"mailboxes and mailing room fittings"

There is a saying that “Everything is Bigger in Texas,” and the Dallas, Texas police department is no exception. The city of Dallas is ranked in the top 10 cities in the U.S. in terms of population, at 1.2 million people. The Dallas Police Department is the ninth largest municipal police force in the U.S., based on 3,012 sworn officers. It is led by Chief of Police, U. Reneé Hall. Security a Concern When Designing HQ Building The department is located in the Jack Evans Police Headquarters building, which was built in 2003. It is 358,000 square feet, has six floors, is spread over a three-acre site, has a separate 1,200 car parking garage and a two-acre, open parking lot for additional visitor parking. Prior to 2003, the department was housed in the circa 1914 former City Hall Building. The Jack Evans Police Headquarters building was under construction when 9/11 terrorists flew airplanes into the World Trade Buildings in New York. That event was preceded by the Oklahoma City Murrah Federal Building bombing in April 1995. Therefore, security was a concern in its design. Police officials worked with a Police Design Consultant – McClaren, Wilson, and Lawrie Architects of Phoenix – to help design the building to resist a terrorist attack and isolate potential hazards. The building also needed to control visitor traffic and access. On an average month, there are 5,000 public visitors to the Jack Evans building. In addition, shots fired at police buildings nationally are not uncommon, says Paul M. Schuster, Senior Corporal/Facilities Management for the Dallas Police Department. “For the most part they are random, single shot drive-by shootings. Often, the officers are unaware that the building has been shot at, until they find a bullet hole in the brick or glass. Increasingly, police tend to be a symbol of government and some citizens see that as a visible target to lash out at. Police officers are trained to expect the routine types of calls, such as domestic violence, traffic accidents, and other crimes. Yet they must be flexible to anticipate the non-routine that can be dangerous and change in a heartbeat.” An Active Shooter Incident Led to an Increase in Security On June 13, 2015, after midnight, a 35-year-old male placed a duffle bag with a remote-controlled bomb to detonate later between cars in the parking lot of the headquarters building. The suspect then began shooting continuously at the lobby windows. Officers responded to the scene, a vehicle chase began, and the incident ended outside the city. Luckily officers in the lobby took cover and were not injured. Following that incident, the Dallas Police Department conducted a security assessment of the building and also at seven patrol stations throughout the city. The assessment included testing various construction materials for bullet resistance to various types of weapons. Gensler Architects and Guidepost Solutions, LLC developed the solutions and plans. “Yesterday we were concerned about handguns, today we are worried about rifles, and the idea of terrorism is always present with outright attack or bombs,” Schuster notes. “The police officers and police staff only want a place that is safe and where they can do their good work.” Funding of $1.3 million was approved to upgrade the lobbies of the seven patrol stations to withstand rifle rounds, and $1.9 million to improve headquarters lobby security, and to upgrade an aging security system. Turner Construction Company and Convergint Technologies, LLC conducted the renovations and security technology integration. Challenges to the Security Design The headquarter’s lobby was initially designed as a two-story glass-walled structure, with an information desk and public records service windows. Visitors were allowed free entry into the lobby and were only screened in an open area to the side if going to other floors. “The challenge in upgrading lobby security was the two-story lobby entrance glass. “In addition, there were concerns about keeping an ‘open’ and friendly service concept in mind and ensuring that the lobby would not resemble a ‘fortress’,” Schuster notes. Screening Room with Security Revolving Doors to Contain Incidents The solution was to keep the existing exterior unchanged and focus on adding a layer of security once a person enters the lobby. Visitors now enter the headquarters and immediately proceed to a side room where security screening is conducted. A new secondary wall with bullet-rated glass and solid bullet resistant wall materials was constructed inside the lobby to channel visitors to the room. Once inside the screening room, which also has bullet resistant walls, the visitor has belongings x-rayed, and they walk through a metal detector. In the event that anyone was to produce a gun and begin shooting, the incident could be contained inside that room. Once a visitor has been cleared, they proceed into the main lobby via a Boon Edam Tourlock 180 security revolving door. This automatic, four-wing door is the most advanced, security revolving door in the Boon Edam product range that offers maximum throughput, allowing users to enter and leave the building simultaneously. In the event that a large number of persons try to force their way into the facility, the Tourlock 180+90 will determine that more than one person is trying to enter and will reject the person and lock out any others from entering. Once a visitor is ready to leave the lobby and exit the building, they pass through another Boon Edam Tourlock 180+90 that leads to a vestibule with exterior swinging doors. In the event that someone tries to go back into the lobby from the front vestibule area, without going through the security screening room, the Tourlock security revolving door will reject their entry.

SAS International bespoke metalwork comprising of a striking waveform shaped ceiling was designed by architects Arup Associates to feature in the construction of Ropemaker Place, London EC2 for British Land. Simon Anson, architect at Arup Associates comments; “The purpose of the ceiling was to provide the 10.5m tall entrance foyer with an acoustic performance, and create a lighting source providing both uplight and downlight. The illuminated ceiling provides the entrance foyer with visual impact from views of City Point Plaza, Ropemaker Street and The City.” Simon Anson continues, “The appearance of the ceiling is that of a series of illuminated vaulted waves flowing into the interior, the volume of the space perceptually expanded by the uplit waveform surfaces. The vaulted ceiling with its flowing contours provides a visually stunning focal point as well as a practical solution to the acoustic requirements of the interior of the building.” Specialist bespoke wave ceilings were installed in the atrium, main reception area, lift lobbies and main external canopy. The waveform panel, although elegant in appearance, had to have the required strength to support the light fitting. The extra weight posed a significant design challenge of how to integrate and support the light fitting into the waveform panel. The complex design required all fixings to be concealed, as a large proportion of the face and rear of the waveform tiles are visible. In the design development and installation of the system, Arup Associates worked closely with SAS International and the specified lighting manufacturer, Zumtobel, to ensure the panels integrated seamlessly with the luminaires to produce the optimum installation.

Part of a vast regeneration programme to improve student amenities, the UoB invested £60m in a state-of-the-art academic library. The project aimed to celebrate the wider campus architectural styles and improve access to new resources like e-journals and wireless charging stations. Associated Architects chose SAS International to provide the high acoustic and finishing touches to the academic interior fit-out. In order to create an effective library environment, acoustic performance must also be carefully considered. With the aim to create a space suited for thousands of scholars, bespoke acoustic metal wall panels were supplied to the library. Depending on the location of each tile, the panels were finished in white and black-grey PPC or anodised in regency gold. Specified with a 23% or 50% open area, the panels act as acoustic absorbers with an oblong perforation. Each panel is fitted with a black, fleece-wrapped acoustic pad for high performance. The architects specified three additional acoustic treatments for open soffit areas over computer clusters and lounge spaces. SAS500 baffles and bespoke ring shaped and circular rafts were created by SAS International to fulfil this requirement. The discs and raft-halos are an SAS150 hybrid designed to fulfil acoustic and service requirements while contributing to the contemporary look. Consisting of multiple panels, the concealed grid system creates a smooth finish enclosed using a steel perimeter trim. Long 3m baffles were also installed in a continuous sequence along walkways and group study areas. These options provide durable acoustic solution, minimising maintenance and improving access to the soffit and services.

About the ProjectIn response to unprecedented demand, Rouse Garden is filling the void of modern-day homes close to trains, shops & jobs at the most competitive price on the market. Featuring the diversity of 1, 2 & 3 bedroom homes, there’s something for everyone in the most wondrous apartments to grace Rouse Hill. From floor to ceiling glass walls, timber hardwood flooring in your living room and a private rooftop garden terrace complete with BBQ and lounge areas. The quality of design is worthy of being marvelled at. Living rooms have been purposed to allow seamless indoor and outdoor transitions, blurring the boundaries between inside and out and elevating your home to new heights.ChallengeWhen you are building in one of the premier locations in Norwest Sydney, it’s all about the ding to match the lifestyle your new residents demand from your new community.  Presented with tight detail, the look, the feel and the performance of your build time-lines, and expectations of high quality, Hydraseal were tasked with working on Rouse Gardens. Waterproofing both the internals and roof of the building, the builder demanded warranties to match the project requirements and to deliver a quality finish demanded of this high profile project.To streamline this project, availability of stock and ease of application were key product requirements needed from the project, which Tremco were tasked with delivering.Tremco SolutionVulkem H2 Plus, Vulkem NEM, Tremflex50, Vulkem 951Hydraseal partnered with Tremco for a few reasons, primarily trust built up through a longstanding relationship provided the support necessary for the key for the success in this project.The versatility of Vulkem NEM being able to be used for internal wet areas, in conjunction with Vulkem H2, as well as for outdoor areas under Vulkem 951 NF allowed for fast and consistent application of waterproofing on the project, given the tight time frames, all backed with long warranties to match product performance.The combination of Vulkem NEM, Vulkem 951 NF and Vulkem H2 provided the warranties demanded by the builder which resulted in both Builder, and Applicator very satisfied with the job. 

The legendary Peninsula Hotel in the heart of Paris was undergoing a large renovation project and the project’s architect, who specialised in the restoration of exceptional establishments, decided on three Boon Edam Crystal Tourniket revolving doors and one Circleslide to fit their brief of installing a transparent and luxurious entrance. Built in 1908 to host the palace “Hotel Majestic”, this palace hotel was due for of an extensive renovation to offer modern facilities, standards and technology while still preserving its historic roots. The restoration took 4 years to complete and the end result is a five-star contemporary hotel which maintains and respects the spirit of the original institution. The project involved working with the finest artisans with an ancestral knowledge of this landmark building. The architectural renovation was led by AFFINE DESIGN, one of the major architecture and interior design offices in Paris

LOCATIONPortsea, Victoria – AustraliaCOLLABORATIONArchitect: CarrBuilder: IB ProjectsDeveloper: Portsea Surf Life Saving ClubBRIEFPortsea Surf Life Saving Club was given an $8 million contemporary redevelopment where part of the brief was to protect the glass and external concrete to reduce maintenance costs and dirt build-up.ECOCLEAN were engaged to coat the building’s glass windows (including the observation room) and all external concrete with our protective Self-Cleaning Coating. The coated surfaces will self-clean and look as new with the added benefits of purifying the air the that comes in contact with.MATERIAL & APPLICATIONECOCLEAN Glass TreatmentECOCLEAN Self-Cleaning GlassECOCLEAN Porosity SealerECOCLEAN Self-Cleaning CoatingOUTCOMEThe redevelopment of the surf club not only brings the building into the present but our ecofriendly and sustainable coatings will keep the concrete and glass protected and clean well into the future.

SAS International provided an unusual feature perforation to a metal ceiling solution for Cork County Council’s redevelopment of their MOT office. The refurbishment of Cork County Council has created an outstanding open plan office for their upgraded MOT Office. Included in the redevelopment is the installation of 240 meters squared of acoustic SAS500, with a unique OB50 perforation, installed within the open plan office, meeting rooms and cellular offices. Conserving the original architectural features was significant when embarking on the reconstruction of the building. SAS500 was chosen to accommodate the spacing of existing structural beams, the system hung on secondary grids to adhere to specific architectural requirements. To adhere to the recent popularity in open soffit trends, SAS500 offers a solution in addition to providing acoustic absorption. A unique OB50 perforation was specified in the design of the baffles for this project. SAS International worked in collaboration with Cork County Council Architects and CField Construction to provide bespoke design solutions for this project.

Jewel on the Gold Coast (Jewel), a luxury development of three crystalline towers constructed on the internationally renowned Surfers Paradise beachfront, Gold Coast. Jewel consists of 513 apartments and a 169-room luxury hotel – a first of its kind on the Gold Coast. The towers with their distinctive glass curtain walling system, are the result of a collaboration between Oppenheim Architects and DBI Design. The fundamental design concept drew inspiration from three smoky quartz crystals that we discovered in the region. Jewel is inspired by the crystalline volcanic hook that forms the underlying structure at the coastline and, in particular, the Gold Coast’s iconic hinterland. Multiplex was awarded this prestigious project and commenced construction of this billion-dollar development in 2016. The Jewel is Australia’s largest beachfront mixed-use development and the first absolute beachfront development on the Gold Coast in more than thirty years. Tilecorp Pty Ltd. was awarded the tiling contract on the project that included the installation of 600 x 300 mm porcelain tiles in the public areas, travertine in the apartments, penny round mosaics on the walls in the public amenities, and cobblestone in the outdoor areas.

Acoustic SAS International metal ceiling systems were installed in the eight-storey Eqwater office building in Paris. SAS International’s SAS330 was installed throughout the office areas in the building. SAS330 is a lay-in metal ceiling tile system that provides functionality and outstanding acoustic performance for a range of cost-effective design options. The practical nature of its structure allows ease of construction and maintenance. The corridors of the building were fitted with SAS International’s SAS205. In some areas it is not possible to use a standard hanging bracket due to the number of services in the ceiling void, SAS205 is supported at the perimeters, up to a maximum width of 3000mm, making it a perfect solution for corridors. Metal offers an inert and inherently hard-wearing surface, making metal ceiling systems both hygienic and a low-maintenance option over the course of their lifespan. Only a simple cleaning routine is required. The lifespan of SAS International’s metal ceilings is in excess of 25 years with only very basic maintenance.

The brand new public amenties as part of the Diamond Creek Tram Project and larger Diamond Creek Regional Play Space incorporates a number of Britex’ Signature Vandal Resistant Stainless Steel fittings and fixtures. These include: •Britex S.S. Centurion Accessible Toilet Pan (PCD) supplied with Black Vandal Resistant Closed Front Toilet Seat (SVRC-B) •Britex S.S. Centurion Ambulant Toilet Pan (PCAM) supplied with Black Vandal Resistant Closed Front Toilet Seat (SVRC-B • Multiple Britex S.S. In Wall Cisterns with Raised Accessible Buttons (FIW-D453) •Multiple Britex S.S. In Wall Cisterns with Low Profile Standard Buttons (FIW-S453) •Britex Adjustable Straight Arm Backrest (BTX-BR-S) •Britex S.S. Accessible Hand Basin (HBDA) •Britex S.S. Security Hand Basin complete with Security Tapware •Britex S.S. Security Mirror 1000mm x 450mm (SMIR) •Multiple Britex S.S. 90 Degree Ambulant Grab Rails (BTR-01-058)

The new Student Center at Columbia College Chicago, located at 754 South Wabash Avenue in Chicago, opened its doors in the fall of 2019. This brand-new building offers five spectacular stories of spaces for students including music and film-screening rooms, dining options, a fitness centre, a reflection room for meditation and prayer, and event spaces for meetings, performances, and receptions. Columbia College Chicago has a closed campus. In order to enter any building on campus students and staff must have a Columbia ID or visitors must have a valid appointment. The main entrance at the Student Centre is the Tourniket manual revolving door that leads to a public foyer that includes a coffee shop and lounge. Since the speed gates are just past the security desk at the boundary of this area, they serve as a visual and physical indicator of where the public area terminates. Next to the Speedlane Open speed gates, which are notable because they do not have any closing barriers, guards watch as people pass through them to ensure that everyone is scanning their IDs and that the IDs are valid, in which case the speed gate shows a green light. In a situation where a red light shows and the gate alarms, the guard will check the person’s credentials and can try to troubleshoot the ID card. “The decision was really about what creates the least barrier to those entering and exiting the building,” said Dutil. “We don't really want our students to feel like they are overly policed or that our buildings are not accessible to them. So the design of the Open speed gates provided the best solution in terms of controlling access without being obtrusive." Swift Passage While Maintaining Accountability Before the Student Center was built, students entering any campus building would just show their ID to the security officer as they walked past. The administration realised that while this does provide some level of security, it is not foolproof – particularly when many people are entering at the same time for a class. The College’s head of security made the suggestion to install a system that would allow for swift passage of authorised people while maintaining accountability around who enters and exits the building. As anticipated, there was a brief learning curve for the students using the new system. “This was the first system like this on our campus,” said Dutil. “And the first few days that the new Centre was open were also the first few days of school. There were a lot of people new to the campus who required a bit of coaching from guards and our student staff in terms of where to place your card, and to not walk through before you place your card.” Coming Out Ahead of Swinging Doors Dutil confirms that the access systems placed at Boon Edam speed gates are actually outperforming those placed at swing doors across the campus for convenience and adoption. Across the campus, there is a card reader at every swing door entrance of a building where you present your card and a light turns red or green. But oftentimes the card reader is missed, or depending on the placement of the lights and placement of the guard, it can be kind of hit or miss with students walking right by it. “But with the Open speed gates, they're very visible and although they're not a total barrier to entry, they are something that's right in front of you. Because it's very noticable and not easily overlooked, the students have learned pretty quickly to get their ID out. In fact, this was meant to be a test run for the campus to ensure it would be viable and worthwhile for other buildings as well.” Advanced Features Add Value and Flexibility The speed gates have delivered additional benefits beyond basic campus security, according to Dutil. “One of the nice things about a system like this is that we can count visitors to the Student Centre because we get the data of everybody that scans in. So on a busy day for us it's about 2500 people throughout the day. That can range depending on what's going on and what time of year it is. On weekends we're very slow, since there are no classes – maybe 900 to 1200.” “We are a rental venue as well, so we have times where the building is open to non-Columbia College Chicago people for events or other functions. There's a really convenient touch panel right at the security desk called the BoonTouch, where the officer can turn off the turnstiles during those times and then attendees can move through freely without any alarms going off at all.” A New Revolving Door Adds Comfort and Peace of Mind Finally, the Tourniket manual revolving door delivers one additional benefit to the Student Centre, located in a city known for harsh weather. “Revolving doors are always preferred at a building like this that gets a lot of traffic going in and out. We have cold, drafty weather that blows right into our main space at that first floor entry. The revolving door helps to keep the building warm and saves energy and utility costs as well,” said Dutil. “Students feel safe and comfortable entering the building at night,” he concludes. “Our building has a lot of nooks and crannies, and someone can end up alone in a space. And so I think knowing that the only people that are in that building are the ones that are supposed to be there is helpful. Overall, our students appreciate the effort to try to keep them safer.”

Mauritshuis is located in the heart of The Hague. It is famous around the world for its premium art collection. The intimate museum rooms of this 17th century monument display over two hundred excellent art works by Dutch and Flemish Masters. Boon Edam installed two special revolving doors in the museum's newly constructed section, one of which is a Tourniket that is 4.6 m high. The underground entrance foyer is actually located six meters below street level, but now with this renovation, as daylight penetrates from all sides, it feels very light and spacious. “Before the renovation, the museum’s entrance on the side of the building was rather cramped,” says architect Hans van Heeswijk at the press preview. In order to create a more generous reception area, he decided to move the main entrance under the forecourt of the listed, seventeenth-century Dutch Classicist house, which had to remain exactly the way it was. It was a feat in itself to connect two buildings underground and to lower the foundation of the new wing. The small surface area and the building's location right next to the Prime Minister's tower made this construction project quite complex. Boon Edam was honoured to supply two special automatic revolving doors that had to suit the new museum wings perfectly.

After nearly 100 years of serving the local community, the Petersham RSL club moved to a new home this year, in a redevelopment centred on style and comfort. Part of the design brief for the architects and developers was that the indoor spaces were comfortable for guests, particularly in reception, which can often feel the effects of wind and debris entering through open doors. The developers chose a fully automatic Tourniket revolving door from Boon Edam Australia to make a grand first impression to the classy new club, which was recently opened by Prime Minister Anthony Albanese. It is the same type of cost-effective entrance used by leading hospitality venues globally to protect patrons and workers against wind, weather, and pollution, while also controlling traffic flow and opening up new sheltered areas for productive amenities. Petersham RSL CEO, Danny Fitzgerald, said “The Boon Edam revolving door creates an impressive entrance to our modern club, and was the perfect fit for our redevelopment. With this door, Boon Edam met two key specification requirements – enhancing climate control inside the club, and enhancing personal comfort in the reception area.” A welcoming entrance The 3-wing Tourniket revolving door pictured has a height of 2,650mm and diameter of 2,800mm to allow ample room for entry and egress. It has four LED warm white downlights for a pleasant and welcoming experience. A powder coated black grey finish on the exterior of the door allows it to effortlessly blend in with the building’s overall aesthetic and design. Boon Edam Australia Managing Director Michael Fisher says that a major benefit of revolving doors is that they allow visitors and staff alike to enter into a new world inside – one that is calm, quiet, and protected against allergens and climactic extremes. “In addition to customising the door to the club’s aesthetic preferences, we worked closely with Petersham RSL to deliver the doors within a complex installation involving temporary doors while other elements of the façade and reception were completed, prior to the arrival and installation of the revolving door,” he said. Boon Edam Australia is a part of the globally leading revolving door manufacturer, Royal Boon Edam, and the door selected by the Petersham RSL is a type already used by architects, builders and specifiers for Fortune 500 companies globally and for major Australian hotels, clubs, banks, offices, legislatures, and buildings. “The teams worked well together, and the result was an outstanding front façade and entrance, which will have a long-term impact on climate control and comfort,” said Fisher. Always Open, Always Closed A key benefit of revolving door systems in addition to access control is energy conservation, with their “always open, always closed” functionality providing lower HVAC losses while increasing the temperature stability and comfort of people inside. These advantages have been proven in many of the world’s leading clubs, hospitals and hotels, where visitor comfort is paramount. “Think about how much air escapes when a sliding door opens, or how much dust, pollution, or pollen can enter the front reception area. With a revolving door, only one quadrant of air is moving around each time, providing a highly effective method of controlling the indoor climate,” said Fisher. Further economy and versatility are provided where required by night locking entrance options including electromechanical locks that can be unlocked with a key or by means of an optional key impulse switch.  “These climate control features are not always considered at the design stage, so Petersham RSL has shown great foresight by specifying these outcomes early,” added Fisher.

Orchard Manufacturing is an Australian health company that has been producing fruit-based laxatives under the Nu-Lax brand, since 1937.The organisation’s new state-of-the-art, purpose-built facility - located in the Victorian suburb of Rowville - delivers both superior function and out-of-the-box design as well as providing a new home for the long-time Melbourne-based manufacturer.To ensure the new facility’s processing and packaging zones met the strict hygiene standards, 1, 300 m2 of Flowfresh SR was installed in Warm Buff, Grey and a custom Aqua Blue shade.The HACCP Internationally certified Flowfresh SR system was chosen thanks to its seamless, antimicrobial finish as well as its abrasion and chemical resistant profile.Flowfresh SR provides excellent chemical resistance against detergents, oil ingredients, caustic soda, sugar syrups, methanol and a variety of acids. The system delivers excellent abrasion resistance against impact as well as sustained foot and trolley traffic.Flowfresh SR is resistant to thaw and thermal fluctuations from -40°C to +120°C, making it suitable for cool rooms and cold storage areas as well as those areas subject to high-temperature cooking processes and hot-water wash-downs. Slip resistance can be tailored to suit the individual needs of a given processing area.

When entering the new Segerstedthuset building at the Uppsala University in Sweden – guests, students and employees alike are cheerfully greeted by a colourful revolving door. This unique door is an art installation by renowned American artist Spencer Finch and is aptly named ‘The Colour Wheel’. The artist is best known for installations that visualise his experience of the nature of light, colour, memory. The Uppsala University is the oldest university research university in the Nordic area and this large facility is located in Uppsala, Sweden - educating 45000 students. The new Segerstedthuset building, designed by 3XN is a multi-purpose extension to the university and was conceptualised and constructed as a modern workplace for researchers, university administration and management. Boon Edam Sweden was approached to supply Spencer Finch with two Tourniket revolving doors. The doors measure a diameter of 3000 mm and a total height of 2400 mm and the 6 glass door panels provide the canvas for the light installation artist to work his magic on. Colour film is fitted between the glass which creates a truly remarkable and memorable entry experience into this urban, communal space. The Segerstedthuset building was built as a sustainable building and proved to meet high environmental standards such as efficient energy use, sound material choices and a silent indoor environment. The building is environmentally certified according to the Sweden Green Building Council at the silver level.