"马拉加做办个假证刻章制作各种证件【telegram/ WHATSApp:十447378502403】💯4.html"

Rondo Steel Stud Drywall Framing System will be used in the construction of the Dubai International Airport - Concourse 4 project.

The £70 million project saw SAS International design and manufacture bespoke spun alum­inium profiled discs, acoustic metal wall panelling and System 600 rafts in the new terminal. The architects 3D Reid had to make the building light, airy and modern yet the façade and various materials used within the terminal had to withstand potential of a security breach. All products installed ‘land-side’ were required to meet the requirements of Aviation Security in Airport Development (ASIAD). The result answers aesthetic demands, yet provides the highest level of performance for the requirements of the building. For the design to be realised, square aluminium sheets were cut by the manufacturer into a circle and spun into a dome. Installation in such an environment means safety cables had to be attached to each disc, wall panel, tile and raft to ensure they do not fall and cause injury. Allowance for safety cables to be attached had to be taken into consideration during the design phase. Large vertical wall panels with an ultra-micro perforation were also specified to provide the necessary acoustic properties required for this vast open space. The very fine 0.7mm perforation, with 1% open area, helps to manage acoustics within the large open spaced terminal. The off-site modular manufacture of the architectural metalwork products meant installation was quicker, which causes less disruption to such a busy environment, and in addition there is no waste on site. Aesthetic versatility can be achieved using SAS International Architectural Metalwork throughout projects. It also allows for inte­gration of M&E services into the building design while meeting design demands and durability requirements. The range includes acoustic baffles, acoustic wall panels, air handling units, bespoke ceilings, and column casings.

CASE STUDYS LISTED ABOVE IN PICTURE 4

Designed by Group 4 Architects and built by De Luca Corporation the project includes: the Bunnings Warehouse building (17,719sqm), and three other separate buildings .Metroll is proud to have been involved in the supply of many Bunnings Warehouse projects including the Keperra store.

Rondo provided a range of market leading wall and ceiling systems for both buildings 3 and 4. Our KEYLOCK Concealed Suspended Ceiling System and Steel Stud and Track Wall Framing System were used for the internal fit out, completed by AUSTRAL Interiors. SMTM Projects used our 1.15 BMT Stud and Track with top hats.

In the bathrooms, water-saving technologies were installed, including the 4-Star WELS rated Caroma Cube Wall-Faced Invisi Series II Toilet Suite, with its innovative Smartflush® technology and concealed cistern. The Caroma Cube Extension Wall Basin is matched with the WELS 5-star rated Caroma Liano Basin Mixer and completed with the Caroma Liano range of accessories.

When Fed Square was first opened in 2002 the original design expected 4 million visitors per annum. Fed Square now has 10 million visitors per annum and so have undergone an upgrade project of their main public amenities in St Paul's Court. Dyson Airblade Tap hand dryers have been implemented on this project to minimize the mess from paper waste and efforts involved with re-stocking of paper towers.

The new Royal Adelaide Hospital (newRAH) is a significant project for Rondo, with our Engineering team providing extensive design support and developing innovative system solutions for over two and a half years prior to the commencement of construction. Now with construction underway, Rondo has continued to play a major role, supporting site contractor, Brighton Australia, with the design and manufacture of products that meet the projects’ ‘Category 4’ design requirements, which includes specifications for Seismic designs.

Commissioned by Hobson Bay City Council as part of the PA Burns Reserve and Altona Dog Beach Upgrade, Britex supplied a set of purpose built, custom designed Vandal Resistant Stainless Steel Dog Showers. Accessible Drinking Fountains with additional Dog Bowl were also supplied. The Customised Britex Dog Shower supplied included: 4 x Vandal Resistant Stainless Steel Square Dog Showers Manufactured from Marine Grade Stainless Steel Various heights supplied, 800mm and 1200mm options Integrated Lead Connectors • Vandal Resistant Time Flow Tapware Multiple Shower Sets installed at different heights for small and big dogs Integrated Safety Grab Rails

The legendary Peninsula Hotel in the heart of Paris was undergoing a large renovation project and the project’s architect, who specialised in the restoration of exceptional establishments, decided on three Boon Edam Crystal Tourniket revolving doors and one Circleslide to fit their brief of installing a transparent and luxurious entrance. Built in 1908 to host the palace “Hotel Majestic”, this palace hotel was due for of an extensive renovation to offer modern facilities, standards and technology while still preserving its historic roots. The restoration took 4 years to complete and the end result is a five-star contemporary hotel which maintains and respects the spirit of the original institution. The project involved working with the finest artisans with an ancestral knowledge of this landmark building. The architectural renovation was led by AFFINE DESIGN, one of the major architecture and interior design offices in Paris

About the ProjectThis Child Health and Learning facility in Manly, deliversspecialist child healthcare for up to 15,000 families a yearfrom rural, regional and remote New South Wales andbeyond.The new facility will integrate a state-of-the-art child schooland health service that will accommodate regional childrenand families nationwide.This six storey building includes school classrooms,consultant and observation rooms, a paediatric oral healthunit with a dental and orthodontics room, ophthalmology,occupational therapy, sensory rooms and a telecare centre.ChallengeOver 80% of construction litigation and defect claims are a result of water ingress, of that 80%, almost 30% of those are below grade issues. (City Futures Research Centre UNSW).The two biggest waterproofing challenges for this build were:1) Below Grade - Non structural Blinding Slab, 4 metres below sea level and less then 50 metres from Manly Beach. This build had decanters pumping over 1.3 million litres of water per day awayfrom the site during the construction phase.2) The creation of a waterproofing solution which would not fail if the membrane was penetrated, be it in the pre or post construction phase.Due to the proximity to the beach and the build having a raft slab in the basement, a standard cookie cutter below-grade waterproofing solution was not an option for this build.Tremco SolutionTremco were asked to provide a solution for this complex build. The biggest and most demanding waterproofing areas within the build that needed attention were:1) Below Grade - 50 metres from the ocean and 4 metres below sea level, we needed a reliable waterproofing solution, that would also be robust enough to withstand any punishment tradesdelivered post installation, we recommended and used Paraseal SW (Saltwater). Paraseal SW is a multi-layer sheet membrane waterproofing system consisting of a self-sealing, expandable layer of bentonite laminated to an impermeable, high density polyethylene (HDPE).2) iAuditor reporting- iAuditor is an onsite quality assurance program Tremco conduct for the builder and applicator to ensure our products are being installed correctly and to specification. This gives the builder the confidence that there will be no waterproofing defects within the build.Overall, both the builder and developer were happy with the end result, which provided the warranty and quality required of such a development.

Imagine waking up in this 4-star luxury hotel with panoramic view of the IJ and the city of Amsterdam. Hotel Jakarta: a BREEAM Excellent certified energy-neutral hotel in Amsterdam. Designed with sustainability in mind. Unique for the Netherlands is the 30-meter-high timber structure of the hotel. All columns, ceilings and frames are made from natural, FSC or PEFC certified wood. The south and east façades are covered with 700 m2 of building-integrated solar energy panels (BIPV panels). The glass roof that covers the atrium also contains BIPV cells that, in addition to collecting energy, also function as sun blinds for the subtropical inner garden. The atrium is the center of the hotel and works as a temperature controller in both summer and winter. On each side of the building, rooms have their own covered outdoor space that functions as a structural awning. A custom made revolving door provides access to the hotel where there is a dynamic public area with various bars, restaurants, coffee corners and a wellness center. This transparent revolving door is almost 6 meters high and fits perfectly with the appearance of the facade. In addition, this type of entrance solution is in line with the sustainability requirements of the building.

The 52mm drainage cell has been used as normally in two guises. Firstly as a TurfcellTM grass reinforcement such as at Natural Designer Homes , a display home in Casuarina NSW. The photograph of the driveway is from about 1year ago, some 4 years from installation. As there are several cars in the family as well as work trucks the installation looks quite good.Secondly as a Gravel cellTM gravel retainer, such as that used at Leaf and Limb Nursery in Kin Kin Qld., where they use the 52mm cell in the walkways as this makes it easier for them to run the trolley through the gravel.However there is a third use for the 52mm drainage cell. That is as walk ways in mining camps. Traymark Industrial Caravans make the vans for accommodation for the workers and Atlantis® 52mm cells are supplied with each van to be used as a walk way to keep workers out of the mud and dirt when at their accommodation..Secondly as a Gravel cellTM gravel retainer, such as that used at Leaf and Limb Nursery in Kin Kin Qld., where they use the 52mm cell in the walkways as this makes it easier for them to run the trolley through the gravel.Now for another use: a client already was successfully using our 52mm drainage cell as reinforcement for parking bays beside a river and in August 2011, it occurred to him that he could extend the parking area into a boat ramp. Our 52mm drainage cell is made from recycled polypropylene with U. V. protection, in sheets being 480mm x 260mm x 52mm.Two tracks, being 0.96m in width were connected to the 52mm drainage cell in the parking area and also were secured by metal hook pegs to the drainage cell of the parking area. The tracks lead to a full width ramp (2.88m in width) into the water.To prevent the ramp from sinking fully into the silt, the ramp and adjacent section of the two tracks are formed by two layers of 52mm drainage cell connected to each other by cable ties. Metal hook pegs were also used to assist in holding the ramp in position.We contacted our client in August 2017 and he is very happy with the boat ramp which is still in use despite several floods, and constant exposure to the elements.Thus the high load bearing of approximately 4000t/sq. M and the long useful life of the 52mm drainage cell has permitted the 52mm drainage cell to be used and still being used in many ways.

The Gateway building In Sydney’s Circular Quay is Australia’s first office tower to use fully integrated touchless 3D fingerprint scanning to allow authorised office workers and guests into the building. The building’s new entrance involves a complex integration of security and technology experts, including Boon Edam, Schindler Lifts, Honeywell and IDEMIA (the manufacturers of MorphoWave fingerprint scanning technology). The solution had to work seamlessly to enhance the user experience and building security for tenants and visitors at the 46-storey landmark building in Sydney’s CBD, owned by Dexus Wholesale Property Fund. Boon Edam delivered the entrance security solution, with Lifeline Speedlane Swing speed gates that are the slimmest in the market, which added to the aesthetics, and helped with design considerations within the width of the lift lobbies. Rising Demand by Tenants for Increased Protection The upgrade project required an entrance security system that incorporated sophisticated security yet kept an aesthetically pleasing and unobtrusive lobby. The ideal solution was found by integrating Boon Edam speed gates, MorphoWave fingerprint scanners mounted on a coordinating pedestal (the Lifeline Boost), Schindler Lift destination control and Honeywell access control technology. This was a response to increasing demands by building occupants to improve the entry security measures to better cater for the protection of employees, visitors and valuable data. A Complex, yet Perfect Orchestration Gateway’s access solution includes a bank of sleek and stylish security speed gates (Boon Edam’s Lifeline Speedlane Swing), which are seamlessly integrated with touchless and intelligent elevator destination control (Schindler Port’s PORT 4 mini) and security access via a biometric fingerprint scanning (IDEMIA’s MorphoWave) – all at one point, enabling quick, accurate and seamless entry to secured areas. These technologies are all controlled by Honeywell’s access control system. Mr Stephen Hodge, Senior Project Manager, Dexus added that “with so many stakeholders, and a strong need for reliability and quality, it was important that everyone knew the goals of the project and worked well together. I’m pleased to say that it was like a perfect jigsaw and everything came together smoothly.” “What was important to Dexus is that we were pushing the boundaries to create better experiences, but we’re only doing so with proven products. Boon Edam’s speed gates have been installed globally and locally, and this gave us added confidence that they were the right product for this forward-looking project,” he said.

Termi Home & Commercial (SA) were proud to be a part of the historic Norwood Oval Redevelopment project in Adelaide, South Australia. As one of the most iconic football grounds in Adelaide only a non chemical termite management solution would do. We designed and installed the Termimesh System keeping in mind both the historical significance and the new facilities.The suitability of the Termimesh system for this project is based on its flexibility, which was necessary due to complex external geometry of the new construction and integration with the existing buildings. This presented challenges in performing remedial work. For example the Sir Edwin Smith Grandstand is heritage listed meaning minimal work was allowed to the external façade. This is where the strength of our termite management system lies. It can be customised for each individual project. Our estimating and design team will work alongside the architect, marking up plans and explaining how the system is applied to the design. Which in the case of the Norwood Oval was extremely important. We are on hand during the construction phase to iron out any challenges that may arise ensuring the installation process is simple, smooth and straightforward.Termimesh has maintained our position as market leader in termite protection in the South Australian construction industry for over 25 years, with a strong domestic and commercial portfolio. We are one of few companies that are triple certified to AS48001, ISO9001 and ISO14001 which delivers additional peace of mind for our clients.CONSTRUCTION TEAMSchiavello ConstructionOur team has a good relationship with the lead contractor, Schiavello, having worked on past projects together. They knew our capability and after a detailed review of the construction programme, we were sure we could meet their requirements. As a supporter and sponsor of the Norwood Football Club, Schiavello recognised the significance of the project for the community.  PROJECT DETAILSClient                          City of Norwood, Payneham & St Peters. Specifying Architects                                    Tridente ArchitectsInstallation Year                                              2019Installation Duration                                      7 monthsProject Value                                                    $9 mil TECHNICAL DETAILSInstallation Type                                             NumberService penetrations                                     200Column blockouts                                          7.5 LM                 Cluster penetrations                                     4Control joints                                                   315 LMConstruction joints                                        73 LMSaw cut service penetrations                    147 LMConcrete slab pours                                      NumerousPerimeter                                                          147 LMKey Termimesh Personnel                          Drew Wilson- Account Development ManagerShane Waye, Senior EstimatorAnthony Bennett- Operations Field Manager

Acrovyn by Design® from Construction Specialties, was specifically chosen for the new Veterinary Specialist Services (VSS) Hospital in Jindalee, Brisbane, Queensland. The overall objective of the project was to create a bright and welcoming space, as well as an extremely hygienic care environment for the veterinary doctors and staff, the patients (pets) and their owners.The combination of both functionality and design flexibility available with Acrovyn by Design® has allowed the creative “cute pet theme” to be installed behind the wash basins as splash-backs. The images used include a collection of cute animals such as kittens and puppies, which could very easily be executed with the design flexibility and functionality of Acrovyn by Design® wall panel sheets.Veterinary hospitals and lobbies are high traffic environments with a significant amount of equipment, including trolleys and stretchers that can scrape or bump against walls. In addition, they have strict cleaning requirements for high hygiene standards that often requires the use of harsh chemicals, such as bleach, to disinfect hard surfaces.The client’s mission statement is to “provide the best possible care”. To this end, they have 4 different locations around Queensland all operating a 24-hour referral and emergency animal hospital. All facilities have state-of-the-art equipment with experienced and helpful staff. The first of the four hospitals opened to the public in 2000.Acrovyn by Design® has a proven reputation as the preferred choice with many major hospital projects across Australia, including The Royal Hobart Hospital, The Memorial Hospital Adelaide, The Royal Melbourne Hospital and Adelaide’s Calvary Hospital to name a few. It is wonderful to see that the unique qualities of Acrovyn by Design® are now being recognized as suitable for use in the care of our much-loved pets undergoing veterinary care as well.Did you know that the number of Australians who are adopting or fostering pets since the COVID-19 restrictions were introduced has exploded? According to the RSPCA, many people are now adopting pets because they feel that they finally have the time to settle a new animal into their home. It is also believed that home isolation has increased the desire among many single people for a companion. The RSPCA has reported a 45% increase in dog adoptions and a 20% increase in cat adoptions since COVID19 began.Consider Acrovyn by Design® for your next project; for design flexibility, impact resistance and easy to clean maintenance in veterinary hospital environments. In addition, Acrovyn by Design® allows for fast installation when faced with tight project schedules in 24/7, critical care operating workplaces.