"ground water control trench sheeting etc"

APPLICATION: 30mm Wall PanelsPROJECT LOCATION: Redland Bay QldPROJECT DETAILS: Seeping WallsPROJECT COMPLETION: Jun 2011Atlantis fixing old water seepage problemsA property in Redland Bay Qld was having water seeping through the walls of the lower part of the property, which was below ground level.A trench was excavated to expose the walls which were below ground level, and the walls were allowed to dry out.A waterproof membrane was affixed to the wall and Atlantis® Flo- pipe® geotextile wrapped perforated pipes were clicked together and laid on top of the lower fold of the water proof membrane.A run of Atlantis® Flo-cell® drainage cells was sat on the perforated pipes and taped to the waterproof membrane, to extend along the length of the trench. The run of drainage cells was covered in hydrophilic geotextile and the trench filled in with compacted gravel.The water proof membrane formed a barrier to prevent water from contacting the walls of the property, while the 30mm drainage cell formed an air gap to relieve any hydrostatic pressure on the water proof membrane. Any water entering the drainage cell falls into the perforated pipe where it is taken away. This arrangement has been used, literally, thousands of time to overcome or prevent this seepage problem.

LOCATIONBroadbeach Waters, QueenslandCOLLABORATIONDesigned by: Smek DesignBuilder: Live BuildBRIEFPreserve and protect the concrete elements of the high-end residential homeMATERIAL & APPLICATIONECOCLEAN Concrete Sealer(Specified concrete on the project including the bar area, front fence, and garden bed)OUTCOMEThe Beverly is a stunning $7.7mil high-end residential building sitting right on the water at Broadbeach Waters QLD. It was a pleasure for our QLD team to work in such a fantastic location. Our Concrete Sealer will keep the concrete looking clean, allow water to bead off the concrete and reduce carbonation which will extend the asset life of the concrete.TESTIMONIALWorking with ECOCLEAN has been a stress-free experience. The whole process was professional and positive from start to finish. The work is perfection. The concrete-look colour stain is seamless and the sealer used for all our pre-cast concrete panels have not had any issues with water damage or staining. I would highly recommend them and would be using them for all future projects.Ryan and Guech Venville, Homeowner

GWA Bathrooms & Kitchens was appointed to provide a full schedule of fixtures and fittings for this new residential development located in the landmark Rhodes Waterside precinct. Proving to be leaders in water efficiency technologies, GWA Bathrooms & Kitchens supplied a range of dual flush toilets, water efficient taps and showerheads, as well as bathtubs and basins.

As part of the ‘green’ refurbishment of the Accor Vacation Club Apartments, GWA Bathrooms & Kitchens supplied highly-efficient fittings and fixtures to complement the greater environmental awareness of the new design. Improved water conservation was achieved by installing the latest in efficient flush systems and reduced flow tapware in all the bathrooms and kitchens.

This hurdle was overcome with the assistance of Rondo’s Technical Team who created unique designs of the external façade framing which pleased Contractor Conrad Linings and Builder, Broad Construction Services. Furthermore, Rondo worked in consultation with Hyder Engineers for a solution of the 150mm MAXIframe External Walls and Framing that required galvanised sheet metal to be installed on top of the framework to prevent any potential water ingress, with Rondo supervising the correct installation.

The Uni of Queensland Emmanual College features the following RBA products:The 2011 Brisbane floods initiated the refurbishment of parts of University of Queensland’s Emmanuel College and created an opportunity to upgrade student amenities. The Facilities Managers decided to control water usage by using RBA’s Time-Trol shower controller. At the same time, they chose to replace out-dated twin element ‘boiler’ water heaters with instantaneous gas. The results were astonishing. “The university estimates it is now saving $60-$70K per year in water and energy savings.”The Time-Trol Shower unit allows maintenance staff to nominate run-time and lock-out parameters. These can be selected from, and changed to, any one of 12 options. No special coding required, just the flick of a dial by staff. It was ultimately decided to offer students a 5 minutes shower with a 30 second lockout. According to university staff ‘…the students have adapted to the usage restrictions seamlessly. There hasn’t been a complaint uttered…’

At Bostik, innovation comes in many forms.Ultraset® 3 in 1 is Bostik Australia's premium timber floor adhesive incorporating Thickness Control™ Spacer Technology, a proprietary feature consisting of recycled, ground-up car tyres mixed throughout the adhesive.When applied, the Thickness Control™ Spacers act like tiny rubber pillars, suspending the timber and maintaining optimal adhesive thickness to ensure superior performance as a moisture and impact sound reduction membrane.For West Side Place, Ultraset® 3 in 1 presented significant time and cost savings vs conventional multi-layer acoustic systems by eliminating the need to install a separate moisture barrier, acoustic underlay and additional layers of adhesive. Efficiencies that flowed directly onto the construction team, supporting trades and ultimately the developer, delivering a high performance solution within budget, ahead of schedule all the while guaranteeing a compliant and comfortable environment.

Swinburne University of Technology located in Hawthorn, Victoria required a new flooring solution for its Department of Architectural and Industrial Design workshop space. To find a solution that was both durable and decorative, Flowcrete Australia was consulted.600 m2 of Flowfresh SR in a custom Ultramarine Blue was installed at the Swinburne University Hawthorn campus thanks to its robust nature and ability to be specified in a bespoke colour.The workshop, locker area and classrooms provide students with a creative space to formulate, plan and create their visions, and the custom colour was chosen to help inspire and keep the creative juices flowing!As well as being extremely hard-wearing, the polyurethane system Flowfresh SR is also chemical resistant, meaning that it could withstand spills of drinks, paints or other substances that could harm lesser floors.Although Flowfresh SR has a positively textured surface with non-slip aggregates, the flooring system is also very easy to clean, meaning that spills or dirt could easily be wiped away, maintaining a safe space for staff and students.Prior to the application of Flowfresh SR, substantial remediation works were required including the removal of timber parquetry and the filling of over 100 lineal metres of 50mm deep service trenches.

Rondo worked closely with C&L Ceilings who were charged with the wall and ceiling contract. In order to be sure that the building’s external facade would remain structurally secure and adhere to the architectural detail, C&L installed Fibrous Cement Sheets, supported by heavy gauge Rondo components.

Project Location: Amberley, Queensland, AUSTRALIA.In Amberley is one of the largest base facilities in Australia. The redevelopment works are valued at AU$331.5 million. New construction and refurbishment works to be undertaken include newliving-in accommodation, maintenance facilities, storage, working and training accommodation, a combined mess and a new physical fitness centre.The site is owned by an Australian Government Department. The Atlantis® Turf Cell® was supplied by Atlantis and was installed by Kennedy Projects Group in April 2009. The system is located at the playing fields on the south-western corner of Gannet St and Rosewood Road, Amberley, QLD.A vegetated swale surrounds the playing field. The swale is an open, shallow channel designed to slow runoff, filter it, and promote infiltration into the ground. Excess water moving through the soil profile is captured by Atlantis® Matrix® Tank – Single modules. The use of a swale to collected water results in smaller runoff volumes, lower peak discharge rates and cleaner runoff. The vegetation in swales, usually thick grass, helps to trap pollutants such as suspended solids and trace metals. The Atlantis Matrix modules extend 3m (10ft) wide under the swale for 110m (360ft).Water collected by the swale is collected in a stormwater harvesting tank located adjacent to the north-western corner of the playing field. Perforated corrugated plastic pipes used as subsurface drainage pipes extend for 1560m (5110ft) is also collected by the stormwater harvesting tank.The stormwater harvesting tank is located subsurface and is constructed of a heavy duty low density polyethylene liner and non woven geotextile surrounding Atlantis® Matrix® Tank - Double modules. The Atlantis stormwater tank has a 4,100m3 (144,80 ft3) capacity. Water collected by the swale and stormwater tank system is used for irrigation of the sports field.The Atlantis stormwater tank has eight (8) cleanout / inspection ports placed through the systems. A 1200mm (4ft) dia. wet well with bolt down lids has been installed adjacent to the tank serves as a pump out pit. The overflow from the tank has a 15m (50ft) long x 400mm (1.3ft) deep spill way with scour protection into an adjacent creek.

In need of a refresh, the entire Welly Road Early Learning Centre interior was refurbished, which included replacing the tired and outdated sheet vinyl flooring throughout the facility. When it came to choosing a suitable flooring solution, the design team at G8 Childcare identified a number of requirements for their childcare centre and engaged Asset Flooring to provide flooring to meet these unique specifications.

In collaboration with market leading Astina Group, GH Commercial brought to life luxury design visions with a series of custom flooring solutions.Products:Custom Designer Jet® carpet, 17oz sheetApollo Hardwood Hybrid Flooring, colour 555 Spotted Gum NaturalSpinifex 100% broadloom carpet, colour 91 Sand Storm Custom hand-crafted rugsBuilder: Astina GroupInstaller: Homecare SydneyPhotography: Sebastian Mrugalski Photography

Renowned Melbourne architecture firm Denton Corker Marshall was responsible for designing the bridge’s striking appearance. ‘The design respects the site’s cultural heritage and environmental values, providing the physical and mental space to pause and reflect,’ says Neil Bourne, Director at Denton Corker Marshall. The elegantly twisting bridge connects both sides of Hobart’s broad entrance highway in a distinctive entry portal. This much-anticipated civic project’s major design feature is 180 metres of Capral aluminium sheeting, skirting the bridge.

COLLABORATIONArchitect: Morson GroupBuilder: Reitsma ConstructionsBRIEFApplication to the coloured precast concrete and compressed fibre cement sheeting of the newly built auditorium.MATERIAL & APPLICATIONECOCLEAN Porosity SealerECOCLEAN Self-Cleaning CoatingOUTCOMEThe ECOCLEAN team was engaged to find solutions that would protect the appearance of the facades of the St Mark’s Catholic College auditorium which included easy graffiti removal. The award-winning project is protected by our long-lasting functional coatings for years to come.

About the ProjectThis Child Health and Learning facility in Manly, deliversspecialist child healthcare for up to 15,000 families a yearfrom rural, regional and remote New South Wales andbeyond.The new facility will integrate a state-of-the-art child schooland health service that will accommodate regional childrenand families nationwide.This six storey building includes school classrooms,consultant and observation rooms, a paediatric oral healthunit with a dental and orthodontics room, ophthalmology,occupational therapy, sensory rooms and a telecare centre.ChallengeOver 80% of construction litigation and defect claims are a result of water ingress, of that 80%, almost 30% of those are below grade issues. (City Futures Research Centre UNSW).The two biggest waterproofing challenges for this build were:1) Below Grade - Non structural Blinding Slab, 4 metres below sea level and less then 50 metres from Manly Beach. This build had decanters pumping over 1.3 million litres of water per day awayfrom the site during the construction phase.2) The creation of a waterproofing solution which would not fail if the membrane was penetrated, be it in the pre or post construction phase.Due to the proximity to the beach and the build having a raft slab in the basement, a standard cookie cutter below-grade waterproofing solution was not an option for this build.Tremco SolutionTremco were asked to provide a solution for this complex build. The biggest and most demanding waterproofing areas within the build that needed attention were:1) Below Grade - 50 metres from the ocean and 4 metres below sea level, we needed a reliable waterproofing solution, that would also be robust enough to withstand any punishment tradesdelivered post installation, we recommended and used Paraseal SW (Saltwater). Paraseal SW is a multi-layer sheet membrane waterproofing system consisting of a self-sealing, expandable layer of bentonite laminated to an impermeable, high density polyethylene (HDPE).2) iAuditor reporting- iAuditor is an onsite quality assurance program Tremco conduct for the builder and applicator to ensure our products are being installed correctly and to specification. This gives the builder the confidence that there will be no waterproofing defects within the build.Overall, both the builder and developer were happy with the end result, which provided the warranty and quality required of such a development.

Didier Repellin, from the architectural firm RL & Associés, oversaw the project. As honorary Chief Architect of Historical Monuments and a member of the French Heritage Society (among other titles), he was the perfect choice for the renovation of the buildings and the grounds. His vision was to make use of the history of the city to embellish the ancient buildings and has done so by respecting the history of the Hôtel-Dieu while giving back the grounds to the inhabitants of Lyon.

Water tanks with a difference

The Deakin Uni LC Building features the following RBA products:RBA2733-032 – Compact Water Cooler Stainless Steel ShroudRBA2732-001 – Push Button Bottle Filler Stainless SteelDeakin University holds multiple campuses across multiple Melbourne suburbs. The University houses four main faculties, arts & education, business & law, health, and science, engineering & built environment. Deakin Uni is also renowned for its world-leading online tertiary education program, innovating modern education. Located to the west of the heart of Melbourne, the Burwood Campus holds the newly-unveiled LC Building, designed in an innovative way, holding multiple levels of formal and informal learning areas, health and wellbeing services and a premium staff working space for the Law School. The building aims for sustainability, sporting solar panels, native flora in its Wellness Garden and indoor greenery. The contemporary “green” design had to include RBA, as we share the same goal of sustainability. Furthermore, by providing to the ever-innovative Deakin University, we are improving the learning experience of the education sector.Pictured below, RBA’s ‘Compact’ Water Cooler, or the RBA2733-032, flows 30L of water per hour. RBA categorises the unit as ‘heavy duty’, meaning it maintains to be strong and long-lasting. Made of Stainless Steel with a Satin Finish, it has an Anti-microbial flexible bubbler with self-closing push button and non-squirt features (stainless steel bubbler options available upon request). Included is an integral perforated drain for hygiene & ease of cleaning. The Water Cooler exhibits a smooth radiused design that eliminates sharp corners thus minimising catch. All pipework is concealed within the Stainless Steel Shroud and contains the option of a Bottle Filler.Deakin University LC Building decided to pair the Water Cooler with a Push Button Bottle Filler, or the RBA2732-001. Users hold their bottle in the recess provided and press the button to activate the flow of water. Flow stops upon releasing the button. Spillage is directed onto the deck of the Water Cooler mounted underneath. Thus, students have a sustainable alternative for hydrating.

GWA Bathroom & Kitchens worked collaboratively with Architectus and Grocon to supply a full schedule of fittings, including reduced flow tapware and water saving toilet suites. This installation, together with the building’s innovative recycling technology, is saving approximately 100,000 litres of water per day, helping 1 Bligh meet its 6 Green Star rating - the highest Green Star rating for a commercial development across NSW.

Wellington Airport previously used warm hand dryers and paper towels. Their motivations for changing hand drying method were to find a more environmentally sustainable form of hand drying, also wanting to avoid the slip hazard that can result from water on the floor. Project Architect, Katherine Skipper explains "The Dyson Airblade Wash+Dry provided the perfect solution for the problems they were having with water on the floor and constant restocking of paper towels."

Mother Teresa Catholic College, WALocation – Baldivis, Perth, Western Australia      Installation Duration - 3 monthsInstallation Year – 2019                             Project Value - $15-20 millionSpecifying Architects – Parry and Rosenthal Architects TECHNICAL DETAILInstallation Type                                             NumberService penetrations                                     150Cluster penetrations                                      11Control joints                                                   700 LMConcrete slab pours                                       Grid pattern - numerousPerimeter                                                           500 LM  BACKGROUNDMother Teresa Catholic College is a progressive co- educational facility in the fast-growing suburb of Baldivis, 60 kilometres south of Perth in the City of Rockingham.The school opened in 2013 and in 2018/19 a Stage 3 Capital Development Program called for the construction of junior-secondary class-rooms and associated facilities, playing fields, courts, grounds, and extended parking. REQUIREMENTThe College’s ongoing plans for facility enhancements represents a significant investment and is worth protecting with the most effective pre-construction termite management system.The College caters for students from pre-kindergarten to Year 12. Chemical termite controls were not an option because of toxicity issues, making a clean and environmentally safe physical termite barrier the correct solution.APPROACHA typical WA site, the college’s location is predominantly flat, with sandy soils and substrates. In general, this type of environment poses a high risk for termite attack common to this region of Western Australia. SOLUTIONThe main challenge with the installation came from the rammed earth exterior walls. Their natural composition can chip easily, so nailing or sealing the termite barrier onto the wall was not practical.Our solution was to install Termimesh cold joint /paver trays to the perimeter of the concrete slab edge. These protected the concealed entry point between the slab and wall. They also engaged into the external pavement instead of against the rammed earth wall itself.BENEFITSThe Termimesh System which comprises of our 725 grade stainless steel mesh, Termiparge bonding cement and high grade stainless steel clamps not only met their strict requirement of no chemicals it will also continue to provide them with reassurance and peace of mind the comes with our market leading Pledge Guarantee. The Pledge Guarantee provides the client with a 10 year guarantee that requires no annual inspections during that initial period. The client then has the option to extend this on an ongoing basis by having an approved annual inspection.

The Gateway building In Sydney’s Circular Quay is Australia’s first office tower to use fully integrated touchless 3D fingerprint scanning to allow authorised office workers and guests into the building. The building’s new entrance involves a complex integration of security and technology experts, including Boon Edam, Schindler Lifts, Honeywell and IDEMIA (the manufacturers of MorphoWave fingerprint scanning technology). The solution had to work seamlessly to enhance the user experience and building security for tenants and visitors at the 46-storey landmark building in Sydney’s CBD, owned by Dexus Wholesale Property Fund. Boon Edam delivered the entrance security solution, with Lifeline Speedlane Swing speed gates that are the slimmest in the market, which added to the aesthetics, and helped with design considerations within the width of the lift lobbies. Rising Demand by Tenants for Increased Protection The upgrade project required an entrance security system that incorporated sophisticated security yet kept an aesthetically pleasing and unobtrusive lobby. The ideal solution was found by integrating Boon Edam speed gates, MorphoWave fingerprint scanners mounted on a coordinating pedestal (the Lifeline Boost), Schindler Lift destination control and Honeywell access control technology. This was a response to increasing demands by building occupants to improve the entry security measures to better cater for the protection of employees, visitors and valuable data. A Complex, yet Perfect Orchestration Gateway’s access solution includes a bank of sleek and stylish security speed gates (Boon Edam’s Lifeline Speedlane Swing), which are seamlessly integrated with touchless and intelligent elevator destination control (Schindler Port’s PORT 4 mini) and security access via a biometric fingerprint scanning (IDEMIA’s MorphoWave) – all at one point, enabling quick, accurate and seamless entry to secured areas. These technologies are all controlled by Honeywell’s access control system. Mr Stephen Hodge, Senior Project Manager, Dexus added that “with so many stakeholders, and a strong need for reliability and quality, it was important that everyone knew the goals of the project and worked well together. I’m pleased to say that it was like a perfect jigsaw and everything came together smoothly.” “What was important to Dexus is that we were pushing the boundaries to create better experiences, but we’re only doing so with proven products. Boon Edam’s speed gates have been installed globally and locally, and this gave us added confidence that they were the right product for this forward-looking project,” he said.

A bold and significant new development has emerged in St Kilda as a ‘liveable Lego tower’, rising in tiered rainbow cubes that appear to balance like building blocks. Aptly named The Icon, the distinctive new building is wrapped in expanded aluminium mesh that changes colour as sunlight moves.The inspiration of artist Matthew Johnson, who worked with Jackson Clements Burrows Architects to conceptualise the distinctive complex, was achieved with Interpon Powder Coating on board as a collaborative partner.“My vision for the project was for people look up and see something interesting, to see something that is in a sense iconographic – as a marker or reference point,” explains Matthew.Interpon were involved with the project “right from the start”, explains Gareth Connell, Regional Specification, Interpon. Their association began after they were introduced to Pace Developments to discuss colour and product selection for the external façade.“We work closely with Interpon, and Pace asked us to quote with the product already powder coated,” says Ian Dunstan, southern regional sales manager at Locker Group, who manufacture perforated and expanded metal. Interpon were able to step in and develop the colour range separately, to meet the design brief and provide an ultra-durable coating system that meet the expectations of all parties.“The team at Interpon were very accommodating, engaged and professional in taking the concept on board,” says Matthew. “We were able to manifest unique colours based on the ratios I created with their chemist, inventing a whole new series of colours. This was crucial, as each level is depicted in different colour hue variations from earth to sky, which cross reference the nature of the geographical and environmental stratums. This flux of seasonal change is portrayed through subtle tonal gradation. Working with Interpon was a very fluid operation.”Interpon has collaborated on several high profile property developments and high rises over the years – although perhaps none quite as unique or with as many distinct characteristics as The Icon. “The nature of expanded aluminium mesh is such that it is formed by shearing and expanding aluminium sheet to create the ‘3D form’ effect. A visually appealing system for a façade, the shearing of the metal can present issues with very sharp edges, particularly in aggressive coastal environments,” Gareth explains.“Part of understanding this project was to comprehend as many elements as possible. Given the location was in St Kilda, with the bay just over 1.5km away, environmental considerations such as UV degradation, exposure to corrosive sea salts and prevailing winds needed to be considered.”After reviewing available data, such as Bureau of Meteorology weather patterns and local geography and topography maps, a specific duplex or two-layer powder finishing system was specified.“This consisted of a controlled preparation process for the expanded aluminium sheets. An epoxy barrier primer (was specified) to provide enhanced protection and to build the sharp edges in order to minimise issues associated with filiform corrosion. And the ultra-durability polyester powder top coat was developed in 34 distinct colours,” Gareth says.After the colour range was developed, it was applied by powder coating specialists Mansutti Bros. Lead by managing director Claude Mansutti, the team refinished hundreds of mesh panels over a period of nine months.“It was a major benefit to be using powder coating because, unlike liquid paints, powder is cured once it comes out of the oven and it’s ready to go once it’s cooled down. If they were painted, the drying phase could delay the process from refinish to installation by up to two weeks. It meant we were able to keep to a very strict schedule,” Claude says.“The project involved a lot of large spreadsheet work. There were 17 floors and over 30 colours, with panels in 15 sizes; it was quite a matrix to work with. But the end result is so different and so unique. It’s an interesting design and I’m sure it’s going to be a talking point for the area for many years.”

The PL-5700 is designed to work effectively with the interior louvre blades to provide unparalleled air intake and water protection performance. This model louvre was specified for the University of Sydney FAAS Building

APPLICATION: Road CellPROJECT LOCATION: Chan Chan PeruPROJECT DETAILS: Protecting Walkways and Preventing erosionPROJECT COMPLETION: Sep 2016Chan Chan, the largest City of the pre-Columbian era in South America is now an archaeological site in La Libertad Region, 5 kilometres west of Trujillo Peru. Chan Chan is located in the mouth of the Moche Valley and was the capital of the historical empire of the Chimor from 900 to1470, when they were defeated and incorporated into the Inca Empire. The city Chan Chan spanned 20km2 and had a dense urban centre of 6 km2.The increasing popularity of the site forced the authorities to consider how to protect the walkways and to provide drainage, to remove rain water from the site to prevent erosion. The solution was to use the Atlantis® Road CellTM 53mm drainage cell. This installation made Chan Chan the second World Heritage site in all of Peru to have a highly technical system of protection of the original pavement installed and it covered almost the entire tourist circuit with the exception of the funeral zone.A layer of water proof membrane was laid down on the walkway and the the Atlantis® Road CellTM 53mm drainage cells were clipped together on the water proof membrane and filled with gravel. Thus providing protection for the walkway and also providing a drain for directing rain water away from the archaeological site to ameliorate erosion. Also it facilitated the access of visitors, especially those with disabilities, by providing a firm stable walk way.In all 1,700 m2 of the Atlantis® Road CellTM 53mm drainage cell were laid, and filled with gravel.

GWA Bathrooms & Kitchens supplied a stylish collection of products to this project, boasting state of the art technologies and features that maximise efficiency by limiting unnecessary water wastage. Consequently, this collection has contributed significantly to the building’s superior green credentials.

The 52mm drainage cell has been used as normally in two guises. Firstly as a TurfcellTM grass reinforcement such as at Natural Designer Homes , a display home in Casuarina NSW. The photograph of the driveway is from about 1year ago, some 4 years from installation. As there are several cars in the family as well as work trucks the installation looks quite good.Secondly as a Gravel cellTM gravel retainer, such as that used at Leaf and Limb Nursery in Kin Kin Qld., where they use the 52mm cell in the walkways as this makes it easier for them to run the trolley through the gravel.However there is a third use for the 52mm drainage cell. That is as walk ways in mining camps. Traymark Industrial Caravans make the vans for accommodation for the workers and Atlantis® 52mm cells are supplied with each van to be used as a walk way to keep workers out of the mud and dirt when at their accommodation..Secondly as a Gravel cellTM gravel retainer, such as that used at Leaf and Limb Nursery in Kin Kin Qld., where they use the 52mm cell in the walkways as this makes it easier for them to run the trolley through the gravel.Now for another use: a client already was successfully using our 52mm drainage cell as reinforcement for parking bays beside a river and in August 2011, it occurred to him that he could extend the parking area into a boat ramp. Our 52mm drainage cell is made from recycled polypropylene with U. V. protection, in sheets being 480mm x 260mm x 52mm.Two tracks, being 0.96m in width were connected to the 52mm drainage cell in the parking area and also were secured by metal hook pegs to the drainage cell of the parking area. The tracks lead to a full width ramp (2.88m in width) into the water.To prevent the ramp from sinking fully into the silt, the ramp and adjacent section of the two tracks are formed by two layers of 52mm drainage cell connected to each other by cable ties. Metal hook pegs were also used to assist in holding the ramp in position.We contacted our client in August 2017 and he is very happy with the boat ramp which is still in use despite several floods, and constant exposure to the elements.Thus the high load bearing of approximately 4000t/sq. M and the long useful life of the 52mm drainage cell has permitted the 52mm drainage cell to be used and still being used in many ways.

Rondo partnered with contractors ‘Sydney Projects’ once again, along with architects ‘The Buchan Group – Sydney’ to develop and execute the proposal for this project which involved the re-development of the retail arcade through the ground floor level, along with the eastern portion of the casino to contain additional commercial/tourist facilities, external works to the existing tower building and landscaping and public domain works

This innovative, multi-level residential building in central Adelaide is fitted with water and energy efficient fixtures and fittings by GWA Bathrooms & Kitchens, in partnership with DFC/Housing. Located at 102 Waymouth Street, the building consists of 146 apartments for Housing SA and 30 youth service apartments.

The A4080 is ideal for projects looking for an economical solution, with a high free area and where water penetration will not cause significant problems. Today, 177 Pacific Highway Commercial Building still stands out in the vibrant and bustling area of North Sydney, for its unique and elegant design.

After nearly 100 years of serving the local community, the Petersham RSL club moved to a new home this year, in a redevelopment centred on style and comfort. Part of the design brief for the architects and developers was that the indoor spaces were comfortable for guests, particularly in reception, which can often feel the effects of wind and debris entering through open doors. The developers chose a fully automatic Tourniket revolving door from Boon Edam Australia to make a grand first impression to the classy new club, which was recently opened by Prime Minister Anthony Albanese. It is the same type of cost-effective entrance used by leading hospitality venues globally to protect patrons and workers against wind, weather, and pollution, while also controlling traffic flow and opening up new sheltered areas for productive amenities. Petersham RSL CEO, Danny Fitzgerald, said “The Boon Edam revolving door creates an impressive entrance to our modern club, and was the perfect fit for our redevelopment. With this door, Boon Edam met two key specification requirements – enhancing climate control inside the club, and enhancing personal comfort in the reception area.” A welcoming entrance The 3-wing Tourniket revolving door pictured has a height of 2,650mm and diameter of 2,800mm to allow ample room for entry and egress. It has four LED warm white downlights for a pleasant and welcoming experience. A powder coated black grey finish on the exterior of the door allows it to effortlessly blend in with the building’s overall aesthetic and design. Boon Edam Australia Managing Director Michael Fisher says that a major benefit of revolving doors is that they allow visitors and staff alike to enter into a new world inside – one that is calm, quiet, and protected against allergens and climactic extremes. “In addition to customising the door to the club’s aesthetic preferences, we worked closely with Petersham RSL to deliver the doors within a complex installation involving temporary doors while other elements of the façade and reception were completed, prior to the arrival and installation of the revolving door,” he said. Boon Edam Australia is a part of the globally leading revolving door manufacturer, Royal Boon Edam, and the door selected by the Petersham RSL is a type already used by architects, builders and specifiers for Fortune 500 companies globally and for major Australian hotels, clubs, banks, offices, legislatures, and buildings. “The teams worked well together, and the result was an outstanding front façade and entrance, which will have a long-term impact on climate control and comfort,” said Fisher. Always Open, Always Closed A key benefit of revolving door systems in addition to access control is energy conservation, with their “always open, always closed” functionality providing lower HVAC losses while increasing the temperature stability and comfort of people inside. These advantages have been proven in many of the world’s leading clubs, hospitals and hotels, where visitor comfort is paramount. “Think about how much air escapes when a sliding door opens, or how much dust, pollution, or pollen can enter the front reception area. With a revolving door, only one quadrant of air is moving around each time, providing a highly effective method of controlling the indoor climate,” said Fisher. Further economy and versatility are provided where required by night locking entrance options including electromechanical locks that can be unlocked with a key or by means of an optional key impulse switch.  “These climate control features are not always considered at the design stage, so Petersham RSL has shown great foresight by specifying these outcomes early,” added Fisher.

Rondo has supplied an external soffit ceiling frame for the Dubai Metro Station project. The Green Line of the Dubai Metro is the second Dubai Metro light rail line in Dubai. The route starts in Al Ghusais, and runs along Al Nahda Rd and Salahuddin Rd above ground. The Green line runs through Deira and Bur Dubai and generally runs parallel to Dubai Creek.

GWA Bathrooms & Kitchens supplied a full schedule of fittings for the Alluvion Tower project. Situated in the heart of Perth’s CBD, Alluvion sets the benchmark for office design and sustainability. GWA’s tapware, bathroom basins, urinals and toilet suites were selected both for the quality of their aesthetics and their distinctive, in-built technologies that limit unnecessary water wastage and associated costs.

Steve Domoney Architecture took on the challenge of designing a home for clients with children. This project came with a clear vision of a spacious family home, contemporary in line and warm in tone. The dining room has Capral AGS windows opening at exterior ground level to a fernery, while high-level Capral AGS 419 Flushline Framing System beyond the kitchen provides views to distant trees in the south-east. The formal lounge opens to a generous decking and garden behind.

Currently, Quest is on an aggressive expansion drive throughout Australia, with seven projects to be completed over the next 12 months. Specifically, the freshly completed Quest on Franklin in Central Adelaide of which, Rondo has provided over 200,000l/m worth of product. Working alongside Kyren Group, Ceiling Express and Cheesman Architects, Rondo delivered frequent technical design support, as well as stock level forecasting which was imperative to control the crane lifts.

Designed by Benson McCormack Architects and built by Hone Constructions. The curved glass elements seen at the ground level entry shopfronts and in the feature penthouse facades are key to the undulating design which becomes the signature for the “Wave” Apartments building. In particular the projecting curved façade at each end of the penthouse roof level is a major element of the architectural design and a feature that can be seen from afar. The sweep of the concrete rood appears to float above the skin of curved glass creating a dramatic visual effect.