Lime Prime: Essential Primer for Stabilizing Porous and Lime-Based Substrates - Internal Wall Primer

Apply Lime Prime by low pressure or with airless spray equipment with just one layer approximately 100 gr/m², depending on the porosity of the substrate.

• Shake before use.
• Remove dust and all friable parts from the substrate.
• The application of Lime Prime does not avoid the need for substrate preparation.
• Apply Lime Prime by low pressure spray or with airless spray equipment.
• Apply only 1 layer, approximately 100 gr/m², depending on the porosity of the substrate.
• Allow to dry before application of water-born dispersion coatings.
• Do not dilute.
• Apply only on porous substrates.
• Minimal application temperature : +5° C.
• To be applied between +5° C to +35° C.
• Do not apply in sunlight.
• Clean tools with water.

Suitable for use on:

• Lime-based substrates.
• Older dusty substrates to consolidate.
• Water sensitive substrates such as gypsum board and gypsum plaster.