"solid fuel fires room heaters stoves"

Architecturally designed, the new build Technology Rooms at Nagel College in Bairnsdale feature PROCORE A1® highlights in Candy Red and Golden Yellow. These striking elements contrast against the warm tones of the timber and the earthiness of its rural setting.

With a glass façade symbolising the transparency of justice and a glossy metal exoskeleton, the new Maison de l’Ordre des Avocats (House of the Paris Bar Association) is a stunning addition to the French capital’s new Batignolles judicial city. For the building owner, safety is a top priority. Therefore, the exoskeleton needed a proven passive fire protection coating that would enable the steel to maintain its load-bearing capacity for up to 60 minutes during a fire, giving those inside valuable extra time to evacuate.The challenge Specialist paint application and surface treatment company ROTH & Cie was contracted to apply the passive fire protection coating system. ROTH & Cie has worked with Hempel for many years and was keen to work with us on this project. However, due to the project schedule, the tubular exoskeleton framework was delivered to the construction site with a competitor’s epoxy primer already applied. ROTH & Cie therefore wanted a Hempel passive fire protection system that would work with the existing primer. Also, as building aesthetics are important in the overall design, the exoskeleton needed a high-quality matt satin finish. The solution Our solution was to specify a system of Hempafire Pro 315 and Hempathane 55750. A single component intumescent coating, Hempafire Pro 315 complies with the EN 13501-2 standard for the fire classification of construction products. It is optimised to provide 60 minutes of passive fire protection, as well as partial protection up to 90 minutes. In addition, thanks to its exceptionally low loadings, Hempafire Pro 315 requires significantly lower dry film thicknesses than competitor products. As a result, ROTH & Cie could apply the coating in a thinner coat, significantly reducing paint consumption, application time and project costs. The full system was completed with Hempathane 55750, a polyurethane topcoat with quick crosslinking properties that provides the matt satin appearance required by the specifications. Our dedicated passive fire protection R&D Centre in Barcelona, Spain verified that Hempafire Pro 315 could be applied on top of the existing primer. The entire system was spray applied using an electric airless pump, which is ideal for construction sites as it does not require an air compressor. The project is just another in a long line of successful collaborations with ROTH & Cie, which also include previous passive fire protection coating projects, most notably La Halle Secrétan covered market and La Samaritaine department store, both in Paris.At a glance Project Name: Maison de l’Ordre des Avocats (House of the Paris Bar Association) Customer: ROTH & Cie System: Hempafire Pro 315 + Hempathane 55750 Volume: 4,080 litres

At the new 6,000-seater Jordal Amfi ice hockey stadium in Oslo, Norway, player and spectator safety is a top priority. The stadium owner wanted a coating system which included passive fire protection, so, when Danish-based Give Steel was contracted to produce the steel structures, they had to not only meet the customer specification for fire protection but also consider the logistics of the project.The steel pieces were produced in Denmark, and Give Steel needed a coating system that was robust enough to protect the steel during transportation and erection onsite.

The Uni of Queensland Emmanual College features the following RBA products:The 2011 Brisbane floods initiated the refurbishment of parts of University of Queensland’s Emmanuel College and created an opportunity to upgrade student amenities. The Facilities Managers decided to control water usage by using RBA’s Time-Trol shower controller. At the same time, they chose to replace out-dated twin element ‘boiler’ water heaters with instantaneous gas. The results were astonishing. “The university estimates it is now saving $60-$70K per year in water and energy savings.”The Time-Trol Shower unit allows maintenance staff to nominate run-time and lock-out parameters. These can be selected from, and changed to, any one of 12 options. No special coding required, just the flick of a dial by staff. It was ultimately decided to offer students a 5 minutes shower with a 30 second lockout. According to university staff ‘…the students have adapted to the usage restrictions seamlessly. There hasn’t been a complaint uttered…’

PROMINIUM in Natural White has been utilized on this project for Kenworth Trucks. The spectacular result on the sales and service complex is worthy of this iconic brand. The choice of PROMINIUM 3mm Solid Aluminium ensures the façade is rated non-combustible to AS 1530.1 Standards, safeguarding vehicles, plant and personnel.

Rondo provided a solid support foundation, using resources from both international and Australian technical services departments. The South West Pier (Stage 1), was built by Rachana Arts and saw Rondo provide assistance for the Corian cladding to the columns by creating adjustable and concealed fixings that were purposely designed for the hollow section support framing, as well as providing Stud and Track to support the various cladding materials.

There is a saying that “Everything is Bigger in Texas,” and the Dallas, Texas police department is no exception. The city of Dallas is ranked in the top 10 cities in the U.S. in terms of population, at 1.2 million people. The Dallas Police Department is the ninth largest municipal police force in the U.S., based on 3,012 sworn officers. It is led by Chief of Police, U. Reneé Hall. Security a Concern When Designing HQ Building The department is located in the Jack Evans Police Headquarters building, which was built in 2003. It is 358,000 square feet, has six floors, is spread over a three-acre site, has a separate 1,200 car parking garage and a two-acre, open parking lot for additional visitor parking. Prior to 2003, the department was housed in the circa 1914 former City Hall Building. The Jack Evans Police Headquarters building was under construction when 9/11 terrorists flew airplanes into the World Trade Buildings in New York. That event was preceded by the Oklahoma City Murrah Federal Building bombing in April 1995. Therefore, security was a concern in its design. Police officials worked with a Police Design Consultant – McClaren, Wilson, and Lawrie Architects of Phoenix – to help design the building to resist a terrorist attack and isolate potential hazards. The building also needed to control visitor traffic and access. On an average month, there are 5,000 public visitors to the Jack Evans building. In addition, shots fired at police buildings nationally are not uncommon, says Paul M. Schuster, Senior Corporal/Facilities Management for the Dallas Police Department. “For the most part they are random, single shot drive-by shootings. Often, the officers are unaware that the building has been shot at, until they find a bullet hole in the brick or glass. Increasingly, police tend to be a symbol of government and some citizens see that as a visible target to lash out at. Police officers are trained to expect the routine types of calls, such as domestic violence, traffic accidents, and other crimes. Yet they must be flexible to anticipate the non-routine that can be dangerous and change in a heartbeat.” An Active Shooter Incident Led to an Increase in Security On June 13, 2015, after midnight, a 35-year-old male placed a duffle bag with a remote-controlled bomb to detonate later between cars in the parking lot of the headquarters building. The suspect then began shooting continuously at the lobby windows. Officers responded to the scene, a vehicle chase began, and the incident ended outside the city. Luckily officers in the lobby took cover and were not injured. Following that incident, the Dallas Police Department conducted a security assessment of the building and also at seven patrol stations throughout the city. The assessment included testing various construction materials for bullet resistance to various types of weapons. Gensler Architects and Guidepost Solutions, LLC developed the solutions and plans. “Yesterday we were concerned about handguns, today we are worried about rifles, and the idea of terrorism is always present with outright attack or bombs,” Schuster notes. “The police officers and police staff only want a place that is safe and where they can do their good work.” Funding of $1.3 million was approved to upgrade the lobbies of the seven patrol stations to withstand rifle rounds, and $1.9 million to improve headquarters lobby security, and to upgrade an aging security system. Turner Construction Company and Convergint Technologies, LLC conducted the renovations and security technology integration. Challenges to the Security Design The headquarter’s lobby was initially designed as a two-story glass-walled structure, with an information desk and public records service windows. Visitors were allowed free entry into the lobby and were only screened in an open area to the side if going to other floors. “The challenge in upgrading lobby security was the two-story lobby entrance glass. “In addition, there were concerns about keeping an ‘open’ and friendly service concept in mind and ensuring that the lobby would not resemble a ‘fortress’,” Schuster notes. Screening Room with Security Revolving Doors to Contain Incidents The solution was to keep the existing exterior unchanged and focus on adding a layer of security once a person enters the lobby. Visitors now enter the headquarters and immediately proceed to a side room where security screening is conducted. A new secondary wall with bullet-rated glass and solid bullet resistant wall materials was constructed inside the lobby to channel visitors to the room. Once inside the screening room, which also has bullet resistant walls, the visitor has belongings x-rayed, and they walk through a metal detector. In the event that anyone was to produce a gun and begin shooting, the incident could be contained inside that room. Once a visitor has been cleared, they proceed into the main lobby via a Boon Edam Tourlock 180 security revolving door. This automatic, four-wing door is the most advanced, security revolving door in the Boon Edam product range that offers maximum throughput, allowing users to enter and leave the building simultaneously. In the event that a large number of persons try to force their way into the facility, the Tourlock 180+90 will determine that more than one person is trying to enter and will reject the person and lock out any others from entering. Once a visitor is ready to leave the lobby and exit the building, they pass through another Boon Edam Tourlock 180+90 that leads to a vestibule with exterior swinging doors. In the event that someone tries to go back into the lobby from the front vestibule area, without going through the security screening room, the Tourlock security revolving door will reject their entry.

RagingWire is one of the largest and most solid data centers in the world. They were one of the first companies that helped to build the multi-billion dollar global data center co-location industry. Now, RagingWire is the data center platform of NTT Communications in North America, which operates 140 data centers in 20 countries worldwide. RagingWire uses Tourlock security revolving doors at its Ashburn VA3 Data Center and its Sacramento CA3 Data Center. They are part of RagingWire’s larger portfolio of data centers in Ashburn, Northern California and Dallas, Texas.

For instance, the guest room ensuite walls were mainly comprised of glazed aluminium panels made overseas. Unfortunately, this meant there were minimal tolerances in the set-out. Yet, because the hotel floors were generally the same layout, Rondo created a template system for setting out most of the guest rooms while also ensuring that ceiling heights were set exactly.

The Rondo team worked with the architect and builder to overcome the specific fire curtain wall design requirement for the lobby walls, ceiling and bulkhead. Rondo benefited the project through multiple design options and regular site inspections which supported both the contractor and the builder.

Rondo’s Technical Team supplied emblematic CAD floor plans and designs for wall types including acoustic and fire rating to board to the manufacturer’s specifications. Onsite support from Rondo included assistance in setting out, framing, lining and finishing training as well material supply coordination.

Fairview supplied builder Stokes Wheeler with Vitracore G2 for the Jaguar Land Rover 3-storey showroom at Southport, QLD. The high-end development required a premium finish in Jaguar Land Rover’s corporate colours and Vitracore G2 was selected as the preferred façade solution due to fire compliance.

Rondo was able to provide a solution to suit the projects’ specific design criteria by using readily available materials and technical support. The wall framing for the MPS room consisted of over 31m of 150mm Steel Stud and Track, including noggings.

Construction has concluded on the redevelopment of the ‘old Harris Scarfe’ site at Rundle Mall in Adelaide. The renovations seek to re-energise the area but remain committed to preserve Adelaide’s most cherished department store. Four floors of retail space have had the base built by Interior Projects who have been a valued Rondo customer since 1988. Rondo provided essential technical expertise and design solutions for the fire walls and security mesh between tenancies.

The Canberra Hospital features the following RBA products:RBA8851-137 in their recently completed Bariatric Ward rooms.Canberra Hospital is the major public medical establishment based in Australia’s Capital Territory, with 672 beds to cater for the territory’s population of 550,000. The Hospital provides services including acute inpatient and day services, outpatient services, women’s and children’s services, paediatrics and pathology. Canberra Hospital is also a hub for education and research, remaining as the main teaching hospital for the Australian National University Medical School and the University of Canberra’s Nursing School. Canberra Hospital additionally accommodates for Clinical Pastoral Care institutions based in Sydney. RBA was thrilled to participate on a project that could better the experiences of both a myriad of patients and students.Canberra Hospital reached out to RBA to provide for a number of brand new Bariatric Rooms and one “Super Bariatric Room” during a refurbishment of the hospital’s orthopaedics services. These amenities are essential to providing comfortable care for individuals struggling with the growing obesity crisis, the Super Bariatric Room catering to people weighing up to half a tonne. As a result, RBA had to supply high quality, heavy duty bariatric facilities, whilst keeping a homely character to make patients comfortable in the clinical environment. Read the news article from the Canberra Times RBA’s supplication of our Bariatric Toilet, or the RBA8851-137, pictured below was vital for the project. Made of Stainless Steel, the toilet can withstand loads of up to 910 kg with no measurable deflection and 2200 kg with no permanent damage, maintaining strong and secure for its intended usage. Furthermore, the 304-type, or “Food Grade” Stainless Steel is constructed with corrosion resistance and allows for optimal hygiene. The unit supplied to Canberra Hospital has an optional P or S Trap, coming in an Enviro-Glaze® White Finish, best suited for the setting. However, this unit is also offered Enviro-Glaze® White external finish and a Stainless Steel internal finish, or a Stainless Steel total finish. Moreover, the unit is water-saving, holding a 3 Star (6.0L FF/3.0L HF/3.6L AF) WELS rating. The unit can additionally be accompanied by RBA’s Big John Bariatric Toilet Seat, or the RBA8186-853.

Due to tight plenum space and extremely congested plenum areas, Rondo’s new Xpress Drywall Grid System was the ideal ceiling system to use. This maximised the ceiling heights in all guest rooms while offering compliant plenum vertical clearances. Contractors implemented Rondo’s intricate feature ceilings and bulkheads throughout the entire building, such areas included the lobby, restaurants and conference areas.

Supercar, Super FinishThe new Porsche dealership in central Hamburg provides customers with the high-level comfort, convenience and safety associated with the brand. A striking new complex is being erected in Hamburg city centre, which includes the Porsche Center Hamburg Alstergate, due to open this spring. Hamburg is a leading Porsche stronghold, reputed to have the highest density of Porsche owners in the world, with a 0.8% quota of the city’s car population and nearly 1,000 vehicles a year sold regionally since 2014. Covering almost 8,000m2 of land, the Alstergate plot has over 200 parking spaces, including an underground car park with valet parking service. Attending to the growing Porsche model range, the building will have four new charging points for electric and hybrid vehicles and will be one of the few German competence centres for the 918 Spyder supercar and Carrera GT. Along with the new building, Porsche’s workforce in the region is set to grow to 115 employees.Such a prominent Porsche dealership in northern Germany’s foremost metropolis demands extraordinary standards from the construction and décor contractors entrusted with the project. Applicators Strahl, Reinigungs & Anstrichtechnik of Kiel, with whom Hempel already has long-standing commercial relations, were required to produce the extra smooth surface finishes sought by thedesigners. Furthermore, public safety is an inherent factor that has to be considered in all aspects of construction, so applicators chose to apply Hempacore One as the intermediate coat on ready-primed steelworks, prior to finishing with a topcoat of our Hempathane 87481 enamel.Both Hempacore One 43600 and its fast-drying 43601 version provide up to 120 minutes retardation in the event of fire, a factor of great importance in buildings designed for public access. Significantly on this occasion, Hempacore One does not just offer excellent passive fire protection but also certain additional features of great value to designers and applicators alike. The fact that its full fire retardant properties can be achieved with much lowerlayer thicknesses makes for speedier work and also more natural aesthetics on visible steelwork. Lower layer thickness naturally means less paint consumption, thus allowing project managers to make significant savings.Porsche’s new state-of-the-art centre in Hamburg underlines the company’s values of Tradition & Innovation; Performance & Practicality; Design & Functionality; and Exclusiveness & Social Acceptance and the professional application of Hempel coatings help to uphold and enhance those same values.

The tower corridors to the hotel rooms followed a slight curve and the Rondo Technical Services Team were engaged to provide many engineered designs for both internal and external wall framings, as well as internal ceilings and external soffit framings. This included Stud & Track, MAXIframe External Wall Framing System, EXANGLE Finishing Sections and PANTHER Access Panels, all needed to meet the detail required throughout the tower and podium levels.

Architects from APP Arch-Studio created a building that serves as a multi-functional cultural centre, hosting important musical events, painting and photography exhibitions, as well as theatrical performances and film screenings. Combining all these functions was made possible due to a clear division of the building into two spatial modules: the glazed part acts as a philharmonic hall, while the second part is visual and exhibit-like, comprising of photography studios and a small cinema room.

Steve Domoney Architecture took on the challenge of designing a home for clients with children. This project came with a clear vision of a spacious family home, contemporary in line and warm in tone. The dining room has Capral AGS windows opening at exterior ground level to a fernery, while high-level Capral AGS 419 Flushline Framing System beyond the kitchen provides views to distant trees in the south-east. The formal lounge opens to a generous decking and garden behind.

Rondo supported Maxcon Pty Ltd through contractor L&Y Commercial for this project incorporating two 26 and 36 story residential towers of 551 apartments, an Art Series Hotel with 90 rooms, retail spaces and serviced offices. Due to the large-scale nature of the build, our customer was very satisfied with Rondo’s ability to provide quick turnaround times for crane lifts as well as our efficient and effective operation of installation and delivery of goods on site, on time.

Forget predictable ‘Hamptons’ beach design, and instead think laid-back beach location with a slight mid-century feel. To compliment the Goodwood Victorian ash, IronAsh cladding and Australian Oak Engineered Flooring were specified to create a continuous flow of design from inside to out. Matching the timber throughout a space creates a harmonious atmosphere that connects each room cohesively. Specifying timber all from the one manufacturer like ASH means you are getting consistent grain and quality products throughout the entire build.

The Mark Moran Group recently opened their latest luxury retirement, aged care and wellness precinct in the exclusive Sydney suburb of Vaucluse. The complex is more reminiscent of a high-end boutique hotel than a traditional aged care facility, with its state-of- the-art gymnasium, restaurant-quality room service, luxury spa, cinema and a unique Digital Concierge service. Yet the facilities still retain a welcoming, homely feel – a combination of serenity and class, perfectly reflecting the iconic seaside suburb in which it’s located.

About the ProjectThis Child Health and Learning facility in Manly, deliversspecialist child healthcare for up to 15,000 families a yearfrom rural, regional and remote New South Wales andbeyond.The new facility will integrate a state-of-the-art child schooland health service that will accommodate regional childrenand families nationwide.This six storey building includes school classrooms,consultant and observation rooms, a paediatric oral healthunit with a dental and orthodontics room, ophthalmology,occupational therapy, sensory rooms and a telecare centre.ChallengeOver 80% of construction litigation and defect claims are a result of water ingress, of that 80%, almost 30% of those are below grade issues. (City Futures Research Centre UNSW).The two biggest waterproofing challenges for this build were:1) Below Grade - Non structural Blinding Slab, 4 metres below sea level and less then 50 metres from Manly Beach. This build had decanters pumping over 1.3 million litres of water per day awayfrom the site during the construction phase.2) The creation of a waterproofing solution which would not fail if the membrane was penetrated, be it in the pre or post construction phase.Due to the proximity to the beach and the build having a raft slab in the basement, a standard cookie cutter below-grade waterproofing solution was not an option for this build.Tremco SolutionTremco were asked to provide a solution for this complex build. The biggest and most demanding waterproofing areas within the build that needed attention were:1) Below Grade - 50 metres from the ocean and 4 metres below sea level, we needed a reliable waterproofing solution, that would also be robust enough to withstand any punishment tradesdelivered post installation, we recommended and used Paraseal SW (Saltwater). Paraseal SW is a multi-layer sheet membrane waterproofing system consisting of a self-sealing, expandable layer of bentonite laminated to an impermeable, high density polyethylene (HDPE).2) iAuditor reporting- iAuditor is an onsite quality assurance program Tremco conduct for the builder and applicator to ensure our products are being installed correctly and to specification. This gives the builder the confidence that there will be no waterproofing defects within the build.Overall, both the builder and developer were happy with the end result, which provided the warranty and quality required of such a development.

About the ProjectIn response to unprecedented demand, Rouse Garden is filling the void of modern-day homes close to trains, shops & jobs at the most competitive price on the market. Featuring the diversity of 1, 2 & 3 bedroom homes, there’s something for everyone in the most wondrous apartments to grace Rouse Hill. From floor to ceiling glass walls, timber hardwood flooring in your living room and a private rooftop garden terrace complete with BBQ and lounge areas. The quality of design is worthy of being marvelled at. Living rooms have been purposed to allow seamless indoor and outdoor transitions, blurring the boundaries between inside and out and elevating your home to new heights.ChallengeWhen you are building in one of the premier locations in Norwest Sydney, it’s all about the ding to match the lifestyle your new residents demand from your new community.  Presented with tight detail, the look, the feel and the performance of your build time-lines, and expectations of high quality, Hydraseal were tasked with working on Rouse Gardens. Waterproofing both the internals and roof of the building, the builder demanded warranties to match the project requirements and to deliver a quality finish demanded of this high profile project.To streamline this project, availability of stock and ease of application were key product requirements needed from the project, which Tremco were tasked with delivering.Tremco SolutionVulkem H2 Plus, Vulkem NEM, Tremflex50, Vulkem 951Hydraseal partnered with Tremco for a few reasons, primarily trust built up through a longstanding relationship provided the support necessary for the key for the success in this project.The versatility of Vulkem NEM being able to be used for internal wet areas, in conjunction with Vulkem H2, as well as for outdoor areas under Vulkem 951 NF allowed for fast and consistent application of waterproofing on the project, given the tight time frames, all backed with long warranties to match product performance.The combination of Vulkem NEM, Vulkem 951 NF and Vulkem H2 provided the warranties demanded by the builder which resulted in both Builder, and Applicator very satisfied with the job. 

LOCATIONPortsea, Victoria – AustraliaCOLLABORATIONArchitect: CarrBuilder: IB ProjectsDeveloper: Portsea Surf Life Saving ClubBRIEFPortsea Surf Life Saving Club was given an $8 million contemporary redevelopment where part of the brief was to protect the glass and external concrete to reduce maintenance costs and dirt build-up.ECOCLEAN were engaged to coat the building’s glass windows (including the observation room) and all external concrete with our protective Self-Cleaning Coating. The coated surfaces will self-clean and look as new with the added benefits of purifying the air the that comes in contact with.MATERIAL & APPLICATIONECOCLEAN Glass TreatmentECOCLEAN Self-Cleaning GlassECOCLEAN Porosity SealerECOCLEAN Self-Cleaning CoatingOUTCOMEThe redevelopment of the surf club not only brings the building into the present but our ecofriendly and sustainable coatings will keep the concrete and glass protected and clean well into the future.

SAS International provided an unusual feature perforation to a metal ceiling solution for Cork County Council’s redevelopment of their MOT office. The refurbishment of Cork County Council has created an outstanding open plan office for their upgraded MOT Office. Included in the redevelopment is the installation of 240 meters squared of acoustic SAS500, with a unique OB50 perforation, installed within the open plan office, meeting rooms and cellular offices. Conserving the original architectural features was significant when embarking on the reconstruction of the building. SAS500 was chosen to accommodate the spacing of existing structural beams, the system hung on secondary grids to adhere to specific architectural requirements. To adhere to the recent popularity in open soffit trends, SAS500 offers a solution in addition to providing acoustic absorption. A unique OB50 perforation was specified in the design of the baffles for this project. SAS International worked in collaboration with Cork County Council Architects and CField Construction to provide bespoke design solutions for this project.

Ireland’s second largest legal firm, Arthur Cox, has moved to its new headquarters, Ten Earlsfort Terrace, Dublin. Located a stone’s throw from St. Stephen’s Green, the LEED Platinum fit-out building is a marker of sustainable design. Architects, Scott Talon Walker, had a specific design requirement in mind so chose SAS International for their longstanding relationship and expertise. To accommodate the number of recurring apertures, Scott Talon Walker collaborated with SAS to create bespoke service panels within the SAS330 hinged mega panel tartan grid. The panel design features five unperforated squares which create a single unit capable of housing fire detectors, movement sensors and other electrical devices. These unique panels satisfy the client’s M&E stipulations, ensuring the building’s sustainable performance well into the future. Additional SAS systems installed include: SAS500 acoustic lighting baffles and SAS150. Both of these systems assure complete design flexibility and service maintenance in equal measure. Nominated for Fit Out Project of the Year – Large Office, SAS International has once again exceeded the mark to deliver premium metal ceiling solutions for its client.

Project Location: Amberley, Queensland, AUSTRALIA.In Amberley is one of the largest base facilities in Australia. The redevelopment works are valued at AU$331.5 million. New construction and refurbishment works to be undertaken include newliving-in accommodation, maintenance facilities, storage, working and training accommodation, a combined mess and a new physical fitness centre.The site is owned by an Australian Government Department. The Atlantis® Turf Cell® was supplied by Atlantis and was installed by Kennedy Projects Group in April 2009. The system is located at the playing fields on the south-western corner of Gannet St and Rosewood Road, Amberley, QLD.A vegetated swale surrounds the playing field. The swale is an open, shallow channel designed to slow runoff, filter it, and promote infiltration into the ground. Excess water moving through the soil profile is captured by Atlantis® Matrix® Tank – Single modules. The use of a swale to collected water results in smaller runoff volumes, lower peak discharge rates and cleaner runoff. The vegetation in swales, usually thick grass, helps to trap pollutants such as suspended solids and trace metals. The Atlantis Matrix modules extend 3m (10ft) wide under the swale for 110m (360ft).Water collected by the swale is collected in a stormwater harvesting tank located adjacent to the north-western corner of the playing field. Perforated corrugated plastic pipes used as subsurface drainage pipes extend for 1560m (5110ft) is also collected by the stormwater harvesting tank.The stormwater harvesting tank is located subsurface and is constructed of a heavy duty low density polyethylene liner and non woven geotextile surrounding Atlantis® Matrix® Tank - Double modules. The Atlantis stormwater tank has a 4,100m3 (144,80 ft3) capacity. Water collected by the swale and stormwater tank system is used for irrigation of the sports field.The Atlantis stormwater tank has eight (8) cleanout / inspection ports placed through the systems. A 1200mm (4ft) dia. wet well with bolt down lids has been installed adjacent to the tank serves as a pump out pit. The overflow from the tank has a 15m (50ft) long x 400mm (1.3ft) deep spill way with scour protection into an adjacent creek.

The Berkeley Hotel is a luxurious and iconic hotel, housed in the fashionable district of Knightsbridge, London. When renovations were required, Roger Stirk Harbour & Partners designed a glass façade entrance to the hotel. Boon Edam Ltd was consulted to provide a stylish entry solution to complement the updated lobby entrance and reflect the luxurious image of the Berkeley Hotel brand. Business Challenges The hotel entrance required a renovation which would give guests an instant welcome upon arrival, whilst also providing a practical function to meet access needs. For a hotel as prestigious as The Berkeley, first impressions are hugely important. The entrance and welcome given by a hotel provides the guest with an indication of what to expect from their stay, so therefore the entry solution was a key consideration within the renovation project. With a constant flow of visitors in and out of the lobby, the entrance door is vital in maintaining a comfortable climate and pleasant atmosphere for guests. As sliding or swinging doors bring in cold draughts, the specification called for a revolving door to keep out wind, noise and dust. The project architect specified that the door was to be fully automatic and made entirely of glass to match the newly renovated lobby. However, for a door to be fully automatic, there must be several sensors and buffers which would have impacted the all-glass aesthetic of the entrance. Boon Edam was appointed to provide a tailored solution which could meet all the specific functional requirements, without needing to compromise on the luxurious style and quality desired. The Boon Edam Solution A Custom Designed Crystal Tourniket Due to the high-end nature of The Berkeley Hotel, attention to detail was paramount. Multiple meetings were held with the architect to ensure that Boon Edam’s team of experts could fully capture all requirements to provide the perfect, bespoke solution. Boon Edam’s Crystal Tourniket door was selected for the entrance of The Berkley Hotel; one of the most impressive and eye-catching revolving doors available. A Crystal Tourniket is constructed almost entirely from glass, with added stainless steel accents to support the solidity of the door. The End Result The Berkeley Hotel is now home to a grand lobby entrance provided by Boon Edam, which utilises natural wood in the drum wall of the Crystal Tourniket revolving door to provide guests with a warm and elegant welcome. In combination with the all-glass door set and modern lighting, the bespoke solution truly reflects the prestigious Berkley Hotel brand.

Jewel on the Gold Coast (Jewel), a luxury development of three crystalline towers constructed on the internationally renowned Surfers Paradise beachfront, Gold Coast. Jewel consists of 513 apartments and a 169-room luxury hotel – a first of its kind on the Gold Coast. The towers with their distinctive glass curtain walling system, are the result of a collaboration between Oppenheim Architects and DBI Design. The fundamental design concept drew inspiration from three smoky quartz crystals that we discovered in the region. Jewel is inspired by the crystalline volcanic hook that forms the underlying structure at the coastline and, in particular, the Gold Coast’s iconic hinterland. Multiplex was awarded this prestigious project and commenced construction of this billion-dollar development in 2016. The Jewel is Australia’s largest beachfront mixed-use development and the first absolute beachfront development on the Gold Coast in more than thirty years. Tilecorp Pty Ltd. was awarded the tiling contract on the project that included the installation of 600 x 300 mm porcelain tiles in the public areas, travertine in the apartments, penny round mosaics on the walls in the public amenities, and cobblestone in the outdoor areas.

Imagine waking up in this 4-star luxury hotel with panoramic view of the IJ and the city of Amsterdam. Hotel Jakarta: a BREEAM Excellent certified energy-neutral hotel in Amsterdam. Designed with sustainability in mind. Unique for the Netherlands is the 30-meter-high timber structure of the hotel. All columns, ceilings and frames are made from natural, FSC or PEFC certified wood. The south and east façades are covered with 700 m2 of building-integrated solar energy panels (BIPV panels). The glass roof that covers the atrium also contains BIPV cells that, in addition to collecting energy, also function as sun blinds for the subtropical inner garden. The atrium is the center of the hotel and works as a temperature controller in both summer and winter. On each side of the building, rooms have their own covered outdoor space that functions as a structural awning. A custom made revolving door provides access to the hotel where there is a dynamic public area with various bars, restaurants, coffee corners and a wellness center. This transparent revolving door is almost 6 meters high and fits perfectly with the appearance of the facade. In addition, this type of entrance solution is in line with the sustainability requirements of the building.

The core function of a hospital is to attend to the physical, emotional, and mental needs of its patients. Also, the environment must be comfortable, clean, and serene to assist with a patient’s recovery. New Royal Adelaide Hospital (NRAH) is a perfect example of a state-of-the-art facility that provides a great service for city of Adelaide and surrounding regions.This 800-bed hospital is the largest hospital in South Australia. Sprawling across 25 acres, containing open green spaces throughout the precinct to assist with healing and relaxation, a commercial zone with underground car park and featuring a comprehensive range of clinical care to an estimated 85,000 inpatients and 400,000 outpatients each year.Many CS products were specified and installed in the development of the New Royal Adelaide Hospital. Our expansion joint covers were installed throughout the interior and exterior of the hospital, these expansion joint covers are critical for the development of the hospital to safely accommodate extreme building movement. An example would be the expansion joint SJHD, this seismic metal floor cover can be used in both interior and exterior settings and can provide 760mm of plus movement during a seismic event, and the expansion joint SGR is perfect for interior applications, it is hygienic and accommodates lightweight wheeled equipment, making it ideal for the NRAH. Our expansion joint covers offer a range of sizes, aesthetics, and performance variations. Each model perfectly suited for different environments.Our Acrovyn products were also installed throughout the NRAH. Acrovyn provides wall and door protection throughout the interior space of the building. In an environment like a hospital where there’s a lot of foot traffic and wheeled movement, it is imperative to have your walls protected from any potential impact. Our SCR-64N crash rail was installed throughout the hospital, mainly in the corridors to protect the walls from the bed carts. The HRB-10C, our handrail/crash rail combination is another product installed, which our ligature resistant featured component (a common feature used in behavioural health facilities) and the HRB-10C was supplied in both our Acrovyn Solid Colours and our Acrovyn Woodgrain as the handrail component. Throughout the hospital, the corners were also protected from damage by installing Acrovyn and Stainless-Steel corner guards. Both corner guards are a simple yet effective solution in protecting the vulnerable areas of the hospital. For hospital settings, Acrovyn is an environmentally friendly product, that is pleasing to the eye but also very functionable.The NRAH has been operating since 1841 and it was a privilege to have CS products featured throughout the hospital.

The Roads & Maritime Services (RMS) now benefit from a highly progressive workspace in their newly refurbished head office on Parramatta Street. The main aim of the refurbishment project was to improve facilities and collaborative spaces for staff and visitors. However, a significant challenge for the contractors was to keep all existing communications rooms fully operational throughout the project. Achieving the Aim: SAS800 Trucell ceilings were installed in the open plan lounges and stairwells of the renovation. Creating a grid of squares, strong lines stretch the length and breadth of the collaborative space. The system gives a decorative feature to the fit-out with the illusion of a much larger space for activity-based working. Comfortable lounge furniture and bright colours have also been chosen to encourage communication and create a flexible working space. Meeting the Challenge: Specified with a lay-in exposed grid, each tile slots in place without the need for gaskets or cutting. With the building in constant use, installation was quick and easy keeping the project on schedule with minimal disruption. Popular in Australian CBD property markets, the refit considers occupant well-being with Grade A ‘end of trip’ facilities. An upgraded lobby area also contributes to the value-added space with an improved experience for employees and visitors alike.

Mauritshuis is located in the heart of The Hague. It is famous around the world for its premium art collection. The intimate museum rooms of this 17th century monument display over two hundred excellent art works by Dutch and Flemish Masters. Boon Edam installed two special revolving doors in the museum's newly constructed section, one of which is a Tourniket that is 4.6 m high. The underground entrance foyer is actually located six meters below street level, but now with this renovation, as daylight penetrates from all sides, it feels very light and spacious. “Before the renovation, the museum’s entrance on the side of the building was rather cramped,” says architect Hans van Heeswijk at the press preview. In order to create a more generous reception area, he decided to move the main entrance under the forecourt of the listed, seventeenth-century Dutch Classicist house, which had to remain exactly the way it was. It was a feat in itself to connect two buildings underground and to lower the foundation of the new wing. The small surface area and the building's location right next to the Prime Minister's tower made this construction project quite complex. Boon Edam was honoured to supply two special automatic revolving doors that had to suit the new museum wings perfectly.

Orchard Manufacturing is an Australian health company that has been producing fruit-based laxatives under the Nu-Lax brand, since 1937.The organisation’s new state-of-the-art, purpose-built facility - located in the Victorian suburb of Rowville - delivers both superior function and out-of-the-box design as well as providing a new home for the long-time Melbourne-based manufacturer.To ensure the new facility’s processing and packaging zones met the strict hygiene standards, 1, 300 m2 of Flowfresh SR was installed in Warm Buff, Grey and a custom Aqua Blue shade.The HACCP Internationally certified Flowfresh SR system was chosen thanks to its seamless, antimicrobial finish as well as its abrasion and chemical resistant profile.Flowfresh SR provides excellent chemical resistance against detergents, oil ingredients, caustic soda, sugar syrups, methanol and a variety of acids. The system delivers excellent abrasion resistance against impact as well as sustained foot and trolley traffic.Flowfresh SR is resistant to thaw and thermal fluctuations from -40°C to +120°C, making it suitable for cool rooms and cold storage areas as well as those areas subject to high-temperature cooking processes and hot-water wash-downs. Slip resistance can be tailored to suit the individual needs of a given processing area.