"sheet roof claddings"

This project is a great example where the client wanted to realise the instant savings of Con-form Group’s engineer certified, rafter mounted system, over costly traditional mounting systems.With a mixture of our EasyMech MR (purlin-mounted), and Span+ (rafter-mounted), HVAC platforms - the client was able to successfully mount all mechanical units across the roof of this mixed-use development in Tasmania.Spanning over 9 metres, this retrofitted Span+ (rafter-mounted), installation answered the clients brief in more ways than one.Rated to 2.5kPa and attached to Con-form Groups proprietary steel stub columns – this platform and it’s screens were retrofitted to the roof of this shopping centre within 2 days.Paired with our Louvre airflow and Classic Screen Walls.

The £70 million project saw SAS International design and manufacture bespoke spun alum­inium profiled discs, acoustic metal wall panelling and System 600 rafts in the new terminal. The architects 3D Reid had to make the building light, airy and modern yet the façade and various materials used within the terminal had to withstand potential of a security breach. All products installed ‘land-side’ were required to meet the requirements of Aviation Security in Airport Development (ASIAD). The result answers aesthetic demands, yet provides the highest level of performance for the requirements of the building. For the design to be realised, square aluminium sheets were cut by the manufacturer into a circle and spun into a dome. Installation in such an environment means safety cables had to be attached to each disc, wall panel, tile and raft to ensure they do not fall and cause injury. Allowance for safety cables to be attached had to be taken into consideration during the design phase. Large vertical wall panels with an ultra-micro perforation were also specified to provide the necessary acoustic properties required for this vast open space. The very fine 0.7mm perforation, with 1% open area, helps to manage acoustics within the large open spaced terminal. The off-site modular manufacture of the architectural metalwork products meant installation was quicker, which causes less disruption to such a busy environment, and in addition there is no waste on site. Aesthetic versatility can be achieved using SAS International Architectural Metalwork throughout projects. It also allows for inte­gration of M&E services into the building design while meeting design demands and durability requirements. The range includes acoustic baffles, acoustic wall panels, air handling units, bespoke ceilings, and column casings.

A bold and significant new development has emerged in St Kilda as a ‘liveable Lego tower’, rising in tiered rainbow cubes that appear to balance like building blocks. Aptly named The Icon, the distinctive new building is wrapped in expanded aluminium mesh that changes colour as sunlight moves.The inspiration of artist Matthew Johnson, who worked with Jackson Clements Burrows Architects to conceptualise the distinctive complex, was achieved with Interpon Powder Coating on board as a collaborative partner.“My vision for the project was for people look up and see something interesting, to see something that is in a sense iconographic – as a marker or reference point,” explains Matthew.Interpon were involved with the project “right from the start”, explains Gareth Connell, Regional Specification, Interpon. Their association began after they were introduced to Pace Developments to discuss colour and product selection for the external façade.“We work closely with Interpon, and Pace asked us to quote with the product already powder coated,” says Ian Dunstan, southern regional sales manager at Locker Group, who manufacture perforated and expanded metal. Interpon were able to step in and develop the colour range separately, to meet the design brief and provide an ultra-durable coating system that meet the expectations of all parties.“The team at Interpon were very accommodating, engaged and professional in taking the concept on board,” says Matthew. “We were able to manifest unique colours based on the ratios I created with their chemist, inventing a whole new series of colours. This was crucial, as each level is depicted in different colour hue variations from earth to sky, which cross reference the nature of the geographical and environmental stratums. This flux of seasonal change is portrayed through subtle tonal gradation. Working with Interpon was a very fluid operation.”Interpon has collaborated on several high profile property developments and high rises over the years – although perhaps none quite as unique or with as many distinct characteristics as The Icon. “The nature of expanded aluminium mesh is such that it is formed by shearing and expanding aluminium sheet to create the ‘3D form’ effect. A visually appealing system for a façade, the shearing of the metal can present issues with very sharp edges, particularly in aggressive coastal environments,” Gareth explains.“Part of understanding this project was to comprehend as many elements as possible. Given the location was in St Kilda, with the bay just over 1.5km away, environmental considerations such as UV degradation, exposure to corrosive sea salts and prevailing winds needed to be considered.”After reviewing available data, such as Bureau of Meteorology weather patterns and local geography and topography maps, a specific duplex or two-layer powder finishing system was specified.“This consisted of a controlled preparation process for the expanded aluminium sheets. An epoxy barrier primer (was specified) to provide enhanced protection and to build the sharp edges in order to minimise issues associated with filiform corrosion. And the ultra-durability polyester powder top coat was developed in 34 distinct colours,” Gareth says.After the colour range was developed, it was applied by powder coating specialists Mansutti Bros. Lead by managing director Claude Mansutti, the team refinished hundreds of mesh panels over a period of nine months.“It was a major benefit to be using powder coating because, unlike liquid paints, powder is cured once it comes out of the oven and it’s ready to go once it’s cooled down. If they were painted, the drying phase could delay the process from refinish to installation by up to two weeks. It meant we were able to keep to a very strict schedule,” Claude says.“The project involved a lot of large spreadsheet work. There were 17 floors and over 30 colours, with panels in 15 sizes; it was quite a matrix to work with. But the end result is so different and so unique. It’s an interesting design and I’m sure it’s going to be a talking point for the area for many years.”

Monash University’s Clayton campus was recently awarded three major architecture awards by the Australian Institute of Architects for the second year running.The precinct consists of four new residential buildings with associated retail and informal learning spaces, with each of the buildings having its own individual architectural style.The project includes designs from four different architects including Hayball, Jackson Clements Burrows Architects (JCB), Richard Middleton Architects and McBride Charles Ryan, with master planning from MGS Architects and partners.Central to the design are the powder coated aluminium elements featured across each of the buildings, ranging from sharp blacks and silvers on one building through to bright and exuberant colours on another, driving home the individuality of each designer.Among the award winning designs, the Logan Hall residency, designed by McBride Charles Ryan was recognised by the judges for its excellence in architectural skill and merit of design. Interpon Black Ink was used for the shading devices and window frames, with Interpon Eternal Silver Satin specified for the weather panels above the ground floor retail.“As we were conscious of long term maintenance as well as creating an ongoing pleasing presence, the products used on the project were chosen for their intrinsic beauty and longevity,” says Debbie Ryan of McBride Charles Ryan.“The pattern is intentionally complex. We have used honest and time proven Interpon products which have all come together in a really joyful way through composition.”Having previously worked on the colourful The Icon apartment complex in St Kilda designed by JCB, Interpon’s Specification Expert Gareth Connell understands the importance of tailored palette when vibrancy and colour are central to a project.“We knew the design brief called for a exuberant range of colours for a wide range of building elements and performance of this aesthetic. We knew we’d have a proven high performance finishing solution that would maintain the performance requirements for such a high profile project, which is why Interpon D2525 Super Durable polyester powder coat was specified.”In contrast to the more ‘simple’ colour scheme used for Logan Hall, the Turner Hall building, designed by JCB, is defined by its bright colours, using a rainbow of ten different colours from the Interpon colour palette to create a vibrant and refreshing appearance that has revitalised the University as a whole, traditionally known for its dull brown buildings.A coloured ‘hood’ at the window of each sole occupant studio glows at night, enhancing the colour spectrum. Custom colours from the Interpon Ultriva™ collection were used for aluminium elements including extrusions, sheets, flashings, cladding, trims and fins.The complexities of the ambitious project required careful consideration and planning between the architects and powder coating supplier. The vibrant design brief lent itself to Interpon’s unique small batching facilities in Sunshine, Melbourne, that cater for such striking colour schemes in a cost effective and timely manner.Throughout the project, specialists from Interpon Powder Coatings worked closely with the multiple architectural teams involved in the project to ensure the perfect colour palette was developed for the best results both in individual building design and the project as a whole.In specifying the Interpon D2525 series, the designers were ensured significantly higher gloss retention and resistance to colour change along with maximum film integrity guaranteeing long term cosmetic and functional protection. Interpon D2525 offers 25 year film integrity and gloss retention with 15 year colour retention and chalking resistance.The Interpon D2525 range exceeds American Architectural Manufacturers Association Standards for High Performance Organic Coatings on Aluminium Extrusions and Panels as well as exceeding the performance criteria of AS 3715 Metal finishing – Thermoset powder coating for architectural applications of aluminium

Designed by Smart Design Studio, the building is an honest layering of old and new as expressed by the raw treatment of the exterior façade through to the smooth, modern interior. The rooftop addition connects the double-height banks of glass Breezway Louvres with an articulated aluminium roof folding down as a screen to the back of the building. The end result successfully incorporates flexible and functional office interiors and a two-bedroom rooftop apartment within a rigorously controlled contemporary architecture of old and new.

Designed by Benson McCormack Architects and built by Hone Constructions. The curved glass elements seen at the ground level entry shopfronts and in the feature penthouse facades are key to the undulating design which becomes the signature for the “Wave” Apartments building. In particular the projecting curved façade at each end of the penthouse roof level is a major element of the architectural design and a feature that can be seen from afar. The sweep of the concrete rood appears to float above the skin of curved glass creating a dramatic visual effect.

CollaborationArchitects: HassellBuilder: ADCO ConstructionsBrief Protection of the carpark’s white appearance from staining, soiling and future graffiti strikes.Material & ApplicationECOCLEAN Porosity SealerECOCLEAN Self-Cleaning CoatingOutcomeAfter a number of years since application, the car park continues to self-clean and keep its as-new white appearance through the photocatalytic properties of our ECOCLEAN dual coating system. Harmful compounds are continuously broken down when they come into contact with a coated surface in addition to benefiting from graffiti resistance.Testimonial“This is an example of our functional and protective coatings removing the barriers to having white or fair-faced concrete or cladding in building designs. Their self-cleaning, anti-carbonation, anti-fungal, and graffiti resistant properties mean buildings look as good as new, enabling fresher and lighter colours to be more prevalent in our built environment.”Tony Watling, CEO ECOTONE & ECOCLEAN, Australia & New Zealand

Ivanhoe’s newest building is a landmark you can’t miss. The facade components of light bricks, dark cladding and luminous aluminium Click-on Battens perfectly complement each other, creating a contemporary finish. The interior also features our battens, which seamlessly connects to the exterior. The building comprises a three-level basement, ground floor retail outlets, two levels of offices and multiple fully appointed apartments among the two upper levels. The building is bordered on three sides by busy public roads which posed logistical challenges with its construction. However, the speed and ease of installing Click-on Battens alleviated this issue on the upper levels. The curved facade is wrapped in Sculptform aluminium Click-on Battens. They were installed upon standard and curved tracks which were delivered to site in a flexible state so that they’re able to be wrapped around the substrate and hug the exterior. Batten clips are factory fixed to the tracks at the spacing sequence that is specified. Helping to save time installing on-site. Battens are simply push-clicked onto mounting tracks that are positioned behind the battens in a concealed manner.

The 52mm drainage cell has been used as normally in two guises. Firstly as a TurfcellTM grass reinforcement such as at Natural Designer Homes , a display home in Casuarina NSW. The photograph of the driveway is from about 1year ago, some 4 years from installation. As there are several cars in the family as well as work trucks the installation looks quite good.Secondly as a Gravel cellTM gravel retainer, such as that used at Leaf and Limb Nursery in Kin Kin Qld., where they use the 52mm cell in the walkways as this makes it easier for them to run the trolley through the gravel.However there is a third use for the 52mm drainage cell. That is as walk ways in mining camps. Traymark Industrial Caravans make the vans for accommodation for the workers and Atlantis® 52mm cells are supplied with each van to be used as a walk way to keep workers out of the mud and dirt when at their accommodation..Secondly as a Gravel cellTM gravel retainer, such as that used at Leaf and Limb Nursery in Kin Kin Qld., where they use the 52mm cell in the walkways as this makes it easier for them to run the trolley through the gravel.Now for another use: a client already was successfully using our 52mm drainage cell as reinforcement for parking bays beside a river and in August 2011, it occurred to him that he could extend the parking area into a boat ramp. Our 52mm drainage cell is made from recycled polypropylene with U. V. protection, in sheets being 480mm x 260mm x 52mm.Two tracks, being 0.96m in width were connected to the 52mm drainage cell in the parking area and also were secured by metal hook pegs to the drainage cell of the parking area. The tracks lead to a full width ramp (2.88m in width) into the water.To prevent the ramp from sinking fully into the silt, the ramp and adjacent section of the two tracks are formed by two layers of 52mm drainage cell connected to each other by cable ties. Metal hook pegs were also used to assist in holding the ramp in position.We contacted our client in August 2017 and he is very happy with the boat ramp which is still in use despite several floods, and constant exposure to the elements.Thus the high load bearing of approximately 4000t/sq. M and the long useful life of the 52mm drainage cell has permitted the 52mm drainage cell to be used and still being used in many ways.

About the ProjectThis Child Health and Learning facility in Manly, deliversspecialist child healthcare for up to 15,000 families a yearfrom rural, regional and remote New South Wales andbeyond.The new facility will integrate a state-of-the-art child schooland health service that will accommodate regional childrenand families nationwide.This six storey building includes school classrooms,consultant and observation rooms, a paediatric oral healthunit with a dental and orthodontics room, ophthalmology,occupational therapy, sensory rooms and a telecare centre.ChallengeOver 80% of construction litigation and defect claims are a result of water ingress, of that 80%, almost 30% of those are below grade issues. (City Futures Research Centre UNSW).The two biggest waterproofing challenges for this build were:1) Below Grade - Non structural Blinding Slab, 4 metres below sea level and less then 50 metres from Manly Beach. This build had decanters pumping over 1.3 million litres of water per day awayfrom the site during the construction phase.2) The creation of a waterproofing solution which would not fail if the membrane was penetrated, be it in the pre or post construction phase.Due to the proximity to the beach and the build having a raft slab in the basement, a standard cookie cutter below-grade waterproofing solution was not an option for this build.Tremco SolutionTremco were asked to provide a solution for this complex build. The biggest and most demanding waterproofing areas within the build that needed attention were:1) Below Grade - 50 metres from the ocean and 4 metres below sea level, we needed a reliable waterproofing solution, that would also be robust enough to withstand any punishment tradesdelivered post installation, we recommended and used Paraseal SW (Saltwater). Paraseal SW is a multi-layer sheet membrane waterproofing system consisting of a self-sealing, expandable layer of bentonite laminated to an impermeable, high density polyethylene (HDPE).2) iAuditor reporting- iAuditor is an onsite quality assurance program Tremco conduct for the builder and applicator to ensure our products are being installed correctly and to specification. This gives the builder the confidence that there will be no waterproofing defects within the build.Overall, both the builder and developer were happy with the end result, which provided the warranty and quality required of such a development.

Acrovyn by Design® from Construction Specialties, was specifically chosen for the new Veterinary Specialist Services (VSS) Hospital in Jindalee, Brisbane, Queensland. The overall objective of the project was to create a bright and welcoming space, as well as an extremely hygienic care environment for the veterinary doctors and staff, the patients (pets) and their owners.The combination of both functionality and design flexibility available with Acrovyn by Design® has allowed the creative “cute pet theme” to be installed behind the wash basins as splash-backs. The images used include a collection of cute animals such as kittens and puppies, which could very easily be executed with the design flexibility and functionality of Acrovyn by Design® wall panel sheets.Veterinary hospitals and lobbies are high traffic environments with a significant amount of equipment, including trolleys and stretchers that can scrape or bump against walls. In addition, they have strict cleaning requirements for high hygiene standards that often requires the use of harsh chemicals, such as bleach, to disinfect hard surfaces.The client’s mission statement is to “provide the best possible care”. To this end, they have 4 different locations around Queensland all operating a 24-hour referral and emergency animal hospital. All facilities have state-of-the-art equipment with experienced and helpful staff. The first of the four hospitals opened to the public in 2000.Acrovyn by Design® has a proven reputation as the preferred choice with many major hospital projects across Australia, including The Royal Hobart Hospital, The Memorial Hospital Adelaide, The Royal Melbourne Hospital and Adelaide’s Calvary Hospital to name a few. It is wonderful to see that the unique qualities of Acrovyn by Design® are now being recognized as suitable for use in the care of our much-loved pets undergoing veterinary care as well.Did you know that the number of Australians who are adopting or fostering pets since the COVID-19 restrictions were introduced has exploded? According to the RSPCA, many people are now adopting pets because they feel that they finally have the time to settle a new animal into their home. It is also believed that home isolation has increased the desire among many single people for a companion. The RSPCA has reported a 45% increase in dog adoptions and a 20% increase in cat adoptions since COVID19 began.Consider Acrovyn by Design® for your next project; for design flexibility, impact resistance and easy to clean maintenance in veterinary hospital environments. In addition, Acrovyn by Design® allows for fast installation when faced with tight project schedules in 24/7, critical care operating workplaces.

Ferrero’s new global HQ gathers in one building with nearly 1,300 people, previously spread over five different offices. The building, with a total floor space of almost 30,000 m², opened in December 2019. The building is designed to evoke the atmosphere of an Italian square: a vast atrium is surrounded by two multi-storey office wings. Boon Edam was appointed to craft and install the golden revolving door, on behalf of facade builder Groven + Portal, who in turn worked for general contractor Felix Giorgetti. The colour of the revolving door makes a visual reference to the world-famous golden chocolate - Ferrero Rocher. The Casa Ferrero administrative building consists of two blocks built on a common basement. It was the combination of these plots, and the architectural skills, that resulted in what you see today: a building that is both impressive and elegant as well as being a pleasant and functional workplace for the employees of the food group. Ferrero’s colours are subtly incorporated into the classic facades, with bronze tones and a gilded effect over the windows as well as the entrance glass panels. This effect was achieved by applying a gold-coloured textile fabric to the laminated glass during the project’s construction. Behind the glass facade of the entrance, the most jaw-dropping area of Ferrero’s headquarters unfolds - a central atrium that connects the two blocks and is entirely covered by a glass roof. The spacious atrium is designed to function as a reception and meeting space. Horizontal circulation between the two blocks is facilitated by connecting walkways with a range of 20 meters. The vertical circulation occurs through panoramic glass elevators. The central atrium’s glass-roofed space is open to life within the company and encourages interaction between employees. This 11-storey building, including six upper levels (ground floor + 5 floors) and five lower levels, adapts perfectly to its urban surroundings. The office areas are spread over nine floors, taking advantage of maximum light for the interior space. Levels -3 to -5 include technical areas and parking spaces. Ferrero’s wish was for a functional and pleasant building for everyone who works there. We think they have achieved this in spades!

Imagine waking up in this 4-star luxury hotel with panoramic view of the IJ and the city of Amsterdam. Hotel Jakarta: a BREEAM Excellent certified energy-neutral hotel in Amsterdam. Designed with sustainability in mind. Unique for the Netherlands is the 30-meter-high timber structure of the hotel. All columns, ceilings and frames are made from natural, FSC or PEFC certified wood. The south and east façades are covered with 700 m2 of building-integrated solar energy panels (BIPV panels). The glass roof that covers the atrium also contains BIPV cells that, in addition to collecting energy, also function as sun blinds for the subtropical inner garden. The atrium is the center of the hotel and works as a temperature controller in both summer and winter. On each side of the building, rooms have their own covered outdoor space that functions as a structural awning. A custom made revolving door provides access to the hotel where there is a dynamic public area with various bars, restaurants, coffee corners and a wellness center. This transparent revolving door is almost 6 meters high and fits perfectly with the appearance of the facade. In addition, this type of entrance solution is in line with the sustainability requirements of the building.

The first installation in Australasia has been completed of Boon Edam’s Circleslide architectural curved automatic sliding doors that elegantly cater to access for disability needs of modern and traditional buildings. The Circleslide installation for Mark Moran Group at Pacific Highway Warrawee on Sydney’s North Shore provides a prestigious, weather-protected entrance to a development of up-market aged care accommodation built by Next Group for Benson McCormack Architecture.  The door’s practical advantages also apply to a wide range of buildings in Australia and New Zealand, including commercial and public and private facilities, including offices, aged care, health, hospitality, restaurant, retail, tourist and transport facility uses, says Boon Edam Australia Managing Director, Michael Fisher.Circleslide installations consist of two sets of curved sliding doors – one on each of the entrance and exit sides – to provide a larger opening than traditional sliding doors, and retaining the elegant shape of revolving doors. This extra space is a major advantage for people with a disability, or those that require mobility aids. Enhanced accessibility Circleslide curved automatic sliding doors provide spacious and comfortable access for everyone using them including especially people with disability and their carers, and particularly people those with mobility issues who rely on wheelchairs, mobility scooters, wheeled walkers and other mobility devices commonly used in workplaces and public facilities. “Access to public and private facilities is an important and increasing issue for more than five million Australians and New Zealanders living with disabilities. This growing sector of the population includes the higher proportion of older people with limited mobility, including more than 750,000 Australasians who use mobility aids,” says Mr Fisher. “Where building professionals seek to provide for such people but want to retain the prestigious shape and functionality of revolving doors, Circleslide doors are an ideal solution that provides the additional capacity required,” he says. Circleslide doors complement Boon Edam’s global ranges of revolving doors, which is one of the world’s most comprehensive ranges. Their elegant design and access control functionality are preferred by architects, builders and designers for Fortune 500 companies in 27 countries. Customisable features The Circleslide door has an optional “winter mode” whereby only one sliding door opens at a time, which can reduce HVAC losses and contribute to the overall sustainability of the building. Like all Boon Edam revolving doors, Circleslide is available in a wide variety of colours and finishes, so it can be customised to the look and feel of contemporary and period buildings. The self-learning technology incorporated in the curved sliding door mechanism ensures extremely quiet and smooth movement of the doors. Options include: Interlocking modeConnection to external alarm system (e.g. fire alarm, smoke detector)Push-button free outKey impulse switchDirection sensitive motion detectorsGlass protection sheetsFloor matsAuthorised night entry·        Air curtain technology to create a barrier of air flowing from the revolving door’s canopy or sides to further extend revolving doors’ built-in advantage of excluding heat or cold to save HVAC costs through their unique always-open, always-closed configuration.  Night Locking Options include an electromechanical lock that can be unlocked with a key or by means of an optional key impulse switch.

About the ProjectIn response to unprecedented demand, Rouse Garden is filling the void of modern-day homes close to trains, shops & jobs at the most competitive price on the market. Featuring the diversity of 1, 2 & 3 bedroom homes, there’s something for everyone in the most wondrous apartments to grace Rouse Hill. From floor to ceiling glass walls, timber hardwood flooring in your living room and a private rooftop garden terrace complete with BBQ and lounge areas. The quality of design is worthy of being marvelled at. Living rooms have been purposed to allow seamless indoor and outdoor transitions, blurring the boundaries between inside and out and elevating your home to new heights.ChallengeWhen you are building in one of the premier locations in Norwest Sydney, it’s all about the ding to match the lifestyle your new residents demand from your new community.  Presented with tight detail, the look, the feel and the performance of your build time-lines, and expectations of high quality, Hydraseal were tasked with working on Rouse Gardens. Waterproofing both the internals and roof of the building, the builder demanded warranties to match the project requirements and to deliver a quality finish demanded of this high profile project.To streamline this project, availability of stock and ease of application were key product requirements needed from the project, which Tremco were tasked with delivering.Tremco SolutionVulkem H2 Plus, Vulkem NEM, Tremflex50, Vulkem 951Hydraseal partnered with Tremco for a few reasons, primarily trust built up through a longstanding relationship provided the support necessary for the key for the success in this project.The versatility of Vulkem NEM being able to be used for internal wet areas, in conjunction with Vulkem H2, as well as for outdoor areas under Vulkem 951 NF allowed for fast and consistent application of waterproofing on the project, given the tight time frames, all backed with long warranties to match product performance.The combination of Vulkem NEM, Vulkem 951 NF and Vulkem H2 provided the warranties demanded by the builder which resulted in both Builder, and Applicator very satisfied with the job.