"able canopies ltd"

RagingWire is one of the largest and most solid data centers in the world. They were one of the first companies that helped to build the multi-billion dollar global data center co-location industry. Now, RagingWire is the data center platform of NTT Communications in North America, which operates 140 data centers in 20 countries worldwide. RagingWire uses Tourlock security revolving doors at its Ashburn VA3 Data Center and its Sacramento CA3 Data Center. They are part of RagingWire’s larger portfolio of data centers in Ashburn, Northern California and Dallas, Texas.

After nearly 100 years of serving the local community, the Petersham RSL club moved to a new home this year, in a redevelopment centred on style and comfort. Part of the design brief for the architects and developers was that the indoor spaces were comfortable for guests, particularly in reception, which can often feel the effects of wind and debris entering through open doors. The developers chose a fully automatic Tourniket revolving door from Boon Edam Australia to make a grand first impression to the classy new club, which was recently opened by Prime Minister Anthony Albanese. It is the same type of cost-effective entrance used by leading hospitality venues globally to protect patrons and workers against wind, weather, and pollution, while also controlling traffic flow and opening up new sheltered areas for productive amenities. Petersham RSL CEO, Danny Fitzgerald, said “The Boon Edam revolving door creates an impressive entrance to our modern club, and was the perfect fit for our redevelopment. With this door, Boon Edam met two key specification requirements – enhancing climate control inside the club, and enhancing personal comfort in the reception area.” A welcoming entrance The 3-wing Tourniket revolving door pictured has a height of 2,650mm and diameter of 2,800mm to allow ample room for entry and egress. It has four LED warm white downlights for a pleasant and welcoming experience. A powder coated black grey finish on the exterior of the door allows it to effortlessly blend in with the building’s overall aesthetic and design. Boon Edam Australia Managing Director Michael Fisher says that a major benefit of revolving doors is that they allow visitors and staff alike to enter into a new world inside – one that is calm, quiet, and protected against allergens and climactic extremes. “In addition to customising the door to the club’s aesthetic preferences, we worked closely with Petersham RSL to deliver the doors within a complex installation involving temporary doors while other elements of the façade and reception were completed, prior to the arrival and installation of the revolving door,” he said. Boon Edam Australia is a part of the globally leading revolving door manufacturer, Royal Boon Edam, and the door selected by the Petersham RSL is a type already used by architects, builders and specifiers for Fortune 500 companies globally and for major Australian hotels, clubs, banks, offices, legislatures, and buildings. “The teams worked well together, and the result was an outstanding front façade and entrance, which will have a long-term impact on climate control and comfort,” said Fisher. Always Open, Always Closed A key benefit of revolving door systems in addition to access control is energy conservation, with their “always open, always closed” functionality providing lower HVAC losses while increasing the temperature stability and comfort of people inside. These advantages have been proven in many of the world’s leading clubs, hospitals and hotels, where visitor comfort is paramount. “Think about how much air escapes when a sliding door opens, or how much dust, pollution, or pollen can enter the front reception area. With a revolving door, only one quadrant of air is moving around each time, providing a highly effective method of controlling the indoor climate,” said Fisher. Further economy and versatility are provided where required by night locking entrance options including electromechanical locks that can be unlocked with a key or by means of an optional key impulse switch.  “These climate control features are not always considered at the design stage, so Petersham RSL has shown great foresight by specifying these outcomes early,” added Fisher.

Designed by Tony Owen Partners, Breezway Altair Louvre Windows were recommended to the Developer by the Architects at Tony Owen Partners due to their visually appealing aesthetics, the products full certification and compliance with Australian Standards, and Breezway’s strong reputation in the window industry. Altair Louvres with the Stronghold System have been strategically placed on the corner of the building as a key visual feature. Being a high quality window system, Altair Louvres will provide protection from the elements and are restricted to comply with Fall Prevention requirements.

There were two sets of challenges involved in the Rosewood Aged Care.Firstly, waterproofing the basement. The basement was excavated around a heritage-listed building, which had to stay undamaged for the duration of the works. Piles and shotcrete were implemented for the construction, but there was no scope to install a membrane due to space and other limitations. The Markham BASE-TECT system was ideal for this situation.Second were the requirements for moisture control and permanent hygiene protection for the interior floor slabs of the residential parts of the building. This is a more routine challenge, faced by aged care facilities with concrete floor slabs. AQURON 2000 MEDI+ was selected for concrete curing enhancement and permanent hygiene sealing.

The Farr Institute in Edinburgh is a collaboration between six Scottish Universities and the NHS National Services Scotland. They aim to place the country as a global leader in health informatics research whilst improving the health of the Scottish population. 30,000 sq. ft. has been fitted out to accommodate Bio Incubator laboratories and offices together with meeting, conference and dining facilities. The remainder of the building will accommodate laboratories and offices for life science research. SAS International’s acoustic baffles were specified to meet acoustic demand and make the most of the high ceilings and breathable space. The colours, baffle layout and service integration were carefully co-ordinated to the brief. SAS130 and SAS330 were specified and installed in the central core. Both systems offer quick and easy access to otherwise hidden mechanical and electrical systems. With SAS130, tiles can be lifted out to gain access to the ceiling void. SAS330’s hinge notch allows tiles to be hung vertically from C-Profiles, providing unobstructed access to the ceiling void. Ray Kwiecinski at Michael Laird Architects gave the below quote on working with SAS International; “MLA has specified a variety of SAS International’s lay-in grid ceiling systems over the years and we have always been extremely satisfied with the finished product. At the Farr Institute however, we decided to create a feature of the structural soffits and the M&E services and, by careful coordination of these services, the steel beams… [With] the SAS Baffle System and SAS Raft System 600, we were able to create an open, collaborative and exciting office environment whilst maintaining a high degree of sound absorbency. Our Client is delighted with the results as are we.” The Institute’s independent research will support innovation in the public sector, leading to advances in preventative medicine, improvements in NHS care and better development of commercial drugs and diagnostics.

The City of Boston is known for many things – from Fenway Park to the Boston Marathon to the bar from Cheers, the city is full of iconic landmarks, events, cultural assets, education centers, and more. The City is also recognised for its vast history, especially downtown, where hundred-year-old buildings have been preserved or restored. There is also a mixture of new property development, including 33 Congress Street, in the heart of the financial district, which combines the best of historical design with new construction. 33 Congress incorporates more than 400,000 square feet of office and retail space, transforming the historic neighborhood and positioning the area as a dynamic downtown destination. The project was designed by Arrowstreet, an award-winning architecture and design firm, and was led by Jason King, AIA, LEED, AP, BD+C, Senior Associate for Arrowstreet. Blending Historical Features with a Modern Design According to King, the 33 Congress Street building consisted of three different structures that were built at separate times: in 1904, 1906, and in 1922 and then all combined into one space. While the space functioned as one building, there were three separate elevator cores, sets of restrooms, sets of stairs, and more. Those entities needed to be reconfigured into one. The most striking feature of 33 Congress is a new, modern glass and steel structure, containing 6 additional floors of office space that sits on top of the original three masonry buildings. Another important project goal was to upgrade the main lobby to a modern design that allowed public access, increased security for building employees, and respected several historical aspects. “We needed a way to get people into the new, main elevator lobby quickly due to the high volume of traffic that we were anticipating would take place after the redesign,” King said. “We also wanted to create an entrance that would create a better flow of entry from the sidewalk into the building.” The original building had an existing revolving door, but it was small and surrounded by stone. “It was dark and uninviting,” King said. “We were creating an open and airy Class A lobby space and wanted visitors to clearly see the ornate, coffered ceiling and experience the grand and historic nature of the lobby as they entered.” Revolving Door and Speed Gates Provide Aesthetics and Function King implemented a Boon Edam Crystal Tourniket manual revolving door to lead visitors in the double height lobby space. The Crystal Tournket is constructed virtually completely from glass with only a few stainless steel accents to ensure the solidity of the revolving door. It fits seamlessly with modern glass facades but can also be a beautiful eye catcher in more traditional or classic designs. For employee access, the building’s previous design did not incorporate turnstiles to the elevator banks. “The building did have card reader access, but only at certain doors and locations,” King said. King installed four lanes of Boon Edam Lifeline Speedlane Swing speed gates and two Winglock Swing model access gates to provide secure employee access to the building’s upper floors. The Lifeline Speedlane Swing speed gate manages and channels the flow of people entering and moving around buildings. It employs sensors that detect visitors approaching, with pulsing light strips to guide the user. A sleep function saves on energy use. It can be customised with dimensional and glass choices, including corporate identity colors or other options, so that it either blends-in or stands-out from its surroundings. The Boon Edam Winglock Swing is constructed from stainless steel and a single glass panel, and is unobtrusive in nature and design. The access gate easily manages bi-directional traffic, with LED lights that signal if the gate is in use or on standby. The access gate ties into a manned security desk located near the front doors. Employees gain access to the building through either the Lifeline turnstiles, or a Winglock Swing access gate, while building visitors can receive credentials at the security desk. King said, “We started the process looking at Boon Edam from a security and an aesthetic standpoint. We went through multiple product options but always had a Boon Edam product as the basis of the design. We have been happy with Boon Edam entrance solutions and we are planning to use them again for future projects.”

Reading is a vibrant city that boasts home to some of the largest company UK headquarters such as Microsoft and Pepsico calling this Berkshire county home to their UK head offices. Now, looking to transform the way they work, the retail HQ based in Reading upgraded its large office space to start a new era of work life for its current and future employees. This large refurbishment will see all floors of their existing building being completely reconfigured and re-designed that sees a new cafe/bar and staff gym/studio along with a studio mock shop space and office expansion. Within this project, the interior and exterior were dramatically changed and enhanced utilising fresh entry and security solutions. Contact us to see what we can do for your building. Originally and still currently known in Ireland as Penny’s, these UK headquarters resides in the centre of vibrant Reading. Launching its first clothing store back in 1969, the affordable yet innovative fashion retailer offers shoppers a unique shopping experience with its staple large stores, airy layouts and competitive item pricing. Calling it a ‘workplace of the future’ the new UK HQ spans over 130,000sq ft of redesigned space that homes 580+ employees. The challenge in this project was to unobtrusively implement secured entry solutions that could be stylish in appearance but also provide high-quality functionality. Social Open Space with State-of-the-Art Security With the overall theme being togetherness, collaboration and open workspace, there was a requirement for the building to be secured yet keep the spacious feeling. The challenge in this project was to unobtrusively implement secured entry solutions that could be stylish in appearance but also provide high-quality functionality. The entry solution was to implement a bespoke revolving door, combining a Crystal Tourniket and a framed Tourniket. This customised door benefits from a hidden fully automatic drive in the ceiling that also provides LED down lighting for better user visibility. For security, a bank of tall glass Lifeline Speedlane Swings with a wide-lane setup was specified. Contact us to see what we can do for your building.

Designed by Smart Design Studio, the building is an honest layering of old and new as expressed by the raw treatment of the exterior façade through to the smooth, modern interior. The rooftop addition connects the double-height banks of glass Breezway Louvres with an articulated aluminium roof folding down as a screen to the back of the building. The end result successfully incorporates flexible and functional office interiors and a two-bedroom rooftop apartment within a rigorously controlled contemporary architecture of old and new.

AQURON 1000 penetrating hydrogel treatment was applied to the warehouse floor slabs for curing, sealing and deep hardening for durability.The slabs were poured in very high temperatures. The hydrogel treatment helped preserve the curing quality.This project was Green Star rated. AQURON 1000 is licenced to use the Environmental Choice New Zealand ecolabel, which is recognised by the Green Building Councils of Australia and New Zealand.

London is a vibrant, busy and beautiful city, boasting constant innovation and unique architecture. Now, developments have become bigger and more competitive year on year. With expectations on office workspaces becoming increasingly more open and flexible, the requirement for integratable security has become a complex task. This led to the existing building of 10 Queen Street Place, Riverscape to have a much-needed refurbishment following the trend of open atriums, flexible floor space and usable rooftop space. Within this project, the interior and exterior were dramatically changed and enhanced utilising fresh entry and access control security solutions. Located next to Southwark Bridge and a couple minutes’ walk from the bustling area of Cannon Street Station is Riverscape. Originally opened back in 1980, the multi-storey office space was a modern development that sat on the sought-after area of the River Thames. This project was refurbed from top to bottom, with the original Boon Edam entrance solutions being upgraded to newer more innovative products. The lead architect was Aukett Swanke with interior designers Barr Gazetas leading the design of the refurbishment and, main contractors being Overbury. Working for this project years prior in relation to the old security lanes and revolving doors that were installed by Boon Edam, the London Sales team knew the building and requirements needed. It’s common to see dated installations be retrofitted with newer security products that modernise the look and feel of an entrance as well as upgrade the technology associated with them. Download the Case Study for more information about the project.

A common theme that has swarmed the United Kingdom is the renovation of office space. With a continuously growing workforce, cities across the country are transforming corporate workspaces into multi-level high-quality spaces. The demand for better-graded office space in the city of Glasgow is high. The magnificent development of 191 West George Street has created a vibrant buzz around the cultural city. Known as being within one of the most prominent positions within the City, 191 West George Street stands on the corner of West George Street and Wellington Street. The position encourages an easy commute for the workforce with transport links being a stone’s throw away from the development. Renovated with space and clarity in mind, the atrium stands out with its high-quality materials. The atrium was designed with a sleek set of Lifeline Speedlane Swings.

Known as being positioned within one of the most popular positions within London, The River Building sits comfortably between London Bridge, St Paul’s, and Bank. The position offers enviable commutes for the city workforce, boasting a five minutes’ walk from six key tube stations. Renovated to utilise a once void entrance, The River Building is now a self-contained office space with a contemporary industrial design. The large atrium features a set of sleek black Lifeline Speedlane Swings. Stiff + Trevillion working with Blackstone Group, had specified early into the design process for the Lifeline Speedlane Swing, due to its existing specification in existing projects. The new two-story building boasts a spacious atrium that combines naked brick walling with warm feature lighting and dark tones. Mimicking the interior styling a bank of Lifeline Speedlane Swings were to be finished in black RAL. The River Building with an occupancy density of 1:8 requested comfortable yet stylish entry resulting in a wider lane width configuration. The 615mm passage width utilises two glass wings that offer fast access but give the illusion of openness.

Hospitality and security are often at odds with each other. The challenge is to find the best compromise between Fort Knox and a warm welcome. Telecom company Liberty Global recently carried out a major renovation of their head office in Schiphol-Rijk – the Netherlands. As part of the project, the access security was considerably tightened, without affecting their brand’s desired welcoming appearance. Liberty Global is an international telecommunication and television company. It is also one of the largest internet service providers outside the USA. Liberty Global operates in 14 countries and has 35,000 employees. The head office is based in London and additionally there are central offices in Amsterdam and Denver. Consumer brands that belong to Liberty Global include VodafoneZiggo (50% Joint Venture with Vodafone), Virgin Media, UPC, Unitymedia and Telenet. In the high-quality business park - Schiphol-Rijk, Liberty Global have seven office buildings, which, collectively, employ a total of around 1600 people of 55 nationalities. "We did have manned security at the main entrance, but that solution did not always prevent people from entering our central hall unnoticed," says Simon Kuitert, who holds the position of Corporate Security Manager at Liberty Global. "That is why we introduced a single point of entry for the recent renovation."

Designed by Tempus Design Studio, this project was the winner of the BDAQ Regional Design Awards 2019 – New Houses $750,001 – $1,000,000 Construction Cost. Breezway Louvre Windows are incorporated into the bedrooms, kitchen and alfresco area to offer a number of benefits to the homeowners including fresh air and wide open views out onto the natural surroundings. When closed, they offer protection from the elements so outdoor time can be enjoyed without the worry of the weather changing.

APPLICATION: 52mm Turf CellPROJECT LOCATION: North Ryde NSWPROJECT DETAILS: Macquarie University Permeable Overflow Car ParkPROJECT COMPLETION: March 2017Established in 1964, Macquarie University began as a bold experiment in higher education. Built to break from traditions: to be distinctive, progressive, and to be transformational. Today its pioneering history continues to be a source of inspiration as they celebrate their place among the best and brightest minds.When Macquarie University’s existing cark park became too small for the amount of cars now using it, it was decided to construct an overflow car park. However, not just any car park, but in keeping with their innovative thinking, an environmentally friendly permeable car park. Of course the Atlantis® Turf CellTM system was chosen, so that turf covered parking spaces could be provided.The project required 9,843sq. m of Atlantis® Turf CellTM system, which is constructed from 480mm x 260mm x 52mm panels and has a rigid interlocking clipping system and is made from high quality recycled polypropylene. The project was undertaken by J & G Excavations and Asphalting (NSW) Pty Ltd.The Turf CellTM cells were laid on a bed of permeable soil, and filled with sandy soil and turf was then placed on top of the linked Atlantis® Turf CellTM cells and rolled with a heavy roller to press the roots into the soil in the cells, where they were protected from compaction and could grow freely both horizontally and vertically.The Turf CellTM system is another Atlantis invention, and is specifically suited for car parks, access roads, aircraft taxiways and helicopter landing pads as it has the following features:a high load bearing of approximately 4000t/sq. M;protects the root system of grass from compaction, while allow for vigorous horizontal and vertical root growth;permits surface water absorption and infiltration;has a long use life; andaesthetically, the system allows the grass to fill in completely, creating a lush lawn with an invisible reinforcement structure.

There is a saying that “Everything is Bigger in Texas,” and the Dallas, Texas police department is no exception. The city of Dallas is ranked in the top 10 cities in the U.S. in terms of population, at 1.2 million people. The Dallas Police Department is the ninth largest municipal police force in the U.S., based on 3,012 sworn officers. It is led by Chief of Police, U. Reneé Hall. Security a Concern When Designing HQ Building The department is located in the Jack Evans Police Headquarters building, which was built in 2003. It is 358,000 square feet, has six floors, is spread over a three-acre site, has a separate 1,200 car parking garage and a two-acre, open parking lot for additional visitor parking. Prior to 2003, the department was housed in the circa 1914 former City Hall Building. The Jack Evans Police Headquarters building was under construction when 9/11 terrorists flew airplanes into the World Trade Buildings in New York. That event was preceded by the Oklahoma City Murrah Federal Building bombing in April 1995. Therefore, security was a concern in its design. Police officials worked with a Police Design Consultant – McClaren, Wilson, and Lawrie Architects of Phoenix – to help design the building to resist a terrorist attack and isolate potential hazards. The building also needed to control visitor traffic and access. On an average month, there are 5,000 public visitors to the Jack Evans building. In addition, shots fired at police buildings nationally are not uncommon, says Paul M. Schuster, Senior Corporal/Facilities Management for the Dallas Police Department. “For the most part they are random, single shot drive-by shootings. Often, the officers are unaware that the building has been shot at, until they find a bullet hole in the brick or glass. Increasingly, police tend to be a symbol of government and some citizens see that as a visible target to lash out at. Police officers are trained to expect the routine types of calls, such as domestic violence, traffic accidents, and other crimes. Yet they must be flexible to anticipate the non-routine that can be dangerous and change in a heartbeat.” An Active Shooter Incident Led to an Increase in Security On June 13, 2015, after midnight, a 35-year-old male placed a duffle bag with a remote-controlled bomb to detonate later between cars in the parking lot of the headquarters building. The suspect then began shooting continuously at the lobby windows. Officers responded to the scene, a vehicle chase began, and the incident ended outside the city. Luckily officers in the lobby took cover and were not injured. Following that incident, the Dallas Police Department conducted a security assessment of the building and also at seven patrol stations throughout the city. The assessment included testing various construction materials for bullet resistance to various types of weapons. Gensler Architects and Guidepost Solutions, LLC developed the solutions and plans. “Yesterday we were concerned about handguns, today we are worried about rifles, and the idea of terrorism is always present with outright attack or bombs,” Schuster notes. “The police officers and police staff only want a place that is safe and where they can do their good work.” Funding of $1.3 million was approved to upgrade the lobbies of the seven patrol stations to withstand rifle rounds, and $1.9 million to improve headquarters lobby security, and to upgrade an aging security system. Turner Construction Company and Convergint Technologies, LLC conducted the renovations and security technology integration. Challenges to the Security Design The headquarter’s lobby was initially designed as a two-story glass-walled structure, with an information desk and public records service windows. Visitors were allowed free entry into the lobby and were only screened in an open area to the side if going to other floors. “The challenge in upgrading lobby security was the two-story lobby entrance glass. “In addition, there were concerns about keeping an ‘open’ and friendly service concept in mind and ensuring that the lobby would not resemble a ‘fortress’,” Schuster notes. Screening Room with Security Revolving Doors to Contain Incidents The solution was to keep the existing exterior unchanged and focus on adding a layer of security once a person enters the lobby. Visitors now enter the headquarters and immediately proceed to a side room where security screening is conducted. A new secondary wall with bullet-rated glass and solid bullet resistant wall materials was constructed inside the lobby to channel visitors to the room. Once inside the screening room, which also has bullet resistant walls, the visitor has belongings x-rayed, and they walk through a metal detector. In the event that anyone was to produce a gun and begin shooting, the incident could be contained inside that room. Once a visitor has been cleared, they proceed into the main lobby via a Boon Edam Tourlock 180 security revolving door. This automatic, four-wing door is the most advanced, security revolving door in the Boon Edam product range that offers maximum throughput, allowing users to enter and leave the building simultaneously. In the event that a large number of persons try to force their way into the facility, the Tourlock 180+90 will determine that more than one person is trying to enter and will reject the person and lock out any others from entering. Once a visitor is ready to leave the lobby and exit the building, they pass through another Boon Edam Tourlock 180+90 that leads to a vestibule with exterior swinging doors. In the event that someone tries to go back into the lobby from the front vestibule area, without going through the security screening room, the Tourlock security revolving door will reject their entry.

The new Student Center at Columbia College Chicago, located at 754 South Wabash Avenue in Chicago, opened its doors in the fall of 2019. This brand-new building offers five spectacular stories of spaces for students including music and film-screening rooms, dining options, a fitness centre, a reflection room for meditation and prayer, and event spaces for meetings, performances, and receptions. Columbia College Chicago has a closed campus. In order to enter any building on campus students and staff must have a Columbia ID or visitors must have a valid appointment. The main entrance at the Student Centre is the Tourniket manual revolving door that leads to a public foyer that includes a coffee shop and lounge. Since the speed gates are just past the security desk at the boundary of this area, they serve as a visual and physical indicator of where the public area terminates. Next to the Speedlane Open speed gates, which are notable because they do not have any closing barriers, guards watch as people pass through them to ensure that everyone is scanning their IDs and that the IDs are valid, in which case the speed gate shows a green light. In a situation where a red light shows and the gate alarms, the guard will check the person’s credentials and can try to troubleshoot the ID card. “The decision was really about what creates the least barrier to those entering and exiting the building,” said Dutil. “We don't really want our students to feel like they are overly policed or that our buildings are not accessible to them. So the design of the Open speed gates provided the best solution in terms of controlling access without being obtrusive." Swift Passage While Maintaining Accountability Before the Student Center was built, students entering any campus building would just show their ID to the security officer as they walked past. The administration realised that while this does provide some level of security, it is not foolproof – particularly when many people are entering at the same time for a class. The College’s head of security made the suggestion to install a system that would allow for swift passage of authorised people while maintaining accountability around who enters and exits the building. As anticipated, there was a brief learning curve for the students using the new system. “This was the first system like this on our campus,” said Dutil. “And the first few days that the new Centre was open were also the first few days of school. There were a lot of people new to the campus who required a bit of coaching from guards and our student staff in terms of where to place your card, and to not walk through before you place your card.” Coming Out Ahead of Swinging Doors Dutil confirms that the access systems placed at Boon Edam speed gates are actually outperforming those placed at swing doors across the campus for convenience and adoption. Across the campus, there is a card reader at every swing door entrance of a building where you present your card and a light turns red or green. But oftentimes the card reader is missed, or depending on the placement of the lights and placement of the guard, it can be kind of hit or miss with students walking right by it. “But with the Open speed gates, they're very visible and although they're not a total barrier to entry, they are something that's right in front of you. Because it's very noticable and not easily overlooked, the students have learned pretty quickly to get their ID out. In fact, this was meant to be a test run for the campus to ensure it would be viable and worthwhile for other buildings as well.” Advanced Features Add Value and Flexibility The speed gates have delivered additional benefits beyond basic campus security, according to Dutil. “One of the nice things about a system like this is that we can count visitors to the Student Centre because we get the data of everybody that scans in. So on a busy day for us it's about 2500 people throughout the day. That can range depending on what's going on and what time of year it is. On weekends we're very slow, since there are no classes – maybe 900 to 1200.” “We are a rental venue as well, so we have times where the building is open to non-Columbia College Chicago people for events or other functions. There's a really convenient touch panel right at the security desk called the BoonTouch, where the officer can turn off the turnstiles during those times and then attendees can move through freely without any alarms going off at all.” A New Revolving Door Adds Comfort and Peace of Mind Finally, the Tourniket manual revolving door delivers one additional benefit to the Student Centre, located in a city known for harsh weather. “Revolving doors are always preferred at a building like this that gets a lot of traffic going in and out. We have cold, drafty weather that blows right into our main space at that first floor entry. The revolving door helps to keep the building warm and saves energy and utility costs as well,” said Dutil. “Students feel safe and comfortable entering the building at night,” he concludes. “Our building has a lot of nooks and crannies, and someone can end up alone in a space. And so I think knowing that the only people that are in that building are the ones that are supposed to be there is helpful. Overall, our students appreciate the effort to try to keep them safer.”

ABN Group chose a site in Leederville, WA, for a new state-of-the-art headquarters building. This included a multi-level office, ground floor commercial tenancies, end-of trip facilities, and parking for approximately 160 cars.The project demanded high standards for quality, had a construction time frame of 87 weeks, and was to be five-star Green Star rated.These considerations had an impact on the selection of finish for the car park floors, which is where MARKHAM became involved in the project.AQURON 1000 was selected for enhanced concrete curing, permanent sealing, and deep anti-dust hardening.

The Gateway building In Sydney’s Circular Quay is Australia’s first office tower to use fully integrated touchless 3D fingerprint scanning to allow authorised office workers and guests into the building. The building’s new entrance involves a complex integration of security and technology experts, including Boon Edam, Schindler Lifts, Honeywell and IDEMIA (the manufacturers of MorphoWave fingerprint scanning technology). The solution had to work seamlessly to enhance the user experience and building security for tenants and visitors at the 46-storey landmark building in Sydney’s CBD, owned by Dexus Wholesale Property Fund. Boon Edam delivered the entrance security solution, with Lifeline Speedlane Swing speed gates that are the slimmest in the market, which added to the aesthetics, and helped with design considerations within the width of the lift lobbies. Rising Demand by Tenants for Increased Protection The upgrade project required an entrance security system that incorporated sophisticated security yet kept an aesthetically pleasing and unobtrusive lobby. The ideal solution was found by integrating Boon Edam speed gates, MorphoWave fingerprint scanners mounted on a coordinating pedestal (the Lifeline Boost), Schindler Lift destination control and Honeywell access control technology. This was a response to increasing demands by building occupants to improve the entry security measures to better cater for the protection of employees, visitors and valuable data. A Complex, yet Perfect Orchestration Gateway’s access solution includes a bank of sleek and stylish security speed gates (Boon Edam’s Lifeline Speedlane Swing), which are seamlessly integrated with touchless and intelligent elevator destination control (Schindler Port’s PORT 4 mini) and security access via a biometric fingerprint scanning (IDEMIA’s MorphoWave) – all at one point, enabling quick, accurate and seamless entry to secured areas. These technologies are all controlled by Honeywell’s access control system. Mr Stephen Hodge, Senior Project Manager, Dexus added that “with so many stakeholders, and a strong need for reliability and quality, it was important that everyone knew the goals of the project and worked well together. I’m pleased to say that it was like a perfect jigsaw and everything came together smoothly.” “What was important to Dexus is that we were pushing the boundaries to create better experiences, but we’re only doing so with proven products. Boon Edam’s speed gates have been installed globally and locally, and this gave us added confidence that they were the right product for this forward-looking project,” he said.

54 Mary Street is an office building nestled in the heart of Brisbane. Spanning over 22 levels, it was no small feat for bureau^proberts to carry out a retrofit of the public washrooms. As part of the refurbishment of male, female, and ADA Accessible washrooms across numerous floors, bureau^proberts had to source a large selection of soap dispensers that would be readily available in large quantities – and ideally, in a particular matte black finish. ASI JD Macdonald were perfectly positioned to provide the solution.

About the ProjectIn response to unprecedented demand, Rouse Garden is filling the void of modern-day homes close to trains, shops & jobs at the most competitive price on the market. Featuring the diversity of 1, 2 & 3 bedroom homes, there’s something for everyone in the most wondrous apartments to grace Rouse Hill. From floor to ceiling glass walls, timber hardwood flooring in your living room and a private rooftop garden terrace complete with BBQ and lounge areas. The quality of design is worthy of being marvelled at. Living rooms have been purposed to allow seamless indoor and outdoor transitions, blurring the boundaries between inside and out and elevating your home to new heights.ChallengeWhen you are building in one of the premier locations in Norwest Sydney, it’s all about the ding to match the lifestyle your new residents demand from your new community.  Presented with tight detail, the look, the feel and the performance of your build time-lines, and expectations of high quality, Hydraseal were tasked with working on Rouse Gardens. Waterproofing both the internals and roof of the building, the builder demanded warranties to match the project requirements and to deliver a quality finish demanded of this high profile project.To streamline this project, availability of stock and ease of application were key product requirements needed from the project, which Tremco were tasked with delivering.Tremco SolutionVulkem H2 Plus, Vulkem NEM, Tremflex50, Vulkem 951Hydraseal partnered with Tremco for a few reasons, primarily trust built up through a longstanding relationship provided the support necessary for the key for the success in this project.The versatility of Vulkem NEM being able to be used for internal wet areas, in conjunction with Vulkem H2, as well as for outdoor areas under Vulkem 951 NF allowed for fast and consistent application of waterproofing on the project, given the tight time frames, all backed with long warranties to match product performance.The combination of Vulkem NEM, Vulkem 951 NF and Vulkem H2 provided the warranties demanded by the builder which resulted in both Builder, and Applicator very satisfied with the job. 

At Bostik, innovation comes in many forms.Ultraset® 3 in 1 is Bostik Australia's premium timber floor adhesive incorporating Thickness Control™ Spacer Technology, a proprietary feature consisting of recycled, ground-up car tyres mixed throughout the adhesive.When applied, the Thickness Control™ Spacers act like tiny rubber pillars, suspending the timber and maintaining optimal adhesive thickness to ensure superior performance as a moisture and impact sound reduction membrane.For West Side Place, Ultraset® 3 in 1 presented significant time and cost savings vs conventional multi-layer acoustic systems by eliminating the need to install a separate moisture barrier, acoustic underlay and additional layers of adhesive. Efficiencies that flowed directly onto the construction team, supporting trades and ultimately the developer, delivering a high performance solution within budget, ahead of schedule all the while guaranteeing a compliant and comfortable environment.

Decorative flake floor installed in a residential garage.

About the ProjectThe ANZAC Memorial was designed as a sculptural monument, a unique collaboration between Architect Charles Bruce Dellit and sculptor George Rayner Hoff; it is arguably one of the finest examples of the union of architecture and art in Australia.The building is a striking architectural form, symmetrical on both axes. It uses elements reminiscent of traditional Gothic architecture (buttresses, cathedral windows, high ceilings) in the Art Deco style. The Memorial is adorned externally with twenty sculptures representing the units of the Australian Imperial Force (AIF). These are the sentinels of the building, keeping watch while representing the fallen to whom the building is dedicated.Bruce Dellit’s vision for the Memorial included a still pool bounded by poplars to the north of the building (included for their significant symbolic association with the battles in France and Belgium), and a cascading fountain to the south.The Hall of Service, at the centre of the Centenary Extension, is a civic space that architecturally and artistically mirrors the Hall of Silence. The Hall was named in acknowledgment of the original Memorial halls and to recognise more than a century of service by Australian servicemen and servicewomen. At the threshold to the space are the words: “NSW Service with and for All Australians”.The ChallengeWhen restoring a National War Monument visited by hundreds of thousands of people, you need to provide the highest quality results and finishes expected of such a significant structure in our history. The challenge here, comes from creating a restoration solution on a building which was designed in the early 1930’s, which will be flexible enough to maintain the architects core design features but also created and executed within a tight time frame in time for ANZAC day. The solution needed to encompass modern technology with traditional design features to ensure the restoration lasts for the next 100 years as a memorial to our fallen heroes.Tremco SolutionTremco worked closely with Sure Seal and Built to provide a solution which was both timely and high quality. the installers long standing relationship with Tremco, a number of unique solutions, together with a 20 year warranty period proved a success.Over 15,000m2 of Tremco products were installed on this historic site. Tremco provided regular iAudit reports on the job site (iAudits is a quality control measure used to ensure the products are being applied consistently to maintain warranty conditions) During regular site visits, Tremco were able to provide a high level of customised Technical information and design advice to ensure the project ran smoothly and to Built’s expectations.

Leading Australian community bank, IMB Bank, has installed a series of Boon Edam entrances, including all glass revolving doors, slimline speedgates and a swing access gate at its new building in Wollongong, NSW.IMB moved into the new building in early 2021, and immediately sought to make the entrance open and welcoming to visitors, with entrance security inside to protect valuable data, intellectual property and people.The Boon Edam technology selected is among the most stylish and efficient of the Boon Edam range used by major banks locally, Fortune 500 companies globally, and corporate HQs in 27 countries.The exterior of the building has two Boon Edam Crystal Tourniket all-glass revolving doors, which create a striking first impression. Inside, there are three Speedlane Lifeline Swing speedgates, including one wide lane suitable for disabled access. In one section, there is also a Winglock Swing access gate that separates off a designated meeting space.“After reviewing a range of product proposals, we found that Boon Edam’s range had the ideal combination of aesthetics and security that IMB was seeking,” said IMB Head of Facilities, Greg Dowd.“The security speedgates give us greater control over access to the building, and they alert us to any tailgating or access breaches. Limiting access to only authorised personnel not only protects our staff, but it also protects the data of our customers, which we always store securely,” he said.“As a further advantage, the Boon Edam team integrated the access control system with our RFID (Radio-Frequency Identification) system. This was a big help, because it meant the speedgates were sending data directly to our existing system.”Boon Edam Managing Director, Michael Fisher, says this impressive project will serve as a new benchmark for local financial institutions. “IMB has set the bar high with it’s new Wollongong facility. Every design element has been carefully thought out to be welcoming to visitors and intuitive to employees. We are delighted to have been selected to contribute to the success of this project.”“Boon Edam is a family-owned organisation with a history extending back nearly 150 years, so it is particularly satisfying to work with a community-minded company like IMB, with a similarly long and successful history,” said Mr Fisher.Responsive serviceIn addition to elegant aesthetics and intelligent security, IMB sought an entrance security partner with attentive service throughout the entire project, and then into after-sales service too.“The Boon Edam team was highly professional to work with, and responded adaptively to our needs. Early mornings were the best time for installation work, and their service team accommodated this need right from the start, without a hassle,” said Mr Dowd.“It was clear that Boon Edam takes great care in its products, and that its values as a company were aligned with IMB’s, which are strongly focused on community, family and quality.”Elegant aestheticsBoon Edam’s Speedlane Lifeline series is one of the slimmest on the market, with the cabinet housing measuring as little as 106mm. The slim nature of the speedgate makes it ideal for narrow entrances, lobbies and foyers, where sometimes an extra lane can be added due to its compact size.“The slim design and finishes of the speedgates was what attracted us to the Boon Edam product in the first place. Their overall designs are sleek, modern and in keeping with our foyer design. We could also customise the materials and colours to suit our foyer, and that really sealed the deal,” said Mr Dowd.“For the front entrance, we couldn’t look past an all-glass revolving door. It lets in an abundance of natural light, making the entire foyer a welcoming space for visitors and employees,” he said.Boon Edam’s Crystal Tourniket doors – available in single and multiple entrance options up to 3.5m diameter and height – are being introduced to Australasia after being proven internationally.The Crystal Tourniket is fully compliant with Australian Standard AS1288 (Glass in Buildings), which specifies safe glazing and installation practices when using glass in buildings.“The other Boon Edam product, the Winglock Swing, provides the ideal separation for our meeting space, without needing a full length Speedlane. It’s finishes and design also perfectly match the rest of our foyer,” said Mr Dowd.Boon Edam’s Winglock Swing is constructed from stainless steel and a single glass panel, creating an access gate that is elegant and unobtrusive in nature and design. Winglock is designed to manage bi-directional traffic with effortless ease, using smart, intuitive technology to guide each visitor through to their destination without delay or inconvenience.

Decorative flake flooring in a residential garage and sunroom.

SAS International designed and manufactured a range of solutions for the new 75,000 square metres Terminal 2 at Dublin Airport, Ireland. According to Dublin Airport the new second terminal will be capable of comfortably handling up to 15 million passengers per year. Specification demanded that durability, ease of maintenance and acoustics were considered. SAS International worked with architects Pascall + Watson to design the ceiling solution answering the architect’s brief to factor in ongoing maintenance conducted by Facilities Management teams in the future. The design of these large sized ceiling panels required careful consideration at design stage to ensure they would be manageable when working at a height. Designed and developed specifically for Dublin Airport was 35,000 square metres of ceiling systems, installed in the main departure area, walkways and baggage handling areas. This solution looks like any other suspended metal ceiling system as it provides an aesthetically pleasing flush finish. But where this product differs is its ingenious way of allowing access to the ceiling void and services for ongoing essential maintenance. This is of particular benefit in high traffic areas such as Dublin airport as it enables a corridor to remain in use rather than having to close off the entire route. SAS International manufactured the 20,000m2 of large aluminium frames for the fabric ceilings which creates a striking central feature. Working closely with SAS International were local installers Platt and Reilly who applied the stretched fabric to the frames on-site and hoisted them into position. Creating a comfortable environment for traveller and worker was helped with the use of acoustic floating rafts and perforated metal ceiling solutions (with integrated acoustic pads) to provide the necessary acoustic control for this project. Lighting was suspended neatly between the rafts to also provide a modern finish to the corridors. In addition Perimeter heating and air handling grilles also enhance the experience.

Decorative flake flooring in a residential garage.

Decorative flake flooring on a residential patio.

Part of a vast regeneration programme to improve student amenities, the UoB invested £60m in a state-of-the-art academic library. The project aimed to celebrate the wider campus architectural styles and improve access to new resources like e-journals and wireless charging stations. Associated Architects chose SAS International to provide the high acoustic and finishing touches to the academic interior fit-out. In order to create an effective library environment, acoustic performance must also be carefully considered. With the aim to create a space suited for thousands of scholars, bespoke acoustic metal wall panels were supplied to the library. Depending on the location of each tile, the panels were finished in white and black-grey PPC or anodised in regency gold. Specified with a 23% or 50% open area, the panels act as acoustic absorbers with an oblong perforation. Each panel is fitted with a black, fleece-wrapped acoustic pad for high performance. The architects specified three additional acoustic treatments for open soffit areas over computer clusters and lounge spaces. SAS500 baffles and bespoke ring shaped and circular rafts were created by SAS International to fulfil this requirement. The discs and raft-halos are an SAS150 hybrid designed to fulfil acoustic and service requirements while contributing to the contemporary look. Consisting of multiple panels, the concealed grid system creates a smooth finish enclosed using a steel perimeter trim. Long 3m baffles were also installed in a continuous sequence along walkways and group study areas. These options provide durable acoustic solution, minimising maintenance and improving access to the soffit and services.

Decorative metallic flooring in a Baskin Robbins store.

Decorative metallic floor in an inner-city cafe.

Decorative epoxy flooring with concrete finish in retail outlet.

To maintain the property’sfirm environmental focus, the project team specified Holcim’sflagship product – ECOPact Zero concrete.

Decorative metallic flooring in residential bedrooms and hallway.

Protective epoxy flooring in a large warehouse and manufacturing facility.