provide a flat sheeting face support at gable ends.

Verge trim angle fixes to Purlin top flange or at flat roof edges.

Structural door beam header generally used above roller shutter doors and at loading bays.