"fabric membrane buildings inflatable structures"

Challenge750m2 roof with a large quantity of vents, air conditioning units and other equipment on the roof. Add to this problem damaged aging torch membrane, combined with Governments regulations regarding solar absorption and reflectivity of the building posed a real challenge for the applicator when determining a solution for the job.A second challenge for this job is the location of the building was located in the built up CBD of Parramatta with neighbours in close proximity, which meant the solution needed to be neighbourhood friendly.SolutionGiven the complexity of solution required for such a job AlphaGuard BIO is the only product which ticks all the boxes. AlphaGuard BIO is an extremely high performing composite waterproofing system, designed with a focus on roofing restoration. Due to AlphaGuard BIO being a liquid, it makes it ideal for jobs where there are machinery on the roof which needs to be worked around.AlphaGuard BIO has the ability to be installed over various existing roofing membranes in order to minimise tenant disruption and extend the life of the roof for an additional 20 years.It cures to form a durable rubber membrane surface that provides a lasting and easy-to clean waterproof coating. AlphaGuard BIO may be used to apply a seamless, monolithic waterproof membrane to concrete, primed metal, or existing roofing membrane surfaces.AlphaGuard BIO’s low VOC will minimise offensive odours to current tenants and applicators. The white top coat provides high solar reflectance, reducing the building’s operation costs and complying with Section J1.3(b) of the 2019 NCC.

About the ProjectThis Child Health and Learning facility in Manly, deliversspecialist child healthcare for up to 15,000 families a yearfrom rural, regional and remote New South Wales andbeyond.The new facility will integrate a state-of-the-art child schooland health service that will accommodate regional childrenand families nationwide.This six storey building includes school classrooms,consultant and observation rooms, a paediatric oral healthunit with a dental and orthodontics room, ophthalmology,occupational therapy, sensory rooms and a telecare centre.ChallengeOver 80% of construction litigation and defect claims are a result of water ingress, of that 80%, almost 30% of those are below grade issues. (City Futures Research Centre UNSW).The two biggest waterproofing challenges for this build were:1) Below Grade - Non structural Blinding Slab, 4 metres below sea level and less then 50 metres from Manly Beach. This build had decanters pumping over 1.3 million litres of water per day awayfrom the site during the construction phase.2) The creation of a waterproofing solution which would not fail if the membrane was penetrated, be it in the pre or post construction phase.Due to the proximity to the beach and the build having a raft slab in the basement, a standard cookie cutter below-grade waterproofing solution was not an option for this build.Tremco SolutionTremco were asked to provide a solution for this complex build. The biggest and most demanding waterproofing areas within the build that needed attention were:1) Below Grade - 50 metres from the ocean and 4 metres below sea level, we needed a reliable waterproofing solution, that would also be robust enough to withstand any punishment tradesdelivered post installation, we recommended and used Paraseal SW (Saltwater). Paraseal SW is a multi-layer sheet membrane waterproofing system consisting of a self-sealing, expandable layer of bentonite laminated to an impermeable, high density polyethylene (HDPE).2) iAuditor reporting- iAuditor is an onsite quality assurance program Tremco conduct for the builder and applicator to ensure our products are being installed correctly and to specification. This gives the builder the confidence that there will be no waterproofing defects within the build.Overall, both the builder and developer were happy with the end result, which provided the warranty and quality required of such a development.

The entire building also featured ceilings acoustically isolated from the old structure where heavy duty isolators were required to be incorporated into the Rondo KEY-LOCK Concealed Suspension System. Similarly Rondo had to design a supplementary suspension system beneath these ceilings to accept a secondary system to support some services and particularly architectural feature ceiling beneath.

Rondo became involved with the project in mid-June when approached about using our Studs to make up the main walls that separate the building into individual shop outlets. As there was no time for the Contractor to source structural steel (which would take up to five weeks).

Rondo worked closely with C&L Ceilings who were charged with the wall and ceiling contract. In order to be sure that the building’s external facade would remain structurally secure and adhere to the architectural detail, C&L installed Fibrous Cement Sheets, supported by heavy gauge Rondo components.

The $200 million Lend Lease Lakeside Joondalup Shopping Centre development opened in November 2014, making it the largest shopping destination in Western Australia. Contractors C & L Ceilings in conjunction with Rondo’s Technical Services Team designed pre-fabricated sections that could be built off-site and then transported to site complete, reducing installation costs and time delays.

Rondo will feature throughout the building utilising the popular KEY-LOCK Suspended Ceiling System, as well as Steel Stud and Track. When gazing out of the large open windows from the magnificent structures, the views of the city skyline and rolling hills are exceptional. Clyde Quay Wharf residents are undoubtedly treated to the best of both worlds with the epitome of urban living and coveted waterfront lifestyle.

This massive project took two years of construction to complete, and Rondo’s technical services team were able to provide design solutions for challenging areas in the project. This included a heavy gauge 150mm Steel Stud Wall Framing System which required alignment with and concealment of the structural frame of the building, and a 6 metre high internal dividing wall that was subjected to higher internal pressures due to the louvres installed.

THE CHALLENGE: House 30+ new HVAC&R mechanical plant equipment and vents. Retrofitted to the roof of a large, multi-level shopping centre without interrupting regular retail operations.THE SOLUTION: We supplied over 30 EasyMech MR (purlin mount) and Span+ (rafter mount), HVACR platforms in Kit form.Our Span+ (rafter-mount) system, was designed to be 100% penetration-free and installed on the surface of the roof over the rafters.We also supplied walkways, up & overs, and ladders – all in Kit form! Providing savings in cost and time.

About the ProjectThe ANZAC Memorial was designed as a sculptural monument, a unique collaboration between Architect Charles Bruce Dellit and sculptor George Rayner Hoff; it is arguably one of the finest examples of the union of architecture and art in Australia.The building is a striking architectural form, symmetrical on both axes. It uses elements reminiscent of traditional Gothic architecture (buttresses, cathedral windows, high ceilings) in the Art Deco style. The Memorial is adorned externally with twenty sculptures representing the units of the Australian Imperial Force (AIF). These are the sentinels of the building, keeping watch while representing the fallen to whom the building is dedicated.Bruce Dellit’s vision for the Memorial included a still pool bounded by poplars to the north of the building (included for their significant symbolic association with the battles in France and Belgium), and a cascading fountain to the south.The Hall of Service, at the centre of the Centenary Extension, is a civic space that architecturally and artistically mirrors the Hall of Silence. The Hall was named in acknowledgment of the original Memorial halls and to recognise more than a century of service by Australian servicemen and servicewomen. At the threshold to the space are the words: “NSW Service with and for All Australians”.The ChallengeWhen restoring a National War Monument visited by hundreds of thousands of people, you need to provide the highest quality results and finishes expected of such a significant structure in our history. The challenge here, comes from creating a restoration solution on a building which was designed in the early 1930’s, which will be flexible enough to maintain the architects core design features but also created and executed within a tight time frame in time for ANZAC day. The solution needed to encompass modern technology with traditional design features to ensure the restoration lasts for the next 100 years as a memorial to our fallen heroes.Tremco SolutionTremco worked closely with Sure Seal and Built to provide a solution which was both timely and high quality. the installers long standing relationship with Tremco, a number of unique solutions, together with a 20 year warranty period proved a success.Over 15,000m2 of Tremco products were installed on this historic site. Tremco provided regular iAudit reports on the job site (iAudits is a quality control measure used to ensure the products are being applied consistently to maintain warranty conditions) During regular site visits, Tremco were able to provide a high level of customised Technical information and design advice to ensure the project ran smoothly and to Built’s expectations.

During the initial stages, Express Interiors - one of the largest contracting firms in Victoria worked closely with the Rondo team to provide details for operable walls (reduced the need for structural steel) and stacked walls (alternative to structural steel major saving for the builder).

The brand new state-of-the-art $177 million Brisbane International Cruise Terminal was completed in mid-2020 and will serve as a gateway for the Queensland tourismsector. The 9,300m² terminal was designed by Arkhefield in collaboration with Arup will provide visitors with a world class experience.The public spaces including the internal walkways, communal areas and departure lounge featured 1,500m² of Flowcoat Terrosso in four bespoke colour combinations.The decorative resin-based flooring system was chosen to provide a decorative, seamless flooring system that would not only create a luxurious and welcome environment, but withstand the expected foot traffic.A further 1,200m² of Deckshield ID was applied to the foot bridge, providing passengers with a slip resistant and safe surface as they board or disembark some of the biggest cruise ships in the world.Tremco CPG Australia’s portfolio of industry leading products provided not just a flooring solution for the world-glass tourism facility. In addition to the Flowcreteflooring systems, Tremco CPG Australia also provided the structural glazing silicone Proglaze II to a total of 218 glass panels.

Occupying a 2134m2 block of premium land, Leopold residential apartments is one of the newest commercial/residential developments in Melbourne’s residential and business district. The project involved the internal demolition of existing commercial fit out, the construction of an additional six levels and the fit-out of 174 residential apartments as well as four office tenancies. The works undertaken comprised of a new wall facade, the attachment of 97 new balconies to the existing structure, and installation of a structural steel transfer level with lightweight floor system (Powerscope).

Macquarie University’s Incubator building represents education, technology and innovation. This building may not be the tallest or largest mass timber structure in Australia, but should be equally celebrated for its total commitment to prefabricated timber. The Macquarie University Incubator was a collaboration between Lipman, Architectus, Strongbuild, Taylor Thompson Whitting, Arup and Against the Grain. The design required a prefabricated structure, to enable future dismantle, relocation and reassembly. Through the unique collaboration of the entire team the building was erected in just 37 days and the entire project completed within 6 months.

Mass timber is transforming from an innovative new method of construction to a must-have in mid-rise building design, and this RMIT NAS (New Academic Street) project paved the way for Australia to become a leader in mass timber construction. One building in particular, the ‘Garden Building’, designed by NMBW Architects and TCL was a stand out for innovation and creativity. The spectacular design used a 6m mass timber grid and due to the visibility of the structure, glulam was the preferred option to CLT. Victorian ash was chosen as it is an attractive timber, ideal for ‘seen structure’.

Designed by Richard Lutze. This project won the 2017 Building Designers Association of Australia Design Award for Public Buildings/Structures. The building has been designed with modern conveniences while also ensuring a sustainable passive layout, with large openable areas facing north overlooking rural vistas, providing good natural light and ventilation to the classrooms and laboratory through the use of Breezway Louvre Windows.

It was even necessary to design bulkhead framing with a staggered stud configuration to meet acoustic requirements. Similarly, many of these designs also had to incorporate Square Hollow Section (SHS) posts to meet structural requirements. Rondo Technical Representative Max Dessmann worked closely with the contractor Interior Works and Rondo’s Technical Services Team to develop the required design solutions.

Fogarty Bros, who are the main commercial plasters in Bundaberg for over 15 years, were contracted to install the internal and external linings. Due to the region’s conditions, external wall designs for cyclonic conditions were needed, pre-construction meetings were needed to discuss benefits and limitations. The builder used extra structural steel where needed and custom suit windows to fit the Rondo design.

45 Clarence St, is a striking office tower located in the busy western corridor of Sydney’s commercial district, with extensive views of Darling Harbour and Barangaroo, it is a prestigious building with various companies operating inside this office building, such as Business Sydney and CBRE.As part of the refurbishment, which included the lobby upgrade, CS worked extensively with the property management team, architect, builder, and installer to deliver the architectural grilles for this project. There was a unique vision to use the Econoline indoors in a commercial building instead of using it as an outdoor vision barrier grille. The focus of this refurbishment was to provide a bespoke architectural grille to line the ceiling and vertical walls of the lobby and modernise the building.The Econoline is typically used in locations such as parking garages, concealing mechanical equipment and for many refacing applications. Having the Econoline installed in a commercial building is a unique opportunity that will result in more products being used for aesthetic purposes. The challenge that was faced with the Econoline being used indoors was that the tapered vertical walls on two sides as grilles needed to be a certain distance above ground level and to be structurally sound.On completion, the lobby at 45 Clarence St Sydney is unique from your typical office building. This is also exciting for CS, to be part of a project that has been transformative and elegant in design.

About the ProjectIn response to unprecedented demand, Rouse Garden is filling the void of modern-day homes close to trains, shops & jobs at the most competitive price on the market. Featuring the diversity of 1, 2 & 3 bedroom homes, there’s something for everyone in the most wondrous apartments to grace Rouse Hill. From floor to ceiling glass walls, timber hardwood flooring in your living room and a private rooftop garden terrace complete with BBQ and lounge areas. The quality of design is worthy of being marvelled at. Living rooms have been purposed to allow seamless indoor and outdoor transitions, blurring the boundaries between inside and out and elevating your home to new heights.ChallengeWhen you are building in one of the premier locations in Norwest Sydney, it’s all about the ding to match the lifestyle your new residents demand from your new community.  Presented with tight detail, the look, the feel and the performance of your build time-lines, and expectations of high quality, Hydraseal were tasked with working on Rouse Gardens. Waterproofing both the internals and roof of the building, the builder demanded warranties to match the project requirements and to deliver a quality finish demanded of this high profile project.To streamline this project, availability of stock and ease of application were key product requirements needed from the project, which Tremco were tasked with delivering.Tremco SolutionVulkem H2 Plus, Vulkem NEM, Tremflex50, Vulkem 951Hydraseal partnered with Tremco for a few reasons, primarily trust built up through a longstanding relationship provided the support necessary for the key for the success in this project.The versatility of Vulkem NEM being able to be used for internal wet areas, in conjunction with Vulkem H2, as well as for outdoor areas under Vulkem 951 NF allowed for fast and consistent application of waterproofing on the project, given the tight time frames, all backed with long warranties to match product performance.The combination of Vulkem NEM, Vulkem 951 NF and Vulkem H2 provided the warranties demanded by the builder which resulted in both Builder, and Applicator very satisfied with the job. 

MP Group were charged with managing the installation and finishing of all internal and external walls and this is also where Rondo offered our support. With the external structural steel framing having been installed 150mm out of position, Rondo’s Technical Services Team came to the rescue and designed an external stud wall system using our MAXIframe External Wall Framing System to ‘fill the gap,’ including design of special header bracing details to support the wall.

Melbourne’s CBD features a $230 million Victoria Police ‘super’ complex. Designed by Woods Bagot Architects, the 12 level, 27,000m2 project provided Rondo Victoria’s Charlie Khoury with the opportunity to work with their project team in the early design process to come up with solutions to meet their architectural requirements. Together with Rondo’s technical services engineers many solutions were found such as how to satisfy a requirement for the many free-standing walls to be constructed without using structural steel.

This project is a great example where the client wanted to realise the instant savings of Con-form Group’s engineer certified, rafter mounted system, over costly traditional mounting systems.With a mixture of our EasyMech MR (purlin-mounted), and Span+ (rafter-mounted), HVAC platforms - the client was able to successfully mount all mechanical units across the roof of this mixed-use development in Tasmania.Spanning over 9 metres, this retrofitted Span+ (rafter-mounted), installation answered the clients brief in more ways than one.Rated to 2.5kPa and attached to Con-form Groups proprietary steel stub columns – this platform and it’s screens were retrofitted to the roof of this shopping centre within 2 days.Paired with our Louvre airflow and Classic Screen Walls.

he developments $247.3m price tag makes it marginally more expensive than the $246m Adelaide University building next door. HIB will house the Centre for Cancer Biology and UniSA’s pharmacy school, with 450 researchers between them. Rondo’s involvement included providing ceiling and wall systems using our Shaftwall One-Way Erected System, KEY-LOCK Concealed Ceiling System and PANTHER Access Panels to create the desired effect.

This new building was constructed by Lend Lease with Foxville Projects Group (NSW) being appointed as the lead fit out contractor. Rondo supplied an extensive range of ceiling and partition systems, as well as technical support throughout the project, which included design for all the internal walls, shelf loads, balustrade design utilising stud and track as well as ongoing support throughout the project construction period in regards to Rondo products within the design criteria.

Rondo provided technical design specifications when it came to the development and execution of an SAW Tooth ceiling which is featured in the main areas of the school building. BSHS will feature Rondo’s popular KEY-LOCK Suspended Ceiling System, Steel Stud and Track and EXANGLE products throughout the internal building frame.

Since the project commenced work in August 2011, Rondo provided technical support by way of weekly site inspections and specified various wall types for the external Steel Stud walls which was utilised throughout the entire building. This coincided with use of the Rondo KEY-LOCK Furring Channel System which also focused on all external and internal ceilings of the building.

CBS-A and Composite Industries began construction back in September 2015. The Rondo technical team provided ongoing support on the engineering of blade walls to façade in the main hotel building and car park.

Rondo worked closely with Future Carpentry and Ceilings to meet the project requirements on time and were chosen due to our strong 15-year relationship. However, the $70 million re-development wasn’t without its challenges, for instance, the speed by which the building went up meant there was no time to waste.

Rondo supplied Steel Stud and Track, KEY-LOCK Furring Channel and Top Cross Rail, and EXANGLE P50 Shadowline Stopping Angle to complete the base fit out and wall linings on 45 levels of the building.

Rondo were approached by Expoconti to supply the necessary wall and ceiling component of the build. The tower features multiple “loft” style apartments, which allows it to nestle one and two-bedroom apartments in an overlapping formation, giving both high-ceiling living areas and lofty mezzanine interior spaces.

John Holland recently built the largest private Hospital in South Australia, adding to its already suburb health care facilities. Rondo worked alongside Contractor Brighton Australia and Architect STH Architects, to deliver this state-of-the-art facility. Rondo supported the $400m build with a range of products and systems.

Rondo has worked alongside award winning NWCI on the Brisbane Supreme Court House based in central Brisbane since 2008. The $570million project crosses both traditional and modern features off their list, remaining true to their heritage whilst tying in the new wave of environmentally friendly and sustainably efficient buildings.

Working directly with sub-contractors Donnybrook Interiors and Architectural Ceiling Systems, Rondo delivered the walls and ceilings for this unique $15million build.

Construction started on Burj Khalifa in 2004 before the building was officially opened in January 2010, although ceiling systems are still being supplied to the office areas on level 160. At the peak of construction, over 12,000 workers were onsite every day from 30 contracting companies, representing more than 100 different nationalities.

Rondo has so far provided over 10,000lm of various wall and ceiling systems, including Rondo Steel Stud Drywall Framing System, KEY-LOCK Suspended Ceiling System and DUO Exposed Grid Ceiling System. More complicated designs arose when it was discovered that the high cyclonic winds would affect the facade of the building.