NBS Source
List your products

Fire alarm detection devices and control equipment

Uniclass category Pr_75_75_30

Sort by:

Showing 1-36 of 77

Power supply Units

Advanced Electronics Ltd

Suited for almost any application, the power supply unit/battery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply.

The power supply units are available in fully enclosed construction providing power and fault indication or alternatively in caged versions for mounting into existing enclosures of various sizes to suit different battery capacities.

PSE and charger or PSE only options on the 3.0A and 5.0A versions.

A Serial Link option is provided on the 3.0A and 5.0A versions. Allows reporting of PSE status and voltages / current measurements to compatible control panel / modules.

Applications:

  • For any fire alarm system which specifies EN54-4 power supplies (e.g. BS 5839 code of practice).
  • These power supply units can be used in any fire alarm installation requiring a 24Volt supply for operation.

Features and benefits:

  • A range of power supply equipment with power output options to suit most applications.
  • Universal AC input on the 3.0A and 5.0A versions.
  • High efficiency switched mode power supplies.
  • Compact 1.5A, 3.0A and 5.0A versions.

MxPro 4 Fire Alarm Control Panel 2-8 Loop

Advanced Electronics Ltd

The MxPro 4 series is fully expandable from 2 to 8 loops complete with 8 onboard sounder circuits. The control panel consists of a simple to use LCD menu driven graphical interface, dual, flash-based microprocessor technology driven by a 5 Amp power supply and charger approved to EN54 parts 2 & 4.

Dedicated system navigation keys make learning this control panel user-friendly as well as installer friendly due to the uncomplicated, trouble free, commissioning and fault finding.

Powerful Cause and Effect programming coupled with dynamic zoning make the panel suitable for a wide range of site applications, from small to large complex multi area systems. Fully on site programmable via on board alphanumeric keypad or PC-NeT Configuration tools.

An extensive suite of PC based software programs has been developed to supplement the MxPro 4 series Fire panels.

Features:

  • Robust, removable equipment chassis with plug-in connectors for simple fixing and cable termination.
  • Advanced graphical LCD user interfaces with up to 1000 fire zones as standard, allowing full EN54 compliance without additional hardware or LED indication.
  • 2 x 5 Amp power supply and charger to EN54 part 4.
  • Dedicated RS232 serial port for direct PC or modem connection.
  • Installer friendly Auto-learn and Loop Detection facility for trouble-free, commissioning. Fully on-site programmable via onboard alphanumeric keypad or PC configuration tools.
  • The graphical display enables the panels to be configured to operate in virtually any language with any character set and allows the installer's logo and company details to be applied to the LCD display.
  • Ad-NeT network with up to 1000 zones.

MxPro 5 Remote Control Terminal

Advanced Electronics Ltd

Features and benefits:

Three types available including;

  • Remote Display Terminal.
  • Remote Control Terminal with additional Mute, Silence, Reset and Resound keys.
  • Remote Control Terminal with additional LED status indication, four programmable push buttons, Mute, Silence, Reset, Resound, Lamp Test and Evacuate Keys.
  • Optional level 2 access enable key switch.
  • Integrated standard or fault-tolerant network interface with screen termination point.
  • Programmable display for up to 2,000 zones along with sector based controls.

QuickZone Repeater - Repeater panel

Advanced Electronics Ltd

QuickZone XL Repeater Panel.

Repeater Panel Features:

  • Same easy-to-use controls and indications as panel.
  • Can be fully functional or passive.
  • 12 zonal fault and fire indication.
  • 1.25 Amp integral PSU.
  • Class change and alert input.
  • Test mode and disablement functions.
  • Up to 8 per main panel.
  • Approved to EN54-2&4.
  • 3 year warranty.

Intelligent Base Mounted Triple IR Flame Detector

Apollo Fire Detectors Ltd

The Intelligent Base Mounted IR3 Flame Detector is designed to protect all indoor areas, even in dirty or smoky conditions where open flaming fires may be expected. The detector has three IR sensors that respond to different IR wavelengths in order to discriminate between flames and spurious sources of radiation.

  • Responds to stationary flames with no flicker
  • Sensitive to low-frequency flickering IR radiation emitted by flames during combustion
  • Compact flame detector which fits into Discovery or XP95 bases
  • Loop-powered
  • False alarms due to factors such as flickering sunlight are avoided by a combination of filters and signal processing techniques

Visual Indicator Enclosure

Apollo Fire Detectors Ltd

The Visual Indicator Enclosure is weatherproof and allows Apollo's loop-powered visual indicator to be used in high moisture environments such as swimming pools and food processing areas where wash-down occurs. The enclosure is supplied with a mounting bracket to accept a Discovery or XP95 base.

  • Protects against water ingress
  • Allows visual indicators to be used outdoors
  • Accepts MiniDisc Remote Indicator

Minidisc Remote Indicator

Apollo Fire Detectors Ltd

The MiniDisc Remote Indicator is a light-weight, compact, red LED indicator for use in fire protection systems.

  • Can be used across the entire Apollo range
  • Small and discrete
  • Anti-tamper screw to protect against unauthorised removal

Apollo Waterproof Manual Call Point with Isolator

Apollo Fire Detectors Ltd

Apollo's Waterproof Addressable Manual Call Point has a highly visible alarm indicator which can be seen from up to 10 metres away. When activated, the manual call point interrupts the polling cycle for a fast response and has a combined LED indicator and front reset mechanism allowing for a quick and simple reset.

  • EN 54-11 approved (EN 54-17 approved for Isolator version)
  • E-Z fit connectors
  • Front facing addressing without the need to detach the backbox
  • A unique, ergonomically designed key for resetting and front cover removal


Please Note: The Yellow Waterproof Manual Call Point is not EN 54-11 compliant as the standard permits only Red Manual Call Points be used to signal fire.

XP95 Heat Detector A2S

Apollo Fire Detectors Ltd

The XP95 Heat Detector monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature. The XP95 range features two heat detectors, standard and high temperature. The standard heat detector is classified as an A2S device and will report an alarm at 55°C. The high temperature detector, classified as a CS device, will report an alarm at 90°C.

  • Ideal in environments that are dirty or smoky under natural conditions
  • Well suited for warehouses, loading bays and car parks
  • Unaffected by wind or atmospheric pressure

Apollo Waterproof Manual Call Point

Apollo Fire Detectors Ltd

Apollo's Waterproof Addressable Manual Call Point has a highly visible alarm indicator which can be seen from up to 10 metres away. When activated, the manual call point interrupts the polling cycle for a fast response and has a combined LED indicator and front reset mechanism allowing for a quick and simple reset.

  • EN 54-11 approved (EN 54-17 approved for Isolator version)
  • E-Z fit connectors
  • Front facing addressing without the need to detach the backbox
  • A unique, ergonomically designed key for resetting and front cover removal


Please Note: The Yellow Waterproof Manual Call Point is not EN 54-11 compliant as the standard permits only Red Manual Call Points be used to signal fire.

Intelligent Flameproof IR3 Flame Detector

Apollo Fire Detectors Ltd

The Intelligent Triple IR Flame Detector (IR3) is designed to protect areas where open flaming fires may be expected. It is sensitive to low frequency, flickering infra-red radiation emitted by flames during combustion.

  • Loop-powered
  • Sensitive to flickering IR radiation
  • Detects through films of oil, dust, water and ice
  • Responds to flickering flames, including those invisible to the naked eye
  • False alarms due to lighting or flickering sunlight are minimised
  • Compatible with Discovery and XP95 protocols

Soteria® Optical Detector

Apollo Fire Detectors Ltd

The SOTERIA® Optical Detector uses new optical sensing technology PureLight®, to detect smoke particles entering the chamber. PureLight™ marks a new stage in the development of Apollo optical technology and aims to reduce the possibility of false alarms and to increase the reliability of detection of a real fire.

  • PureLight® optical technology reduces false alarms and enhances smoke recognition
  • Utilises digital CoreProtocol® communications
  • Compatible with existing fire control panels*
  • Mechanically compatible with existing bases
  • Available with or without integrated switchable isolator
  • Drift compensation
  • Tri-coloured LED status indicator
  • Polycarbonate moulding for colour stability and strength
  • Comprehensively tested to exceed EN 54-7 standard
  • FasTest® for quicker testing of detectors
  • XPERT card addressing or auto addressing
  • Locking mechanism

*Note: Not all features are available when SOTERIA® devices are connected to an XP95 or Discovery fire control panel.

Soteria® Multisensor Detector with Isolator

Apollo Fire Detectors Ltd

The SOTERIA® Optical/Heat Multisensor Detector uses new optical sensing technology, PureLight®, to detect smoke particles entering the chamber and is fitted with two thermistors for detecting heat. It can be switched to detect smoke, heat or a combination of both offering flexibility.

  • Dual heat sensors
  • PureLight® optical technology reduces false alarms and enhances smoke recognition
  • Utilises digital CoreProtocol® communications
  • Compatible with XP95 and Discovery systems*
  • Compatible with existing fire control panels*
  • Mechanically compatible with existing bases
  • Available with or without integrated switchable isolator
  • Tri-coloured LED status indicator
  • Polycarbonate moulding for colour stability and strength
  • Comprehensively tested to exceed EN 54-5 standard
  • FasTest® for quicker testing of detectors
  • XPERT card addressing or auto addressing
  • Locking mechanism (grub screw)

*Note: Not all features are available when SOTERIA® devices are connected to an XP95 or Discovery fire control panel.

XP95 Multisensor Detector

Apollo Fire Detectors Ltd

The XP95 multisensor Detector contains an optical smoke sensor and a thermistor temperature sensor whose outputs are combined to give the final analogue value.

  • Sensitive to a wide range of fires
  • Well suited for environments such as hotel bedrooms
  • Unaffected by wind or atmospheric pressure

Soteria® Heat Detector

Apollo Fire Detectors Ltd

The SOTERIA® Heat Detector features two heat sensors located laterally to ensure good heat detection in all orientations.

  • Dual heat sensors
  • Utilises digital CoreProtocol® communications
  • Compatible with XP95 and Discovery systems*
  • Compatible with existing fire control panels*
  • Mechanically compatible with existing bases
  • Available with or without integrated switchable isolator
  • Tri-coloured LED status indicator
  • Polycarbonate moulding for colour stability and strength
  • Comprehensively tested to exceed EN 54-5 standard
  • FasTest® for quicker testing of detectors
  • XPERT card addressing or auto addressing
  • Locking mechanism (grub screw)

*Note: Not all features are available when SOTERIA® devices are connected to an XP95 or Discovery fire control panel.

XP95 Ionisation Smoke Detector

Apollo Fire Detectors Ltd

The XP95 Ionisation Smoke Detector uses a low activity radioactive foil to detect fires by irradiating the air in the smoke chambers causing a current flow. If smoke enters the chamber, the current flow is reduced leading to an alarm.

  • Responds well to fast-burning, flaming fires
  • Designed to operate in a variety of environments
  • Minimal effects from the temperature, humidity, atmospheric pressure
  • Well protected against electromagnetic interference over a wide frequency range

Loop-powered Visual Indicator - Red

Apollo Fire Detectors Ltd

The Loop-Powered Visual Indicator is a local-area visual indicator designed for indoor use. The Visual Indicator has been developed as a supplement to sounders for use in situations where there is a risk that sounders will not be heard.

  • High intensity LEDs
  • More reliable than xenon visual indicators
  • Automatic LED check
  • Lockable
  • Wide angle of visibility
  • Enables DDA compliance
  • Synchronised flash
  • Can be used with Discovery or XP95

Cat W Loop Powered VAD W-2.5-7

Apollo Fire Detectors Ltd

The VAD has been developed as a primary or supplementary alarm device for use in situations where there is a risk that sounders will not be heard. This occurs, for example, where there is a high background noise e.g. in a workshop or a machine room.

It might also be required where deaf or hearing impaired persons may be present.

  • Uses high intensity LED (white flash only)
  • EN 54-23 Compliant Category W. VAD
  • Coverage W-2.5-7
  • Automatic LED check when VAD activated
  • Flash rate 0.5Hz
  • Fault signal if LED check failed
  • Locking mechanism (grub screw)
  • Wide angle of visibility
  • Synchronised with the Apollo Protocol

XP95 Heat Detector CS

Apollo Fire Detectors Ltd

The XP95 Heat Detector monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature. The XP95 range features two heat detectors, standard and high temperature. The standard heat detector is classified as an A2S device and will report an alarm at 55°C. The high temperature detector, classified as a CS device, will report an alarm at 90°C.

  • Ideal in environments that are dirty or smoky under natural conditions
  • Well suited for warehouses, loading bays and car parks
  • Unaffected by wind or atmospheric pressure

Discovery CO-Heat Multisensor Detector

Apollo Fire Detectors Ltd

The Discovery CO/Heat Multisensor Detector is good at detecting deep-seated smouldering fires which give off a lot of CO as well as flaming fires. They are ideal for use in hotel bedrooms where steam may be present, dusty environments or even where simulated smoke may be present.

  • Responds to smouldering and flaming fires
  • Less susceptible to false alarms caused by steam and dust
  • Five response modes
  • Remote test feature

XP95 Optical Smoke Detector

Apollo Fire Detectors Ltd

The XP95 Optical Smoke Detector works using the light scatter principle and is ideal for applications where slow-burning or smouldering fires are likely.

  • Responds well to slow-burning, smouldering fires
  • Well suited for bedrooms and escape routes
  • Unaffected by the wind or atmospheric pressure

Soteria® Heat Detector with Isolator

Apollo Fire Detectors Ltd

The SOTERIA® Heat Detector features two heat sensors located laterally to ensure good heat detection in all orientations.

  • Dual heat sensors
  • Utilises digital CoreProtocol® communications
  • Compatible with XP95 and Discovery systems*
  • Compatible with existing fire control panels*
  • Mechanically compatible with existing bases
  • Available with or without integrated switchable isolator
  • Tri-coloured LED status indicator
  • Polycarbonate moulding for colour stability and strength
  • Comprehensively tested to exceed EN 54-5 standard
  • FasTest® for quicker testing of detectors
  • XPERT card addressing or auto addressing
  • Locking mechanism (grub screw)

*Note: Not all features are available when SOTERIA® devices are connected to an XP95 or Discovery fire control panel.

Intelligent Open-Area Sounder

Apollo Fire Detectors Ltd

The Intelligent Open-Area Sounder has been designed for use in open areas and can be connected to any Discovery or XP95 system.

  • Self-test fault monitoring
  • Choice of tones on standard device: Apollo, Slow Whoop and DIN
  • Two volume settings 92dB(A) and 100dB(A)
  • Synchronisation of tones
  • Individual and group addressing
  • Built in isolator
  • Red or white options
  • Loop-powered
  • IP65 rated

Water Proof Multi-Tone Open-Area Sounder

Apollo Fire Detectors Ltd

The Weatherproof Multi-Tone Open-Area Sounder is designed for use in open areas and can be connected to any Discovery or XP95 system.

  • Updated to include choice of tones: Apollo, slow whoop and DIN
  • Two volume settings 92dB(A) and 100dB(A)
  • Synchronisation of tones
  • Individual and group addressing
  • Loop Powered
  • Red or White options
  • IP66 rated

Discovery Open-Area Sounder Visual Indicator

Apollo Fire Detectors Ltd

The Discovery Open-Area Sounder Visual Indicator makes full use of the Discovery protocol and has been designed for use in indoor and open areas. When the fire system is being commissioned a 'Magnetic Wand' can be used to adjust and test each sounder locally.

  • 15 tone pairs
  • Individual control of the sounder and visual indicator
  • Volume and tone settings can be selected from the control panel
  • Tones can be used for other purposes in addition to warning of fire, making the device ideal for use in schools etc.
  • Soft start option, ideal for hospitals and nursing homes
  • Group and global control for increased response time

Discovery Multisensor Detector

Apollo Fire Detectors Ltd

The Discovery Multisensor Detector comprises optical smoke and thermistor temperature sensors which give both a combined signal as well as a separate heat signal for improved false alarm management.

  • Ideal for a wide range of applications
  • Enhanced false alarm management
  • Recommended, in specific modes, for hotel bedrooms and hospital wards
  • Unaffected by wind or atmospheric pressure
  • Well suited for sensitive environments
  • Five response models
  • Heat only and optical only options
  • Remote test feature

Cat C Loop Powered VAD C-3-8.5

Apollo Fire Detectors Ltd

The VAD has been developed as a primary or supplementary alarm device for use in situations where there is a risk that sounders will not be heard. This occurs, for example, where there is a high background noise e.g. in a workshop or a machine room.

It might also be required where deaf or hearing impaired persons may be present.

  • Uses high intensity LED (white flash only)
  • EN 54-23 Compliant Category C. VAD
  • Coverage C-3-8.5 & C-3-15
  • Automatic LED check when VAD activated
  • Flash rate 0.5Hz
  • Fault signal if LED check failed
  • Locking mechanism (grub screw)
  • Wide angle of visibility
  • Synchronised with the Apollo Protocol

Loop-powered Visual Indicator - Clear Lens Red Flash

Apollo Fire Detectors Ltd

The Loop-Powered Visual Indicator is a local-area visual indicator designed for indoor use. The Visual Indicator has been developed as a supplement to sounders for use in situations where there is a risk that sounders will not be heard.

  • High intensity LEDs
  • More reliable than xenon visual indicators
  • Automatic LED check
  • Lockable
  • Wide angle of visibility
  • Enables DDA compliance
  • Synchronised flash
  • Can be used with Discovery or XP95

Soteria® Optical Detector with Isolator

Apollo Fire Detectors Ltd

The SOTERIA® Optical Detector uses new optical sensing technology PureLight®, to detect smoke particles entering the chamber. PureLight™ marks a new stage in the development of Apollo optical technology and aims to reduce the possibility of false alarms and to increase the reliability of detection of a real fire.

  • PureLight® optical technology reduces false alarms and enhances smoke recognition
  • Utilises digital CoreProtocol® communications
  • Compatible with existing fire control panels*
  • Mechanically compatible with existing bases
  • Available with or without integrated switchable isolator
  • Drift compensation
  • Tri-coloured LED status indicator
  • Polycarbonate moulding for colour stability and strength
  • Comprehensively tested to exceed EN 54-7 standard
  • FasTest® for quicker testing of detectors
  • XPERT card addressing or auto addressing
  • Locking mechanism

*Note: Not all features are available when SOTERIA® devices are connected to an XP95 or Discovery fire control panel.

Intelligent Open-Area Sounder Visual Indicator

Apollo Fire Detectors Ltd

The Intelligent Open-Area Sounder Visual Indicator is designed for use in open areas and can be connected to an Apollo Discovery or XP95 system.

  • Self-test monitoring
  • Choice of tones on standard device: Apollo, Slow Whoop and DIN
  • Two volume settings 92dB(A) and 100dB(A)
  • Individual and group addressing
  • Synchronisation of tones and flashes
  • Built in isolator
  • Loop-powered
  • IP65 rated
  • Red and clear lens options

Stainless Steel Intelligent IR3 Flame Detector

Apollo Fire Detectors Ltd

The Stainless Steel Intelligent IR3 Flame Detector combines high performance with added protection against the effects of salt corrosion making it ideal for most marine applications.

The protection from salt corrosion is provided by a tough, heavy-duty housing made from stainless steel material. It can rapidly detect all types of flames, including hydrogen which is invisible to the human eye.

  • Operation with control equipment using Apollo's class leading XP95 or Discovery protocol
  • Quick and easy stainless steel 2 axis adjustable mounting bracket
  • Ability to detect 0.1m2 flames at a distance of 25m as required by EN54 10

Loop-powered Visual Indicator - Amber

Apollo Fire Detectors Ltd

The Loop-Powered Visual Indicator is a local-area visual indicator designed for indoor use. The Visual Indicator has been developed as a supplement to sounders for use in situations where there is a risk that sounders will not be heard.

  • High intensity LEDs
  • More reliable than xenon visual indicators
  • Automatic LED check
  • Lockable
  • Wide angle of visibility
  • Enables DDA compliance
  • Synchronised flash
  • Can be used with Discovery or XP95

Waterproof Multi-Tone Open-Area Sounder Visual Indicator

Apollo Fire Detectors Ltd

The Weatherproof Multi-Tone Open-Area Sounder Visual Indicator is designed for use in outdoor open areas and can be connected to any Discovery or XP95 system. The sounder visual indicator complements Apollo's intelligent and integrated base sounders as well as the Multi-Tone Open-Area Sounder.

  • Choice of tones on standard device: Apollo, Slow Whoop, and DIN
  • IP66 rated
  • Two Volume settings 92dB(A) and 100dB(A)
  • Synchronisation of 'alert' and 'evacuate' tones
  • Individual and group addressing
  • Built in isolator

Kidde Mains-Powered Heat Alarm

Kidde Safety Europe Ltd

Kidde mains-powered heat alarm models:
- KF30 with 9V Alkaline battery back-up
- KF30LL with 10-year lithium battery back-up
- KF30R with rechargeable battery back-up
These alarms will interlink with up to 23 other Kidde mains-powered alarms.

Kidde Mains-Powered Ionisation Smoke Alarm

Kidde Safety Europe Ltd

Kidde mains-powered ionisation smoke alarm models:
- KF10 with 9V Alkaline battery back-up
- KF10LL with 10-year lithium battery back-up
- KF10R with rechargeable battery back-up
These alarms will interlink with up to 23 other Kidde mains-powered alarms.

Kidde Mains-Powered Optical Smoke Alarm

Kidde Safety Europe Ltd

Kidde mains-powered optical smoke alarm models:
- KF20 with 9V Alkaline battery back-up
- KF20LL with 10-year lithium battery back-up
- KF20R with rechargeable battery back-up
These alarms will interlink with up to 23 other Kidde mains-powered alarms.

Showing 1-36 of 77

Feedback