NBS Source
I'm a manufacturer

"partidas de goiás x flamengo Jogabilidade (URL:br001.vip)💯ytmjw.html"

396 results found

Sort by:

Showing 1-16 of 16

Sponsored
Iconic Maison de l’Ordre des Avocats fire-protected by Hempafire Pro 315

Iconic Maison de l’Ordre des Avocats fire-protected by Hempafire Pro 315

Hempel

With a glass façade symbolising the transparency of justice and a glossy metal exoskeleton, the new Maison de l’Ordre des Avocats (House of the Paris Bar Association) is a stunning addition to the French capital’s new Batignolles judicial city. For the building owner, safety is a top priority. Therefore, the exoskeleton needed a proven passive fire protection coating that would enable the steel to maintain its load-bearing capacity for up to 60 minutes during a fire, giving those inside valuable extra time to evacuate.The challenge Specialist paint application and surface treatment company ROTH & Cie was contracted to apply the passive fire protection coating system. ROTH & Cie has worked with Hempel for many years and was keen to work with us on this project. However, due to the project schedule, the tubular exoskeleton framework was delivered to the construction site with a competitor’s epoxy primer already applied. ROTH & Cie therefore wanted a Hempel passive fire protection system that would work with the existing primer. Also, as building aesthetics are important in the overall design, the exoskeleton needed a high-quality matt satin finish. The solution Our solution was to specify a system of Hempafire Pro 315 and Hempathane 55750. A single component intumescent coating, Hempafire Pro 315 complies with the EN 13501-2 standard for the fire classification of construction products. It is optimised to provide 60 minutes of passive fire protection, as well as partial protection up to 90 minutes. In addition, thanks to its exceptionally low loadings, Hempafire Pro 315 requires significantly lower dry film thicknesses than competitor products. As a result, ROTH & Cie could apply the coating in a thinner coat, significantly reducing paint consumption, application time and project costs. The full system was completed with Hempathane 55750, a polyurethane topcoat with quick crosslinking properties that provides the matt satin appearance required by the specifications. Our dedicated passive fire protection R&D Centre in Barcelona, Spain verified that Hempafire Pro 315 could be applied on top of the existing primer. The entire system was spray applied using an electric airless pump, which is ideal for construction sites as it does not require an air compressor. The project is just another in a long line of successful collaborations with ROTH & Cie, which also include previous passive fire protection coating projects, most notably La Halle Secrétan covered market and La Samaritaine department store, both in Paris.At a glance Project Name: Maison de l’Ordre des Avocats (House of the Paris Bar Association) Customer: ROTH & Cie System: Hempafire Pro 315 + Hempathane 55750 Volume: 4,080 litres
Sponsored
Louvre Museum Expo - Duc de Luynes, France

Louvre Museum Expo - Duc de Luynes, France

Guardian Glass (Australia)

In museums, glass displays protect valuable artefacts from damage or distress, whilst presenting them in the best possible light. Sometimes the glass itself can act as an obstruction to the view. Unwanted glare, reflections or reduced lighting levels can obstruct visitors’ views through the glass, preventing precious works of art from being seen clearly and in their original colour and detail.
Sponsored
Bunnings Warehouse Keperra, QLD

Bunnings Warehouse Keperra, QLD

Metroll

Designed by Group 4 Architects and built by De Luca Corporation the project includes: the Bunnings Warehouse building (17,719sqm), and three other separate buildings .Metroll is proud to have been involved in the supply of many Bunnings Warehouse projects including the Keperra store.
Sponsored
Vision on Morphett, SA

Vision on Morphett, SA

Rondo Building Services Pty Ltd

Working closely with SA Master Plaster as the internal drywall contractor Rondo has supplied 64 & 92mm x 0.70BMT and 92mm x 1.15BMT wall studs for the internal wall framing with over 1,000 studs being required per floor. Also the project is utilising Rondo KEY-LOCK concealed plasterboard framing for ceilings and over 2,000m2 of the external Rondo MAXIframe wall system.
Sponsored
University of Sydney Queen Mary Building

University of Sydney Queen Mary Building

RBA Group

The University of Sydney Queen Mary Building features the following RBA products:B2890 – Jumbo Toilet Roll HolderB2111 – Vertical Soap DispenserB2112 – Horizontal Soap DispenserB262 – Paper Towel DispenserB1658 1639 – Accessible Compliant MirrorRBA4090-301 – 90° RH + 300 Straight Grab Rail SetRBA4000-090 – 900mm Straight Grab RailRBA4177-161 – Aluminium Shower Curtain TrackRBA4177-999-002 – Taffeta Shower CurtainRBA4090-450 – 90° Ambulant Grab RailRBA4000-060 – 600mm Straight Grab RailB819687 – Folding Shower SeatB683 x 24 – Stainless Steel ShelfB295 x 14 – Accessible Compliant Shelf
Sponsored
IKEA Majura

IKEA Majura

RBA Group

The IKEA Majura features the following RBA products:RBA4150-230 – 90° Wraparound Grab Rail & Backrest, Left HandB686 – Double Toilet Roll HolderB2111 – Vertical Soap DispenserB295 x 14 – Accessible Compliant ShelfB542 – Cubicle HookKB200-01SS – Koala Kare Baby Change Table | Stainless VeneerRBA4090-450 – 90° Grab Rail, Ambidextrous | AmbulantB2892 – Jumbo Twin Toilet Roll Holder
Sponsored
Santiago Airport, Spain

Santiago Airport, Spain

SAS International Australia

A Tricell system was designed by SAS International to fit the "Y" shaped departure lounge at Santiago Airport. SAS International has designed, manufactured and installed metal ceiling solutions for both interior and exterior areas of the new 74,000m² terminal of the Aeropuerto de Santiago, Spain. SAS810 tricell has been installed to create a triangular aesthetic in the departure lounges. This open cell system provides a geometric form that can easily be repeated for a striking finish. The flexible approach in SAS International’s design process enabled this unique solution to fit within the ‘Y’ shaped designed departure lounge. Installed in the main terminal and baggage hall, as well as exterior ceiling areas, is the linear profile system SAS710. The linear slat ceiling, designed so that each slat lines up neatly with the next, forms a perfect row resulting in clean and simple architectural lines. SAS710 was also chosen for the exterior of the building to provide continuity of design. Using specially designed slat retaining angles, the system has been adapted for strength and durability to prevent slats from being dislodged in high wind.
Sponsored
Sir Edward Weary Dunlop Retirement Village, VIC

Sir Edward Weary Dunlop Retirement Village, VIC

Rondo Building Services Pty Ltd

The Sir Edward Weary Dunlop Retirement Village has been completed with the help of architect, builder and contractor Ryman Healthcare. The 134-unit age care facility will house serviced care units and independent living units for the elderly with resort-style facilities. Rondo assisted in the development of this project, supplying a number of products including Stud and Track (64mm and 92mm x 0.55BMT), KEY-LOCK Suspended Ceiling Systems and MAXIjamb Systems for the large window and door openings leading onto balconies.
Sponsored
Waverley Residence, NSW

Waverley Residence, NSW

Bent & Curved Glass

Designed and built by C Plus C Architectural Workshop. Large format curved glass panels up to 2400mm high x 3500mm girth have been manufactured by Bent & Curved Glass in a variety of glass types to meet the design requirements for thermal performance, privacy, night lighting effects while also maximising natural light and a sense of space and openness. Early consultation between architect, glass manufacturer and frame fabricator and a process of glass sampling, review and selection created the best project outcomes. The quality of these glass elements has made a significant contribution to the success of this exceptional project.
Sponsored
Altona Dog Beach Showers, VIC

Altona Dog Beach Showers, VIC

BRITEX Metal Products

Commissioned by Hobson Bay City Council as part of the PA Burns Reserve and Altona Dog Beach Upgrade, Britex supplied a set of purpose built, custom designed Vandal Resistant Stainless Steel Dog Showers. Accessible Drinking Fountains with additional Dog Bowl were also supplied. The Customised Britex Dog Shower supplied included: 4 x Vandal Resistant Stainless Steel Square Dog Showers Manufactured from Marine Grade Stainless Steel Various heights supplied, 800mm and 1200mm options Integrated Lead Connectors • Vandal Resistant Time Flow Tapware Multiple Shower Sets installed at different heights for small and big dogs Integrated Safety Grab Rails
Sponsored
Permeable Car & Trailer Park

Permeable Car & Trailer Park

Atlantis

Snapper Creek Car Park was developed as an environmentally friendly permeable car park. As such the Atlantis® Turf CellTM and Atlantis® Gravel CellTM systems were chosen, to provide gravel driveways and grass parking areas, thus preventing compaction of the soil and to protect the grass and to stabilize the gravel and provide a permeable car park.The parking areas were divided into car only parking and car & trailer parking.The area, consisting of natural sandy material, was excavated to a depth of 300mm, and a tensar grid was placed into the excavation and the excavated material placed back on top of the tensar grid and compacted.A layer of 100mm of gravel was then place on the areas where the Atlantis® Gravel CellTM modules were to be used and the Atlantis® Gravel cellTM modules positioned thereon and filled with gravel.The Atlantis® Turf CellTM modules were installed and filled with soil and then the area was grass seeded; no turf was used. The project was completed in mid 2014 and was at that stage semi grassed and in use.The project required 4,300sq. m of Atlantis® 52mm drainage cell, which are 480mm x 260mm x 52mm panels and have a rigid interlocking clipping system and are made from recycled polypropylene.In August 2017, the operators of the car park, which is still operating, were contacted and they stated that they were extremely happy with the condition of the car park, even though it has heavy traffic as there is a boat ramp there, and some areas have been flooded by Snapper Creek.The Atlantis® Turf CellTM & Atlantis® Gravel CellTM systems are specifically suited for car parks, access roads, aircraft taxiways and helicopter landing pads as it has the following features:a high load bearing of approximately 4000t/sq. M;protects the root system from compaction, while allow for vigorous horizontal and vertical root growth;permits surface water absorption and infiltration; andhave a long use life.
Sponsored
Macquarie University Car Park Turf Cell

Macquarie University Car Park Turf Cell

Atlantis

APPLICATION: 52mm Turf CellPROJECT LOCATION: North Ryde NSWPROJECT DETAILS: Macquarie University Permeable Overflow Car ParkPROJECT COMPLETION: March 2017Established in 1964, Macquarie University began as a bold experiment in higher education. Built to break from traditions: to be distinctive, progressive, and to be transformational. Today its pioneering history continues to be a source of inspiration as they celebrate their place among the best and brightest minds.When Macquarie University’s existing cark park became too small for the amount of cars now using it, it was decided to construct an overflow car park. However, not just any car park, but in keeping with their innovative thinking, an environmentally friendly permeable car park. Of course the Atlantis® Turf CellTM system was chosen, so that turf covered parking spaces could be provided.The project required 9,843sq. m of Atlantis® Turf CellTM system, which is constructed from 480mm x 260mm x 52mm panels and has a rigid interlocking clipping system and is made from high quality recycled polypropylene. The project was undertaken by J & G Excavations and Asphalting (NSW) Pty Ltd.The Turf CellTM cells were laid on a bed of permeable soil, and filled with sandy soil and turf was then placed on top of the linked Atlantis® Turf CellTM cells and rolled with a heavy roller to press the roots into the soil in the cells, where they were protected from compaction and could grow freely both horizontally and vertically.The Turf CellTM system is another Atlantis invention, and is specifically suited for car parks, access roads, aircraft taxiways and helicopter landing pads as it has the following features:a high load bearing of approximately 4000t/sq. M;protects the root system of grass from compaction, while allow for vigorous horizontal and vertical root growth;permits surface water absorption and infiltration;has a long use life; andaesthetically, the system allows the grass to fill in completely, creating a lush lawn with an invisible reinforcement structure.
Sponsored
Versatile 52mm Drainage Cell

Versatile 52mm Drainage Cell

Atlantis

The 52mm drainage cell has been used as normally in two guises. Firstly as a TurfcellTM grass reinforcement such as at Natural Designer Homes , a display home in Casuarina NSW. The photograph of the driveway is from about 1year ago, some 4 years from installation. As there are several cars in the family as well as work trucks the installation looks quite good.Secondly as a Gravel cellTM gravel retainer, such as that used at Leaf and Limb Nursery in Kin Kin Qld., where they use the 52mm cell in the walkways as this makes it easier for them to run the trolley through the gravel.However there is a third use for the 52mm drainage cell. That is as walk ways in mining camps. Traymark Industrial Caravans make the vans for accommodation for the workers and Atlantis® 52mm cells are supplied with each van to be used as a walk way to keep workers out of the mud and dirt when at their accommodation..Secondly as a Gravel cellTM gravel retainer, such as that used at Leaf and Limb Nursery in Kin Kin Qld., where they use the 52mm cell in the walkways as this makes it easier for them to run the trolley through the gravel.Now for another use: a client already was successfully using our 52mm drainage cell as reinforcement for parking bays beside a river and in August 2011, it occurred to him that he could extend the parking area into a boat ramp. Our 52mm drainage cell is made from recycled polypropylene with U. V. protection, in sheets being 480mm x 260mm x 52mm.Two tracks, being 0.96m in width were connected to the 52mm drainage cell in the parking area and also were secured by metal hook pegs to the drainage cell of the parking area. The tracks lead to a full width ramp (2.88m in width) into the water.To prevent the ramp from sinking fully into the silt, the ramp and adjacent section of the two tracks are formed by two layers of 52mm drainage cell connected to each other by cable ties. Metal hook pegs were also used to assist in holding the ramp in position.We contacted our client in August 2017 and he is very happy with the boat ramp which is still in use despite several floods, and constant exposure to the elements.Thus the high load bearing of approximately 4000t/sq. M and the long useful life of the 52mm drainage cell has permitted the 52mm drainage cell to be used and still being used in many ways.
Sponsored
Diamond Creek Rotary Tram Project, VIC

Diamond Creek Rotary Tram Project, VIC

BRITEX Metal Products

The brand new public amenties as part of the Diamond Creek Tram Project and larger Diamond Creek Regional Play Space incorporates a number of Britex’ Signature Vandal Resistant Stainless Steel fittings and fixtures. These include: •Britex S.S. Centurion Accessible Toilet Pan (PCD) supplied with Black Vandal Resistant Closed Front Toilet Seat (SVRC-B) •Britex S.S. Centurion Ambulant Toilet Pan (PCAM) supplied with Black Vandal Resistant Closed Front Toilet Seat (SVRC-B • Multiple Britex S.S. In Wall Cisterns with Raised Accessible Buttons (FIW-D453) •Multiple Britex S.S. In Wall Cisterns with Low Profile Standard Buttons (FIW-S453) •Britex Adjustable Straight Arm Backrest (BTX-BR-S) •Britex S.S. Accessible Hand Basin (HBDA) •Britex S.S. Security Hand Basin complete with Security Tapware •Britex S.S. Security Mirror 1000mm x 450mm (SMIR) •Multiple Britex S.S. 90 Degree Ambulant Grab Rails (BTR-01-058)
Sponsored
Jewel - Gold Coast

Jewel - Gold Coast

Mapei Australia Pty Ltd

Jewel on the Gold Coast (Jewel), a luxury development of three crystalline towers constructed on the internationally renowned Surfers Paradise beachfront, Gold Coast. Jewel consists of 513 apartments and a 169-room luxury hotel – a first of its kind on the Gold Coast. The towers with their distinctive glass curtain walling system, are the result of a collaboration between Oppenheim Architects and DBI Design. The fundamental design concept drew inspiration from three smoky quartz crystals that we discovered in the region. Jewel is inspired by the crystalline volcanic hook that forms the underlying structure at the coastline and, in particular, the Gold Coast’s iconic hinterland. Multiplex was awarded this prestigious project and commenced construction of this billion-dollar development in 2016. The Jewel is Australia’s largest beachfront mixed-use development and the first absolute beachfront development on the Gold Coast in more than thirty years. Tilecorp Pty Ltd. was awarded the tiling contract on the project that included the installation of 600 x 300 mm porcelain tiles in the public areas, travertine in the apartments, penny round mosaics on the walls in the public amenities, and cobblestone in the outdoor areas.
Sponsored
Rainwater harvesting for a government facility

Rainwater harvesting for a government facility

Atlantis

Project Location: Amberley, Queensland, AUSTRALIA.In Amberley is one of the largest base facilities in Australia. The redevelopment works are valued at AU$331.5 million. New construction and refurbishment works to be undertaken include newliving-in accommodation, maintenance facilities, storage, working and training accommodation, a combined mess and a new physical fitness centre.The site is owned by an Australian Government Department. The Atlantis® Turf Cell® was supplied by Atlantis and was installed by Kennedy Projects Group in April 2009. The system is located at the playing fields on the south-western corner of Gannet St and Rosewood Road, Amberley, QLD.A vegetated swale surrounds the playing field. The swale is an open, shallow channel designed to slow runoff, filter it, and promote infiltration into the ground. Excess water moving through the soil profile is captured by Atlantis® Matrix® Tank – Single modules. The use of a swale to collected water results in smaller runoff volumes, lower peak discharge rates and cleaner runoff. The vegetation in swales, usually thick grass, helps to trap pollutants such as suspended solids and trace metals. The Atlantis Matrix modules extend 3m (10ft) wide under the swale for 110m (360ft).Water collected by the swale is collected in a stormwater harvesting tank located adjacent to the north-western corner of the playing field. Perforated corrugated plastic pipes used as subsurface drainage pipes extend for 1560m (5110ft) is also collected by the stormwater harvesting tank.The stormwater harvesting tank is located subsurface and is constructed of a heavy duty low density polyethylene liner and non woven geotextile surrounding Atlantis® Matrix® Tank - Double modules. The Atlantis stormwater tank has a 4,100m3 (144,80 ft3) capacity. Water collected by the swale and stormwater tank system is used for irrigation of the sports field.The Atlantis stormwater tank has eight (8) cleanout / inspection ports placed through the systems. A 1200mm (4ft) dia. wet well with bolt down lids has been installed adjacent to the tank serves as a pump out pit. The overflow from the tank has a 15m (50ft) long x 400mm (1.3ft) deep spill way with scour protection into an adjacent creek.

Showing 1-16 of 16

Feedback